Mouse code for the MacroRat
Diff: mbed-dev/targets/TARGET_NORDIC/TARGET_MCU_NRF51822/device/TOOLCHAIN_GCC_ARM/startup_NRF51822.S
- Revision:
- 18:6a4db94011d3
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/mbed-dev/targets/TARGET_NORDIC/TARGET_MCU_NRF51822/device/TOOLCHAIN_GCC_ARM/startup_NRF51822.S Sun May 14 23:18:57 2017 +0000 @@ -0,0 +1,250 @@ +/* +Copyright (c) 2013, Nordic Semiconductor ASA +All rights reserved. + +Redistribution and use in source and binary forms, with or without +modification, are permitted provided that the following conditions are met: + +* Redistributions of source code must retain the above copyright notice, this + list of conditions and the following disclaimer. + +* Redistributions in binary form must reproduce the above copyright notice, + this list of conditions and the following disclaimer in the documentation + and/or other materials provided with the distribution. + +* Neither the name of Nordic Semiconductor ASA nor the names of its + contributors may be used to endorse or promote products derived from + this software without specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE +FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL +DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR +SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER +CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, +OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +*/ + +/* +NOTE: Template files (including this one) are application specific and therefore +expected to be copied into the application project folder prior to its use! +*/ + + .syntax unified + .arch armv6-m + + .section .stack + .align 3 +#ifdef __STACK_SIZE + .equ Stack_Size, __STACK_SIZE +#else + .equ Stack_Size, 2048 +#endif + .globl Stack_Size + .globl __StackTop + .globl __StackLimit +__StackLimit: + .space Stack_Size + .size __StackLimit, . - __StackLimit +__StackTop: + .size __StackTop, . - __StackTop + + .section .heap + .align 3 + .globl __HeapBase + .globl __HeapLimit + + .section .Vectors + .align 2 + .globl __Vectors +__Vectors: + .long __StackTop /* Top of Stack */ + .long Reset_Handler /* Reset Handler */ + .long NMI_Handler /* NMI Handler */ + .long HardFault_Handler /* Hard Fault Handler */ + .long 0 /* Reserved */ + .long 0 /* Reserved */ + .long 0 /* Reserved */ + .long 0 /* Reserved */ + .long 0 /* Reserved */ + .long 0 /* Reserved */ + .long 0 /* Reserved */ + .long SVC_Handler /* SVCall Handler */ + .long 0 /* Reserved */ + .long 0 /* Reserved */ + .long PendSV_Handler /* PendSV Handler */ + .long SysTick_Handler /* SysTick Handler */ + + /* External Interrupts */ + .long POWER_CLOCK_IRQHandler /*POWER_CLOCK */ + .long RADIO_IRQHandler /*RADIO */ + .long UART0_IRQHandler /*UART0 */ + .long SPI0_TWI0_IRQHandler /*SPI0_TWI0 */ + .long SPI1_TWI1_IRQHandler /*SPI1_TWI1 */ + .long 0 /*Reserved */ + .long GPIOTE_IRQHandler /*GPIOTE */ + .long ADC_IRQHandler /*ADC */ + .long TIMER0_IRQHandler /*TIMER0 */ + .long TIMER1_IRQHandler /*TIMER1 */ + .long TIMER2_IRQHandler /*TIMER2 */ + .long RTC0_IRQHandler /*RTC0 */ + .long TEMP_IRQHandler /*TEMP */ + .long RNG_IRQHandler /*RNG */ + .long ECB_IRQHandler /*ECB */ + .long CCM_AAR_IRQHandler /*CCM_AAR */ + .long WDT_IRQHandler /*WDT */ + .long RTC1_IRQHandler /*RTC1 */ + .long QDEC_IRQHandler /*QDEC */ + .long LPCOMP_IRQHandler /*LPCOMP */ + .long SWI0_IRQHandler /*SWI0 */ + .long SWI1_IRQHandler /*SWI1 */ + .long SWI2_IRQHandler /*SWI2 */ + .long SWI3_IRQHandler /*SWI3 */ + .long SWI4_IRQHandler /*SWI4 */ + .long SWI5_IRQHandler /*SWI5 */ + .long 0 /*Reserved */ + .long 0 /*Reserved */ + .long 0 /*Reserved */ + .long 0 /*Reserved */ + .long 0 /*Reserved */ + .long 0 /*Reserved */ + + + .size __Vectors, . - __Vectors + +/* Reset Handler */ + + .equ NRF_POWER_RAMON_ADDRESS, 0x40000524 + .equ NRF_POWER_RAMON_RAMxON_ONMODE_Msk, 0x3 + + .text + .thumb + .thumb_func + .align 1 + .globl Reset_Handler + .type Reset_Handler, %function +Reset_Handler: + .fnstart + +/* Make sure ALL RAM banks are powered on */ + LDR R0, =NRF_POWER_RAMON_ADDRESS + LDR R2, [R0] + MOVS R1, #NRF_POWER_RAMON_RAMxON_ONMODE_Msk + ORRS R2, R1 + STR R2, [R0] + +/* Loop to copy data from read only memory to RAM. The ranges + * of copy from/to are specified by following symbols evaluated in + * linker script. + * __etext: End of code section, i.e., begin of data sections to copy from. + * __data_start__/__data_end__: RAM address range that data should be + * copied to. Both must be aligned to 4 bytes boundary. */ + + ldr r1, =__etext + ldr r2, =__data_start__ + ldr r3, =__data_end__ + + subs r3, r2 + ble .LC0 + +.LC1: + subs r3, 4 + ldr r0, [r1,r3] + str r0, [r2,r3] + bgt .LC1 +.LC0: + + LDR R0, =SystemInit + BLX R0 + LDR R0, =_start + BX R0 + + .pool + .cantunwind + .fnend + .size Reset_Handler,.-Reset_Handler + + .section ".text" + + +/* Dummy Exception Handlers (infinite loops which can be modified) */ + + .weak NMI_Handler + .type NMI_Handler, %function +NMI_Handler: + B . + .size NMI_Handler, . - NMI_Handler + + + .weak HardFault_Handler + .type HardFault_Handler, %function +HardFault_Handler: + B . + .size HardFault_Handler, . - HardFault_Handler + + + .weak SVC_Handler + .type SVC_Handler, %function +SVC_Handler: + B . + .size SVC_Handler, . - SVC_Handler + + + .weak PendSV_Handler + .type PendSV_Handler, %function +PendSV_Handler: + B . + .size PendSV_Handler, . - PendSV_Handler + + + .weak SysTick_Handler + .type SysTick_Handler, %function +SysTick_Handler: + B . + .size SysTick_Handler, . - SysTick_Handler + + +/* IRQ Handlers */ + + .globl Default_Handler + .type Default_Handler, %function +Default_Handler: + B . + .size Default_Handler, . - Default_Handler + + .macro IRQ handler + .weak \handler + .set \handler, Default_Handler + .endm + + IRQ POWER_CLOCK_IRQHandler + IRQ RADIO_IRQHandler + IRQ UART0_IRQHandler + IRQ SPI0_TWI0_IRQHandler + IRQ SPI1_TWI1_IRQHandler + IRQ GPIOTE_IRQHandler + IRQ ADC_IRQHandler + IRQ TIMER0_IRQHandler + IRQ TIMER1_IRQHandler + IRQ TIMER2_IRQHandler + IRQ RTC0_IRQHandler + IRQ TEMP_IRQHandler + IRQ RNG_IRQHandler + IRQ ECB_IRQHandler + IRQ CCM_AAR_IRQHandler + IRQ WDT_IRQHandler + IRQ RTC1_IRQHandler + IRQ QDEC_IRQHandler + IRQ LPCOMP_IRQHandler + IRQ SWI0_IRQHandler + IRQ SWI1_IRQHandler + IRQ SWI2_IRQHandler + IRQ SWI3_IRQHandler + IRQ SWI4_IRQHandler + IRQ SWI5_IRQHandler + + + .end