Mouse code for the MacroRat
Diff: mbed-dev/targets/TARGET_NORDIC/TARGET_MCU_NRF51822/TARGET_RBLAB_NRF51822/PinNames.h
- Revision:
- 18:6a4db94011d3
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/mbed-dev/targets/TARGET_NORDIC/TARGET_MCU_NRF51822/TARGET_RBLAB_NRF51822/PinNames.h Sun May 14 23:18:57 2017 +0000 @@ -0,0 +1,193 @@ +/* mbed Microcontroller Library + * Copyright (c) 2013 Nordic Semiconductor + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ +#ifndef MBED_PINNAMES_H +#define MBED_PINNAMES_H + +#include "cmsis.h" + +#ifdef __cplusplus +extern "C" { +#endif + +typedef enum { + PIN_INPUT, + PIN_OUTPUT +} PinDirection; + +#define PORT_SHIFT 3 + +typedef enum { + p0 = 0, + p1 = 1, + p2 = 2, + p3 = 3, + p4 = 4, + p5 = 5, + p6 = 6, + p7 = 7, + p8 = 8, + p9 = 9, + p10 = 10, + p11 = 11, + p12 = 12, + p13 = 13, + p14 = 14, + p15 = 15, + p16 = 16, + p17 = 17, + p18 = 18, + p19 = 19, + p20 = 20, + p21 = 21, + p22 = 22, + p23 = 23, + p24 = 24, + p25 = 25, + p26 = 26, + p27 = 27, + p28 = 28, + p29 = 29, + p30 = 30, +// p31=31, + + P0_0 = p0, + P0_1 = p1, + P0_2 = p2, + P0_3 = p3, + P0_4 = p4, + P0_5 = p5, + P0_6 = p6, + P0_7 = p7, + + P0_8 = p8, + P0_9 = p9, + P0_10 = p10, + P0_11 = p11, + P0_12 = p12, + P0_13 = p13, + P0_14 = p14, + P0_15 = p15, + + P0_16 = p16, + P0_17 = p17, + P0_18 = p18, + P0_19 = p19, + P0_20 = p20, + P0_21 = p21, + P0_22 = p22, + P0_23 = p23, + + P0_24 = p24, + P0_25 = p25, + P0_26 = p26, + P0_27 = p27, + P0_28 = p28, + P0_29 = p29, + P0_30 = p30, + + LED1 = p15, + LED2 = p15, + LED3 = p15, + LED4 = p15, + + BUTTON1 = p16, + BUTTON2 = p17, + + RX_PIN_NUMBER = p11, + TX_PIN_NUMBER = p9, + CTS_PIN_NUMBER = p10, + RTS_PIN_NUMBER = p8, + + // mBed interface Pins + USBTX = TX_PIN_NUMBER, + USBRX = RX_PIN_NUMBER, + + SPI_PSELMOSI0 = p20, + SPI_PSELMISO0 = p22, + SPI_PSELSS0 = p14, + SPI_PSELSCK0 = p25, + + SPI_PSELMOSI1 = p20, + SPI_PSELMISO1 = p22, + SPI_PSELSS1 = p14, + SPI_PSELSCK1 = p25, + + SPIS_PSELMOSI = p20, + SPIS_PSELMISO = p22, + SPIS_PSELSS = p14, + SPIS_PSELSCK = p25, + + I2C_SDA0 = p29, + I2C_SCL0 = p28, + +/* + I2C_SDA1 = p13, + I2C_SCL1 = p15, +*/ + + D0 = p11, + D1 = p9, + D2 = p10, + D3 = p8, + D4 = p21, + D5 = p23, + D6 = p16, + D7 = p17, + + D8 = p19, + D9 = p18, + D10 = p14, + D11 = p12, + D12 = p13, + D13 = p15, + + D14 = p29, // I2C - SDA + D15 = p28, // I2C - SCL + + D16 = p25, // SPI - SCK + D17 = p22, // SPI - MISO + D18 = p20, // SPI - MOSI + + A0 = p1, + A1 = p2, + A2 = p3, + A3 = p4, + A4 = p5, + A5 = p6, + + D19 = A0, + D20 = A1, + D21 = A2, + D22 = A3, + D23 = A4, + D24 = A5, + + // Not connected + NC = (int)0xFFFFFFFF +} PinName; + +typedef enum { + PullNone = 0, + PullDown = 1, + PullUp = 3, + PullDefault = PullUp +} PinMode; + +#ifdef __cplusplus +} +#endif + +#endif