Fork of BlueNRG library to be compatible with bluetooth demo application
Dependents: Nucleo_BLE_Demo Nucleo_BLE_Demo
Fork of Nucleo_BLE_BlueNRG by
Diff: hci/inc/ble_status.h
- Revision:
- 0:a948f5f3904c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/hci/inc/ble_status.h Fri Dec 19 18:56:07 2014 +0000 @@ -0,0 +1,131 @@ +/******************** (C) COPYRIGHT 2012 STMicroelectronics ******************** +* File Name : ble_status.h +* Author : AMS - HEA&RF BU +* Version : V1.0.0 +* Date : 19-July-2012 +* Description : Header file with BLE Stack status codes. +******************************************************************************** +* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS +* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. +* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, +* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE +* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING +* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. +*******************************************************************************/ +#ifndef __BLE_STATUS_H__ +#define __BLE_STATUS_H__ + +#include <hal_types.h> + + +/** @defgroup ble_status Bluetooth Status/Error Codes + * @{ + */ + +typedef tHalUint8 tBleStatus; + +/* Error Codes as specified by the specification + * according to the spec the error codes range + * from 0x00 to 0x3F + */ +#define ERR_CMD_SUCCESS (0x00) +#define BLE_STATUS_SUCCESS (0x00) +#define ERR_UNKNOWN_HCI_COMMAND (0x01) +#define ERR_UNKNOWN_CONN_IDENTIFIER (0x02) + +#define ERR_AUTH_FAILURE (0x05) +#define ERR_PIN_OR_KEY_MISSING (0x06) +#define ERR_MEM_CAPACITY_EXCEEDED (0x07) +#define ERR_CONNECTION_TIMEOUT (0x08) + +#define ERR_COMMAND_DISALLOWED (0x0C) + +#define ERR_UNSUPPORTED_FEATURE (0x11) +#define ERR_INVALID_HCI_CMD_PARAMS (0x12) +#define ERR_RMT_USR_TERM_CONN (0x13) +#define ERR_RMT_DEV_TERM_CONN_LOW_RESRCES (0x14) +#define ERR_RMT_DEV_TERM_CONN_POWER_OFF (0x15) +#define ERR_LOCAL_HOST_TERM_CONN (0x16) + +#define ERR_UNSUPP_RMT_FEATURE (0x1A) + +#define ERR_INVALID_LMP_PARAM (0x1E) +#define ERR_UNSPECIFIED_ERROR (0x1F) + +#define ERR_LL_RESP_TIMEOUT (0x22) +#define ERR_LMP_PDU_NOT_ALLOWED (0x24) + +#define ERR_INSTANT_PASSED (0x28) + +#define ERR_PAIR_UNIT_KEY_NOT_SUPP (0x29) +#define ERR_CONTROLLER_BUSY (0x3A) + +#define ERR_DIRECTED_ADV_TIMEOUT (0x3C) + +#define ERR_CONN_END_WITH_MIC_FAILURE (0x3D) + +#define ERR_CONN_FAILED_TO_ESTABLISH (0x3E) + + +/** + * Generic/System error codes + * starts with 0x40 + */ + +#define BLE_STATUS_FAILED (0x41) +#define BLE_STATUS_INVALID_PARAMS (0x42) +#define BLE_STATUS_BUSY (0x43) +#define BLE_STATUS_INVALID_LEN_PDU (0x44) +#define BLE_STATUS_PENDING (0x45) +#define BLE_STATUS_NOT_ALLOWED (0x46) +#define BLE_STATUS_ERROR (0x47) + +/** + * flash error codes + * starts with 0x49 + */ +#define FLASH_READ_FAILED (0x49) +#define FLASH_WRITE_FAILED (0x4A) +#define FLASH_ERASE_FAILED (0x4B) + +/** + * L2CAP error codes + * starts with 0x50 + */ +#define BLE_STATUS_INVALID_CID (0x50) + +/* + * timer error codes + * starts with 0x54 + */ +#define TIMER_NOT_VALID_LAYER (0x54) +#define TIMER_INSUFFICIENT_RESOURCES (0x55) + +/** + * SM error codes + * starts with 0x5A + */ +#define BLE_STATUS_CSRK_NOT_FOUND (0x5A) +#define BLE_STATUS_IRK_NOT_FOUND (0x5B) +#define BLE_STATUS_DEV_NOT_FOUND_IN_DB (0x5C) +#define BLE_STATUS_SEC_DB_FULL (0x5D) +#define BLE_STATUS_DEV_NOT_BONDED (0x5E) + + /** + * Gatt Error Codes + * starts with 0x60 + */ +#define BLE_STATUS_INVALID_HANDLE (0x60) +#define BLE_STATUS_INVALID_PARAMETER (0x61) +#define BLE_STATUS_OUT_OF_HANDLE (0x62) +#define BLE_STATUS_INVALID_OPERATION (0x63) +#define BLE_STATUS_INSUFFICIENT_RESOURCES (0x64) +#define BLE_INSUFFICIENT_ENC_KEYSIZE (0x65) +#define BLE_STATUS_CHARAC_ALREADY_EXISTS (0x66) + +/** + * @} + */ + + +#endif /* __BLE_STATUS_H__ */