![](/media/cache/group/default_image.jpg.50x50_q85.jpg)
Encoder test(rotation sensor) for CORE-1000
Dependencies: mbed
Diff: main.cpp
- Revision:
- 0:75e3cf27c60b
- Child:
- 1:38643472f93f
diff -r 000000000000 -r 75e3cf27c60b main.cpp --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/main.cpp Mon Dec 31 15:22:03 2012 +0000 @@ -0,0 +1,100 @@ +#include "mbed.h" + +DigitalIn phaseA( p5 ); // phase a of the quadrature encoder +DigitalIn phaseB( p6 ); // phase b of the quadrature encoder + +int encoderClickCount = 0; // hold the signed value corresponding to the number of clicks left or right since last sample +int previousEncoderState = 0; // keep a record of the last actioned sample state of the Qb+Qa outputs for comparison on each interrupt + +void quadratureDecoder( void ) +{ + int currentEncoderState = (phaseB.read() << 1) + phaseA.read(); // create a two bit value out of phaseB and phaseA + + if( currentEncoderState == previousEncoderState ) + { + return; + } + + switch( previousEncoderState ) + { + case 0: + if( currentEncoderState == 1 ) + { + encoderClickCount--; + } + else if( currentEncoderState == 2 ) + { + encoderClickCount++; + } + break; + + case 1: + if( currentEncoderState == 3 ) + { + encoderClickCount--; + } + else if( currentEncoderState == 0 ) + { + encoderClickCount++; + } + break; + + case 2: + if( currentEncoderState == 0 ) + { + encoderClickCount--; + } + else if( currentEncoderState == 3 ) + { + encoderClickCount++; + } + break; + + case 3: + if( currentEncoderState == 2 ) + { + encoderClickCount--; + } + else if( currentEncoderState == 1 ) + { + encoderClickCount++; + } + break; + + default: + break; + } + previousEncoderState = currentEncoderState; +} + + // read the rotation accumulator, and once read, reset it to zero +int getClicks( void ) +{ + int res = encoderClickCount; // this allows the knob to be rotated "while im not looking at it' and still return the + + encoderClickCount = 0; // actual number of clicks that have been rotated since last time I was checking it. + + return res; +} + +int main() +{ + Serial pc( USBTX, USBRX ); + Ticker sampleTicker; // create a timer to sample the encoder + int currentClicks; + + phaseA.mode( PullUp ); // phaseA is set with a built in pull-up resistor + phaseB.mode( PullUp ); // phaseB is set with a built in pull-up resistor + sampleTicker.attach_us( &quadratureDecoder, 1000 ); // make the quadrature decoder function check the knob once every 1000us = 1ms + + pc.printf( "Encoder test started\r\n" ); + while( 1 ) + { + currentClicks = getClicks(); + if( currentClicks != 0 ) + { + pc.printf( "click count = %d,%d\r\n", currentClicks, previousEncoderState ); + } + wait_ms( 200 ); + } +}