AS3935 Lightning sensor library
Fork of AS3935 by
include the mbed library with this snippet
#include "mbed.h" #include "AS3935.h" // frdm-kl25z sd card connections for spi1 // ------------------------------------------------ // Header -- kl25z -- SD/MMC // J2-20 -- PTE1 -- MOSI // J9-13 -- PTE4 -- CS // J2-14 -- GND -- Vss (GND) // J9-9 -- PTE2 -- SCK // J9-11 -- PTE3 -- MISO AS3935 ld(PTE1, PTE3, PTE2, PTE4, "ld", 100000); // MOSI, MISO, SCK, CS, SPI bus freq (hz) InterruptIn IntLightning(PTA12); //IRQ AS3935 DigitalOut led1(LED_RED); Serial pc(USBTX, USBRX); void DetectLightning() { char OriginInt; wait_ms(2); OriginInt = ld.interruptSource(); if (OriginInt == 1) { // pc.printf(" Noise level too high\r\n"); } if (OriginInt == 4) { // pc.printf(" Disturber\r\n"); } if (OriginInt == 8) { // detection // pc.printf(" Lightning detection\r\n"); pc.printf(" Lightning detection, distance=%dkm\r\n", ld.lightningDistanceKm()); ld.clearStats(); } } int main() { pc.baud(9600); pc.printf("\r\nstart lightning detector\r\n"); //initialisations ld.reset(); ld.setTuneCap(5); // 500kHz ld.powerUp(); ld.setIndoors(); ld.setMinimumLightnings(1); //ld.setSpikeRejection(2); ld.setNoiseFloor(2); ld.disableDisturbers(); //ld.enableDisturbers(); ld.setWatchdogThreshold(2); wait_ms(10); IntLightning.rise(&DetectLightning); int MinBlysk = ld.getMinimumLightnings(); int Noise = ld.getNoiseFloor(); int TuneCap = ld.getTuneCap(); int SpikeRej = ld.getSpikeRejection(); int WatchDog = ld.getWatchdogThreshold(); pc.printf(" Min wylad: %i", MinBlysk); pc.printf("\r\n"); pc.printf(" Noise: %i", Noise); pc.printf("\r\n"); pc.printf(" Tune CAP: %i", TuneCap); pc.printf("\r\n"); pc.printf(" Spike rej: %i", SpikeRej); pc.printf("\r\n"); pc.printf(" Watchdog: %i", WatchDog); pc.printf("\r\n"); while(1) { led1 = ! led1; wait(0.2); } }
Diff: AS3935.cpp
- Revision:
- 4:ab1f1b65468b
- Parent:
- 3:c536a9aa2a1c
- Child:
- 5:28311803e23d
diff -r c536a9aa2a1c -r ab1f1b65468b AS3935.cpp --- a/AS3935.cpp Thu Jun 11 19:45:11 2015 +0000 +++ b/AS3935.cpp Mon Jun 15 14:27:34 2015 +0000 @@ -95,6 +95,21 @@ wait_ms(2); } +void AS3935::presetDefault() + { + m_Cs = 0; + m_Spi.write(0x3C); + m_Spi.write(0x96); + m_Cs = 1; + wait_ms(2); +} + +void AS3935::init() + { + presetDefault(); + registerWrite(AS3935_WDTH, 0x04); // set WDTH level to 4 +} + void AS3935::powerDown() { registerWrite(AS3935_PWD,1); @@ -216,9 +231,9 @@ m_Spi.write(0x96); m_Cs = 1; wait_ms(1); // wait 1ms - registerWrite(0x08, 0x40, 0x40); // ERRATA: after power down mode + registerWrite(AS3935_DISP_SRCO, 0x40); // ERRATA: after power down mode wait_ms(2); // wait 1ms - registerWrite(0x08, 0x40, 0x00); // ERRATA: after power down mode + registerWrite(AS3935_DISP_SRCO, 0x00); // ERRATA: after power down mode trco=registerRead(0x3A, 0x80); // Read out Calibration of TRCO done srco=registerRead(0x3B, 0x80); // Readout Calibration of SRCO done if(trco != 0x00 && srco != 0x00)