Capstone
SX1276 library for modtronix inair9. Edited for use with NRF51DK board.
Fork of
SX1276Lib_modtronix
by 
modtronix H
sx1276/sx1276.cpp
- Committer:
- modtronix
- Date:
- 2015-05-13
- Revision:
- 22:20db480143c9
- Parent:
- 20:7cf7c08f0088
- Child:
- 25:72381be1b0ce
File content as of revision 22:20db480143c9:
/*
/ _____) _ | |
( (____ _____ ____ _| |_ _____ ____| |__
\____ \| ___ | (_ _) ___ |/ ___) _ \
_____) ) ____| | | || |_| ____( (___| | | |
(______/|_____)_|_|_| \__)_____)\____)_| |_|
( C )2014 Semtech
Description: Actual implementation of a SX1276 radio, inherits Radio
License: Revised BSD License, see LICENSE.TXT file include in the project
Maintainers: Miguel Luis, Gregory Cristian and Nicolas Huguenin
*/
#include "sx1276.h"
const FskBandwidth_t SX1276::FskBandwidths[] =
{
{ 2600 , 0x17 },
{ 3100 , 0x0F },
{ 3900 , 0x07 },
{ 5200 , 0x16 },
{ 6300 , 0x0E },
{ 7800 , 0x06 },
{ 10400 , 0x15 },
{ 12500 , 0x0D },
{ 15600 , 0x05 },
{ 20800 , 0x14 },
{ 25000 , 0x0C },
{ 31300 , 0x04 },
{ 41700 , 0x13 },
{ 50000 , 0x0B },
{ 62500 , 0x03 },
{ 83333 , 0x12 },
{ 100000, 0x0A },
{ 125000, 0x02 },
{ 166700, 0x11 },
{ 200000, 0x09 },
{ 250000, 0x01 },
{ 300000, 0x00 }, // Invalid Badwidth
};
SX1276::SX1276( void ( *txDone )( ), void ( *txTimeout ) ( ), void ( *rxDone ) ( uint8_t *payload, uint16_t size, int16_t rssi, int8_t snr ),
void ( *rxTimeout ) ( ), void ( *rxError ) ( ), void ( *fhssChangeChannel ) ( uint8_t channelIndex ), void ( *cadDone ) ( bool channelActivityDetected ),
PinName mosi, PinName miso, PinName sclk, PinName nss, PinName reset,
PinName dio0, PinName dio1, PinName dio2, PinName dio3, PinName dio4, PinName dio5 )
: Radio( txDone, txTimeout, rxDone, rxTimeout, rxError, fhssChangeChannel, cadDone ),
spi( mosi, miso, sclk ),
nss( nss ),
reset( reset ),
dio0( dio0 ), dio1( dio1 ), dio2( dio2 ), dio3( dio3 ), dio4( dio4 ), dio5( dio5 ),
isRadioActive( false )
{
wait_ms( 10 );
this->rxTx = 0;
this->rxBuffer = new uint8_t[RX_BUFFER_SIZE];
previousOpMode = RF_OPMODE_STANDBY;
this->dioIrq = new DioIrqHandler[6];
this->dioIrq[0] = &SX1276::OnDio0Irq;
this->dioIrq[1] = &SX1276::OnDio1Irq;
this->dioIrq[2] = &SX1276::OnDio2Irq;
//For SHD3I with BOARD_INAIR4 in imod3, on FRDM-KL25Z board. It uses A4 on FRDM-KL25Z board, which does not have interrupt
#if( defined ( TARGET_KL25Z ) && defined(SHIELD_SHD3I_INAIR9) )
this->dioIrq[3] = NULL;
#else
this->dioIrq[3] = &SX1276::OnDio3Irq;
#endif
this->dioIrq[4] = &SX1276::OnDio4Irq;
this->dioIrq[5] = NULL;
this->settings.State = IDLE;
}
SX1276::~SX1276( )
{
delete this->rxBuffer;
delete this->dioIrq;
}
uint8_t SX1276::GetBoardType( void )
{
return boardConnected;
}
void SX1276::SetBoardType( uint8_t boardType)
{
boardConnected = boardType;
}
void SX1276::RxChainCalibration( void )
{
uint8_t regPaConfigInitVal;
uint32_t initialFreq;
// Save context
regPaConfigInitVal = this->Read( REG_PACONFIG );
initialFreq = ( double )( ( ( uint32_t )this->Read( REG_FRFMSB ) << 16 ) |
( ( uint32_t )this->Read( REG_FRFMID ) << 8 ) |
( ( uint32_t )this->Read( REG_FRFLSB ) ) ) * ( double )FREQ_STEP;
// Cut the PA just in case, RFO output, power = -1 dBm
this->Write( REG_PACONFIG, 0x00 );
// Launch Rx chain calibration for LF band
Write ( REG_IMAGECAL, ( Read( REG_IMAGECAL ) & RF_IMAGECAL_IMAGECAL_MASK ) | RF_IMAGECAL_IMAGECAL_START );
while( ( Read( REG_IMAGECAL ) & RF_IMAGECAL_IMAGECAL_RUNNING ) == RF_IMAGECAL_IMAGECAL_RUNNING )
{
}
// Sets a Frequency in HF band
settings.Channel= 868000000 ;
// Launch Rx chain calibration for HF band
Write ( REG_IMAGECAL, ( Read( REG_IMAGECAL ) & RF_IMAGECAL_IMAGECAL_MASK ) | RF_IMAGECAL_IMAGECAL_START );
while( ( Read( REG_IMAGECAL ) & RF_IMAGECAL_IMAGECAL_RUNNING ) == RF_IMAGECAL_IMAGECAL_RUNNING )
{
}
// Restore context
this->Write( REG_PACONFIG, regPaConfigInitVal );
SetChannel( initialFreq );
}
RadioState SX1276::GetState( void )
{
return this->settings.State;
}
void SX1276::SetChannel( uint32_t freq )
{
this->settings.Channel = freq;
freq = ( uint32_t )( ( double )freq / ( double )FREQ_STEP );
Write( REG_FRFMSB, ( uint8_t )( ( freq >> 16 ) & 0xFF ) );
Write( REG_FRFMID, ( uint8_t )( ( freq >> 8 ) & 0xFF ) );
Write( REG_FRFLSB, ( uint8_t )( freq & 0xFF ) );
}
bool SX1276::IsChannelFree( ModemType modem, uint32_t freq, int8_t rssiThresh )
{
int16_t rssi = 0;
SetModem( modem );
SetChannel( freq );
SetOpMode( RF_OPMODE_RECEIVER );
wait_ms( 1 );
rssi = GetRssi( modem );
Sleep( );
if( rssi > ( int16_t )rssiThresh )
{
return false;
}
return true;
}
uint32_t SX1276::Random( void )
{
uint8_t i;
uint32_t rnd = 0;
/*
* Radio setup for random number generation
*/
// Set LoRa modem ON
SetModem( MODEM_LORA );
// Disable LoRa modem interrupts
Write( REG_LR_IRQFLAGSMASK, RFLR_IRQFLAGS_RXTIMEOUT |
RFLR_IRQFLAGS_RXDONE |
RFLR_IRQFLAGS_PAYLOADCRCERROR |
RFLR_IRQFLAGS_VALIDHEADER |
RFLR_IRQFLAGS_TXDONE |
RFLR_IRQFLAGS_CADDONE |
RFLR_IRQFLAGS_FHSSCHANGEDCHANNEL |
RFLR_IRQFLAGS_CADDETECTED );
// Set radio in continuous reception
SetOpMode( RF_OPMODE_RECEIVER );
for( i = 0; i < 32; i++ )
{
wait_ms( 1 );
// Unfiltered RSSI value reading. Only takes the LSB value
rnd |= ( ( uint32_t )Read( REG_LR_RSSIWIDEBAND ) & 0x01 ) << i;
}
Sleep( );
return rnd;
}
/*!
* Returns the known FSK bandwidth registers value
*
* \param [IN] bandwidth Bandwidth value in Hz
* \retval regValue Bandwidth register value.
*/
uint8_t SX1276::GetFskBandwidthRegValue( uint32_t bandwidth )
{
uint8_t i;
for( i = 0; i < ( sizeof( FskBandwidths ) / sizeof( FskBandwidth_t ) ) - 1; i++ )
{
if( ( bandwidth >= FskBandwidths[i].bandwidth ) && ( bandwidth < FskBandwidths[i + 1].bandwidth ) )
{
return FskBandwidths[i].RegValue;
}
}
// ERROR: Value not found
while( 1 );
}
void SX1276::SetRxConfig( ModemType modem, uint32_t bandwidth,
uint32_t datarate, uint8_t coderate,
uint32_t bandwidthAfc, uint16_t preambleLen,
uint16_t symbTimeout, bool fixLen,
uint8_t payloadLen,
bool crcOn, bool freqHopOn, uint8_t hopPeriod,
bool iqInverted, bool rxContinuous )
{
SetModem( modem );
switch( modem )
{
case MODEM_FSK:
{
this->settings.Fsk.Bandwidth = bandwidth;
this->settings.Fsk.Datarate = datarate;
this->settings.Fsk.BandwidthAfc = bandwidthAfc;
this->settings.Fsk.FixLen = fixLen;
this->settings.Fsk.PayloadLen = payloadLen;
this->settings.Fsk.CrcOn = crcOn;
this->settings.Fsk.IqInverted = iqInverted;
this->settings.Fsk.RxContinuous = rxContinuous;
this->settings.Fsk.PreambleLen = preambleLen;
datarate = ( uint16_t )( ( double )XTAL_FREQ / ( double )datarate );
Write( REG_BITRATEMSB, ( uint8_t )( datarate >> 8 ) );
Write( REG_BITRATELSB, ( uint8_t )( datarate & 0xFF ) );
Write( REG_RXBW, GetFskBandwidthRegValue( bandwidth ) );
Write( REG_AFCBW, GetFskBandwidthRegValue( bandwidthAfc ) );
Write( REG_PREAMBLEMSB, ( uint8_t )( ( preambleLen >> 8 ) & 0xFF ) );
Write( REG_PREAMBLELSB, ( uint8_t )( preambleLen & 0xFF ) );
Write( REG_PACKETCONFIG1,
( Read( REG_PACKETCONFIG1 ) &
RF_PACKETCONFIG1_CRC_MASK &
RF_PACKETCONFIG1_PACKETFORMAT_MASK ) |
( ( fixLen == 1 ) ? RF_PACKETCONFIG1_PACKETFORMAT_FIXED : RF_PACKETCONFIG1_PACKETFORMAT_VARIABLE ) |
( crcOn << 4 ) );
if( fixLen == 1 )
{
Write( REG_PAYLOADLENGTH, payloadLen );
}
}
break;
case MODEM_LORA:
{
if( bandwidth > 9 )
{
// Fatal error: Bandwidth must be 0-9 (7.8 - 500khz)
while( 1 );
}
//bandwidth += 7; //Changed bandwidth from 0-2 to 0-10
this->settings.LoRa.Bandwidth = bandwidth;
this->settings.LoRa.Datarate = datarate;
this->settings.LoRa.Coderate = coderate;
this->settings.LoRa.FixLen = fixLen;
this->settings.LoRa.PayloadLen = payloadLen;
this->settings.LoRa.CrcOn = crcOn;
this->settings.LoRa.FreqHopOn = freqHopOn;
this->settings.LoRa.HopPeriod = hopPeriod;
this->settings.LoRa.IqInverted = iqInverted;
this->settings.LoRa.RxContinuous = rxContinuous;
if( datarate > 12 )
{
datarate = 12;
}
else if( datarate < 6 )
{
datarate = 6;
}
//bandwidth 6=62.5, 7=125, 8=250, 9=500, datarate=SF. LowDatarateOptimize is mandatory when symbol length > 16ms
//LowDatarateOptimize = 0 when (BW=500) or (BW=250 and SF=12), else it is ON (Tsym > 16ms)
if( ( ( bandwidth == 8 ) && ( datarate == 12 ) ) ||
( ( bandwidth == 7 ) && ( datarate > 10 ) ) ||
( ( bandwidth == 6 ) && ( datarate > 9 ) ) ||
( ( bandwidth == 5 ) && ( datarate > 9 ) ) ||
( ( bandwidth == 4 ) && ( datarate > 8 ) ) || ( bandwidth < 4 )
//The below is actually correct method, but assume BW = 20.8 and lower will always have SF > 8
// ( ( bandwidth == 3 ) && ( datarate > 8 ) ) ||
// ( ( bandwidth == 2 ) && ( datarate > 7 ) ) ||
// ( ( bandwidth == 1 ) && ( datarate > 7 ) ) ||
// ( ( bandwidth == 0 ) && ( datarate > 6 ) )
)
{
this->settings.LoRa.LowDatarateOptimize = 0x01;
}
else
{
this->settings.LoRa.LowDatarateOptimize = 0x00;
}
Write( REG_LR_MODEMCONFIG1,
( Read( REG_LR_MODEMCONFIG1 ) &
RFLR_MODEMCONFIG1_BW_MASK &
RFLR_MODEMCONFIG1_CODINGRATE_MASK &
RFLR_MODEMCONFIG1_IMPLICITHEADER_MASK ) |
( bandwidth << 4 ) | ( coderate << 1 ) |
fixLen );
Write( REG_LR_MODEMCONFIG2,
( Read( REG_LR_MODEMCONFIG2 ) &
RFLR_MODEMCONFIG2_SF_MASK &
RFLR_MODEMCONFIG2_RXPAYLOADCRC_MASK &
RFLR_MODEMCONFIG2_SYMBTIMEOUTMSB_MASK ) |
( datarate << 4 ) | ( crcOn << 2 ) |
( ( symbTimeout >> 8 ) & ~RFLR_MODEMCONFIG2_SYMBTIMEOUTMSB_MASK ) );
Write( REG_LR_MODEMCONFIG3,
( Read( REG_LR_MODEMCONFIG3 ) &
RFLR_MODEMCONFIG3_LOWDATARATEOPTIMIZE_MASK ) |
( this->settings.LoRa.LowDatarateOptimize << 3 ) );
Write( REG_LR_SYMBTIMEOUTLSB, ( uint8_t )( symbTimeout & 0xFF ) );
Write( REG_LR_PREAMBLEMSB, ( uint8_t )( ( preambleLen >> 8 ) & 0xFF ) );
Write( REG_LR_PREAMBLELSB, ( uint8_t )( preambleLen & 0xFF ) );
if( fixLen == 1 )
{
Write( REG_LR_PAYLOADLENGTH, payloadLen );
}
if( this->settings.LoRa.FreqHopOn == true )
{
Write( REG_LR_PLLHOP, ( Read( REG_LR_PLLHOP ) & RFLR_PLLHOP_FASTHOP_MASK ) | RFLR_PLLHOP_FASTHOP_ON );
Write( REG_LR_HOPPERIOD, this->settings.LoRa.HopPeriod );
}
if( datarate == 6 )
{
Write( REG_LR_DETECTOPTIMIZE,
( Read( REG_LR_DETECTOPTIMIZE ) &
RFLR_DETECTIONOPTIMIZE_MASK ) |
RFLR_DETECTIONOPTIMIZE_SF6 );
Write( REG_LR_DETECTIONTHRESHOLD,
RFLR_DETECTIONTHRESH_SF6 );
}
else
{
Write( REG_LR_DETECTOPTIMIZE,
( Read( REG_LR_DETECTOPTIMIZE ) &
RFLR_DETECTIONOPTIMIZE_MASK ) |
RFLR_DETECTIONOPTIMIZE_SF7_TO_SF12 );
Write( REG_LR_DETECTIONTHRESHOLD,
RFLR_DETECTIONTHRESH_SF7_TO_SF12 );
}
}
break;
}
}
void SX1276::SetTxConfig( ModemType modem, int8_t power, uint32_t fdev,
uint32_t bandwidth, uint32_t datarate,
uint8_t coderate, uint16_t preambleLen,
bool fixLen, bool crcOn, bool freqHopOn,
uint8_t hopPeriod, bool iqInverted, uint32_t timeout )
{
uint8_t paConfig = 0;
uint8_t paDac = 0;
SetModem( modem );
paConfig = Read( REG_PACONFIG );
paDac = Read( REG_PADAC );
paConfig = ( paConfig & RF_PACONFIG_PASELECT_MASK ) | GetPaSelect( this->settings.Channel );
paConfig = ( paConfig & RF_PACONFIG_MAX_POWER_MASK ) | 0x70;
if( ( paConfig & RF_PACONFIG_PASELECT_PABOOST ) == RF_PACONFIG_PASELECT_PABOOST )
{
if( power > 17 )
{
paDac = ( paDac & RF_PADAC_20DBM_MASK ) | RF_PADAC_20DBM_ON;
}
else
{
paDac = ( paDac & RF_PADAC_20DBM_MASK ) | RF_PADAC_20DBM_OFF;
}
if( ( paDac & RF_PADAC_20DBM_ON ) == RF_PADAC_20DBM_ON )
{
if( power < 5 )
{
power = 5;
}
if( power > 20 )
{
power = 20;
}
paConfig = ( paConfig & RF_PACONFIG_OUTPUTPOWER_MASK ) | ( uint8_t )( ( uint16_t )( power - 5 ) & 0x0F );
}
else
{
if( power < 2 )
{
power = 2;
}
if( power > 17 )
{
power = 17;
}
paConfig = ( paConfig & RF_PACONFIG_OUTPUTPOWER_MASK ) | ( uint8_t )( ( uint16_t )( power - 2 ) & 0x0F );
}
}
else
{
if( power < -1 )
{
power = -1;
}
if( power > 14 )
{
power = 14;
}
paConfig = ( paConfig & RF_PACONFIG_OUTPUTPOWER_MASK ) | ( uint8_t )( ( uint16_t )( power + 1 ) & 0x0F );
}
Write( REG_PACONFIG, paConfig );
Write( REG_PADAC, paDac );
switch( modem )
{
case MODEM_FSK:
{
this->settings.Fsk.Power = power;
this->settings.Fsk.Fdev = fdev;
this->settings.Fsk.Bandwidth = bandwidth;
this->settings.Fsk.Datarate = datarate;
this->settings.Fsk.PreambleLen = preambleLen;
this->settings.Fsk.FixLen = fixLen;
this->settings.Fsk.CrcOn = crcOn;
this->settings.Fsk.IqInverted = iqInverted;
this->settings.Fsk.TxTimeout = timeout;
fdev = ( uint16_t )( ( double )fdev / ( double )FREQ_STEP );
Write( REG_FDEVMSB, ( uint8_t )( fdev >> 8 ) );
Write( REG_FDEVLSB, ( uint8_t )( fdev & 0xFF ) );
datarate = ( uint16_t )( ( double )XTAL_FREQ / ( double )datarate );
Write( REG_BITRATEMSB, ( uint8_t )( datarate >> 8 ) );
Write( REG_BITRATELSB, ( uint8_t )( datarate & 0xFF ) );
Write( REG_PREAMBLEMSB, ( preambleLen >> 8 ) & 0x00FF );
Write( REG_PREAMBLELSB, preambleLen & 0xFF );
Write( REG_PACKETCONFIG1,
( Read( REG_PACKETCONFIG1 ) &
RF_PACKETCONFIG1_CRC_MASK &
RF_PACKETCONFIG1_PACKETFORMAT_MASK ) |
( ( fixLen == 1 ) ? RF_PACKETCONFIG1_PACKETFORMAT_FIXED : RF_PACKETCONFIG1_PACKETFORMAT_VARIABLE ) |
( crcOn << 4 ) );
}
break;
case MODEM_LORA:
{
this->settings.LoRa.Power = power;
if( bandwidth > 9 )
{
// Fatal error: Bandwidth must be 0-9 (7.8 - 500khz)
while( 1 );
}
//bandwidth += 7;
this->settings.LoRa.Bandwidth = bandwidth;
this->settings.LoRa.Datarate = datarate;
this->settings.LoRa.Coderate = coderate;
this->settings.LoRa.PreambleLen = preambleLen;
this->settings.LoRa.FixLen = fixLen;
this->settings.LoRa.CrcOn = crcOn;
this->settings.LoRa.FreqHopOn = freqHopOn;
this->settings.LoRa.HopPeriod = hopPeriod;
this->settings.LoRa.IqInverted = iqInverted;
this->settings.LoRa.TxTimeout = timeout;
if( datarate > 12 )
{
datarate = 12;
}
else if( datarate < 6 )
{
datarate = 6;
}
//bandwidth 6=62.5, 7=125, 8=250, 9=500, datarate=SF. LowDatarateOptimize is mandatory when symbol length > 16ms
//LowDatarateOptimize = 0 when (BW=500) or (BW=250 and SF=12), else it is ON (Tsym > 16ms)
if( ( ( bandwidth == 8 ) && ( datarate == 12 ) ) ||
( ( bandwidth == 7 ) && ( datarate > 10 ) ) ||
( ( bandwidth == 6 ) && ( datarate > 9 ) ) ||
( ( bandwidth == 5 ) && ( datarate > 9 ) ) ||
( ( bandwidth == 4 ) && ( datarate > 8 ) ) || ( bandwidth < 4 )
//The below is actually correct method, but assume BW = 20.8 and lower will always have SF > 8
// ( ( bandwidth == 3 ) && ( datarate > 8 ) ) ||
// ( ( bandwidth == 2 ) && ( datarate > 7 ) ) ||
// ( ( bandwidth == 1 ) && ( datarate > 7 ) ) ||
// ( ( bandwidth == 0 ) && ( datarate > 6 ) )
)
{
this->settings.LoRa.LowDatarateOptimize = 0x01;
}
else
{
this->settings.LoRa.LowDatarateOptimize = 0x00;
}
if( this->settings.LoRa.FreqHopOn == true )
{
Write( REG_LR_PLLHOP, ( Read( REG_LR_PLLHOP ) & RFLR_PLLHOP_FASTHOP_MASK ) | RFLR_PLLHOP_FASTHOP_ON );
Write( REG_LR_HOPPERIOD, this->settings.LoRa.HopPeriod );
}
Write( REG_LR_MODEMCONFIG1,
( Read( REG_LR_MODEMCONFIG1 ) &
RFLR_MODEMCONFIG1_BW_MASK &
RFLR_MODEMCONFIG1_CODINGRATE_MASK &
RFLR_MODEMCONFIG1_IMPLICITHEADER_MASK ) |
( bandwidth << 4 ) | ( coderate << 1 ) |
fixLen );
Write( REG_LR_MODEMCONFIG2,
( Read( REG_LR_MODEMCONFIG2 ) &
RFLR_MODEMCONFIG2_SF_MASK &
RFLR_MODEMCONFIG2_RXPAYLOADCRC_MASK ) |
( datarate << 4 ) | ( crcOn << 2 ) );
Write( REG_LR_MODEMCONFIG3,
( Read( REG_LR_MODEMCONFIG3 ) &
RFLR_MODEMCONFIG3_LOWDATARATEOPTIMIZE_MASK ) |
( this->settings.LoRa.LowDatarateOptimize << 3 ) );
Write( REG_LR_PREAMBLEMSB, ( preambleLen >> 8 ) & 0x00FF );
Write( REG_LR_PREAMBLELSB, preambleLen & 0xFF );
if( datarate == 6 )
{
Write( REG_LR_DETECTOPTIMIZE,
( Read( REG_LR_DETECTOPTIMIZE ) &
RFLR_DETECTIONOPTIMIZE_MASK ) |
RFLR_DETECTIONOPTIMIZE_SF6 );
Write( REG_LR_DETECTIONTHRESHOLD,
RFLR_DETECTIONTHRESH_SF6 );
}
else
{
Write( REG_LR_DETECTOPTIMIZE,
( Read( REG_LR_DETECTOPTIMIZE ) &
RFLR_DETECTIONOPTIMIZE_MASK ) |
RFLR_DETECTIONOPTIMIZE_SF7_TO_SF12 );
Write( REG_LR_DETECTIONTHRESHOLD,
RFLR_DETECTIONTHRESH_SF7_TO_SF12 );
}
}
break;
}
}
double SX1276::TimeOnAir( ModemType modem, uint8_t pktLen )
{
double airTime = 0.0;
switch( modem )
{
case MODEM_FSK:
{
airTime = ceil( ( 8 * ( this->settings.Fsk.PreambleLen +
( ( Read( REG_SYNCCONFIG ) & ~RF_SYNCCONFIG_SYNCSIZE_MASK ) + 1 ) +
( ( this->settings.Fsk.FixLen == 0x01 ) ? 0.0 : 1.0 ) +
( ( ( Read( REG_PACKETCONFIG1 ) & ~RF_PACKETCONFIG1_ADDRSFILTERING_MASK ) != 0x00 ) ? 1.0 : 0 ) +
pktLen +
( ( this->settings.Fsk.CrcOn == 0x01 ) ? 2.0 : 0 ) ) /
this->settings.Fsk.Datarate ) * 1e6 );
}
break;
case MODEM_LORA:
{
double bw = 0.0;
switch( this->settings.LoRa.Bandwidth )
{
case 0: // 7.8 kHz
bw = 78e2;
break;
case 1: // 10.4 kHz
bw = 104e2;
break;
case 2: // 15.6 kHz
bw = 156e2;
break;
case 3: // 20.8 kHz
bw = 208e2;
break;
case 4: // 31.2 kHz
bw = 312e2;
break;
case 5: // 41.4 kHz
bw = 414e2;
break;
case 6: // 62.5 kHz
bw = 625e2;
break;
case 7: // 125 kHz
bw = 125e3;
break;
case 8: // 250 kHz
bw = 250e3;
break;
case 9: // 500 kHz
bw = 500e3;
break;
}
// Symbol rate : time for one symbol (secs)
double rs = bw / ( 1 << this->settings.LoRa.Datarate );
double ts = 1 / rs;
// time of preamble
double tPreamble = ( this->settings.LoRa.PreambleLen + 4.25 ) * ts;
// Symbol length of payload and time
double tmp = ceil( ( 8 * pktLen - 4 * this->settings.LoRa.Datarate +
28 + 16 * this->settings.LoRa.CrcOn -
( this->settings.LoRa.FixLen ? 20 : 0 ) ) /
( double )( 4 * this->settings.LoRa.Datarate -
( ( this->settings.LoRa.LowDatarateOptimize > 0 ) ? 8 : 0 ) ) ) *
( this->settings.LoRa.Coderate + 4 );
double nPayload = 8 + ( ( tmp > 0 ) ? tmp : 0 );
double tPayload = nPayload * ts;
// Time on air
double tOnAir = tPreamble + tPayload;
// return us secs
airTime = floor( tOnAir * 1e6 + 0.999 );
}
break;
}
return airTime;
}
void SX1276::Send( uint8_t *buffer, uint8_t size )
{
uint32_t txTimeout = 0;
this->settings.State = IDLE;
switch( this->settings.Modem )
{
case MODEM_FSK:
{
this->settings.FskPacketHandler.NbBytes = 0;
this->settings.FskPacketHandler.Size = size;
if( this->settings.Fsk.FixLen == false )
{
WriteFifo( ( uint8_t* )&size, 1 );
}
else
{
Write( REG_PAYLOADLENGTH, size );
}
if( ( size > 0 ) && ( size <= 64 ) )
{
this->settings.FskPacketHandler.ChunkSize = size;
}
else
{
this->settings.FskPacketHandler.ChunkSize = 32;
}
// Write payload buffer
WriteFifo( buffer, this->settings.FskPacketHandler.ChunkSize );
this->settings.FskPacketHandler.NbBytes += this->settings.FskPacketHandler.ChunkSize;
txTimeout = this->settings.Fsk.TxTimeout;
}
break;
case MODEM_LORA:
{
if( this->settings.LoRa.IqInverted == true )
{
Write( REG_LR_INVERTIQ, ( ( Read( REG_LR_INVERTIQ ) & RFLR_INVERTIQ_TX_MASK & RFLR_INVERTIQ_RX_MASK ) | RFLR_INVERTIQ_RX_OFF | RFLR_INVERTIQ_TX_ON ) );
}
else
{
Write( REG_LR_INVERTIQ, ( ( Read( REG_LR_INVERTIQ ) & RFLR_INVERTIQ_TX_MASK & RFLR_INVERTIQ_RX_MASK ) | RFLR_INVERTIQ_RX_OFF | RFLR_INVERTIQ_TX_OFF ) );
}
this->settings.LoRaPacketHandler.Size = size;
// Initializes the payload size
Write( REG_LR_PAYLOADLENGTH, size );
// Full buffer used for Tx
Write( REG_LR_FIFOTXBASEADDR, 0 );
Write( REG_LR_FIFOADDRPTR, 0 );
// FIFO operations can not take place in Sleep mode
if( ( Read( REG_OPMODE ) & ~RF_OPMODE_MASK ) == RF_OPMODE_SLEEP )
{
Standby( );
wait_ms( 1 );
}
// Write payload buffer
WriteFifo( buffer, size );
txTimeout = this->settings.LoRa.TxTimeout;
}
break;
}
Tx( txTimeout );
}
void SX1276::Sleep( void )
{
// Initialize driver timeout timers
txTimeoutTimer.detach( );
rxTimeoutTimer.detach( );
SetOpMode( RF_OPMODE_SLEEP );
}
void SX1276::Standby( void )
{
txTimeoutTimer.detach( );
rxTimeoutTimer.detach( );
SetOpMode( RF_OPMODE_STANDBY );
}
void SX1276::Rx( uint32_t timeout )
{
bool rxContinuous = false;
switch( this->settings.Modem )
{
case MODEM_FSK:
{
rxContinuous = this->settings.Fsk.RxContinuous;
// DIO0=PayloadReady
// DIO1=FifoLevel
// DIO2=SyncAddr
// DIO3=FifoEmpty
// DIO4=Preamble
// DIO5=ModeReady
Write( REG_DIOMAPPING1, ( Read( REG_DIOMAPPING1 ) & RF_DIOMAPPING1_DIO0_MASK & RF_DIOMAPPING1_DIO1_MASK &
RF_DIOMAPPING1_DIO2_MASK ) |
RF_DIOMAPPING1_DIO0_00 |
RF_DIOMAPPING1_DIO2_11 );
Write( REG_DIOMAPPING2, ( Read( REG_DIOMAPPING2 ) & RF_DIOMAPPING2_DIO4_MASK &
RF_DIOMAPPING2_MAP_MASK ) |
RF_DIOMAPPING2_DIO4_11 |
RF_DIOMAPPING2_MAP_PREAMBLEDETECT );
this->settings.FskPacketHandler.FifoThresh = Read( REG_FIFOTHRESH ) & 0x3F;
this->settings.FskPacketHandler.PreambleDetected = false;
this->settings.FskPacketHandler.SyncWordDetected = false;
this->settings.FskPacketHandler.NbBytes = 0;
this->settings.FskPacketHandler.Size = 0;
}
break;
case MODEM_LORA:
{
if( this->settings.LoRa.IqInverted == true )
{
Write( REG_LR_INVERTIQ, ( ( Read( REG_LR_INVERTIQ ) & RFLR_INVERTIQ_TX_MASK & RFLR_INVERTIQ_RX_MASK ) | RFLR_INVERTIQ_RX_ON | RFLR_INVERTIQ_TX_OFF ) );
}
else
{
Write( REG_LR_INVERTIQ, ( ( Read( REG_LR_INVERTIQ ) & RFLR_INVERTIQ_TX_MASK & RFLR_INVERTIQ_RX_MASK ) | RFLR_INVERTIQ_RX_OFF | RFLR_INVERTIQ_TX_OFF ) );
}
rxContinuous = this->settings.LoRa.RxContinuous;
if( this->settings.LoRa.FreqHopOn == true )
{
Write( REG_LR_IRQFLAGSMASK, //RFLR_IRQFLAGS_RXTIMEOUT |
//RFLR_IRQFLAGS_RXDONE |
//RFLR_IRQFLAGS_PAYLOADCRCERROR |
RFLR_IRQFLAGS_VALIDHEADER |
RFLR_IRQFLAGS_TXDONE |
RFLR_IRQFLAGS_CADDONE |
//RFLR_IRQFLAGS_FHSSCHANGEDCHANNEL |
RFLR_IRQFLAGS_CADDETECTED );
// DIO0=RxDone, DIO2=FhssChangeChannel
Write( REG_DIOMAPPING1, ( Read( REG_DIOMAPPING1 ) & RFLR_DIOMAPPING1_DIO0_MASK & RFLR_DIOMAPPING1_DIO2_MASK ) | RFLR_DIOMAPPING1_DIO0_00 | RFLR_DIOMAPPING1_DIO2_00 );
}
else
{
Write( REG_LR_IRQFLAGSMASK, //RFLR_IRQFLAGS_RXTIMEOUT |
//RFLR_IRQFLAGS_RXDONE |
//RFLR_IRQFLAGS_PAYLOADCRCERROR |
RFLR_IRQFLAGS_VALIDHEADER |
RFLR_IRQFLAGS_TXDONE |
RFLR_IRQFLAGS_CADDONE |
RFLR_IRQFLAGS_FHSSCHANGEDCHANNEL |
RFLR_IRQFLAGS_CADDETECTED );
// DIO0=RxDone
Write( REG_DIOMAPPING1, ( Read( REG_DIOMAPPING1 ) & RFLR_DIOMAPPING1_DIO0_MASK ) | RFLR_DIOMAPPING1_DIO0_00 );
}
Write( REG_LR_FIFORXBASEADDR, 0 );
Write( REG_LR_FIFOADDRPTR, 0 );
}
break;
}
memset( rxBuffer, 0, ( size_t )RX_BUFFER_SIZE );
this->settings.State = RX;
if( timeout != 0 )
{
rxTimeoutTimer.attach_us( this, &SX1276::OnTimeoutIrq, timeout );
}
if( this->settings.Modem == MODEM_FSK )
{
SetOpMode( RF_OPMODE_RECEIVER );
if( rxContinuous == false )
{
rxTimeoutSyncWord.attach_us( this, &SX1276::OnTimeoutIrq, ( 8.0 * ( this->settings.Fsk.PreambleLen +
( ( Read( REG_SYNCCONFIG ) &
~RF_SYNCCONFIG_SYNCSIZE_MASK ) +
1.0 ) + 1.0 ) /
( double )this->settings.Fsk.Datarate ) * 1e6 ) ;
}
}
else
{
if( rxContinuous == true )
{
SetOpMode( RFLR_OPMODE_RECEIVER );
}
else
{
SetOpMode( RFLR_OPMODE_RECEIVER_SINGLE );
}
}
}
void SX1276::Tx( uint32_t timeout )
{
switch( this->settings.Modem )
{
case MODEM_FSK:
{
// DIO0=PacketSent
// DIO1=FifoLevel
// DIO2=FifoFull
// DIO3=FifoEmpty
// DIO4=LowBat
// DIO5=ModeReady
Write( REG_DIOMAPPING1, ( Read( REG_DIOMAPPING1 ) & RF_DIOMAPPING1_DIO0_MASK & RF_DIOMAPPING1_DIO1_MASK &
RF_DIOMAPPING1_DIO2_MASK ) );
Write( REG_DIOMAPPING2, ( Read( REG_DIOMAPPING2 ) & RF_DIOMAPPING2_DIO4_MASK &
RF_DIOMAPPING2_MAP_MASK ) );
this->settings.FskPacketHandler.FifoThresh = Read( REG_FIFOTHRESH ) & 0x3F;
}
break;
case MODEM_LORA:
{
if( this->settings.LoRa.FreqHopOn == true )
{
Write( REG_LR_IRQFLAGSMASK, RFLR_IRQFLAGS_RXTIMEOUT |
RFLR_IRQFLAGS_RXDONE |
RFLR_IRQFLAGS_PAYLOADCRCERROR |
RFLR_IRQFLAGS_VALIDHEADER |
//RFLR_IRQFLAGS_TXDONE |
RFLR_IRQFLAGS_CADDONE |
//RFLR_IRQFLAGS_FHSSCHANGEDCHANNEL |
RFLR_IRQFLAGS_CADDETECTED );
// DIO0=TxDone
Write( REG_DIOMAPPING1, ( Read( REG_DIOMAPPING1 ) & RFLR_DIOMAPPING1_DIO0_MASK ) | RFLR_DIOMAPPING1_DIO0_01 );
// DIO2=FhssChangeChannel
Write( REG_DIOMAPPING1, ( Read( REG_DIOMAPPING1 ) & RFLR_DIOMAPPING1_DIO2_MASK ) | RFLR_DIOMAPPING1_DIO2_00 );
}
else
{
Write( REG_LR_IRQFLAGSMASK, RFLR_IRQFLAGS_RXTIMEOUT |
RFLR_IRQFLAGS_RXDONE |
RFLR_IRQFLAGS_PAYLOADCRCERROR |
RFLR_IRQFLAGS_VALIDHEADER |
//RFLR_IRQFLAGS_TXDONE |
RFLR_IRQFLAGS_CADDONE |
RFLR_IRQFLAGS_FHSSCHANGEDCHANNEL |
RFLR_IRQFLAGS_CADDETECTED );
// DIO0=TxDone
Write( REG_DIOMAPPING1, ( Read( REG_DIOMAPPING1 ) & RFLR_DIOMAPPING1_DIO0_MASK ) | RFLR_DIOMAPPING1_DIO0_01 );
}
}
break;
}
this->settings.State = TX;
txTimeoutTimer.attach_us( this, &SX1276::OnTimeoutIrq, timeout );
SetOpMode( RF_OPMODE_TRANSMITTER );
}
void SX1276::StartCad( void )
{
switch( this->settings.Modem )
{
case MODEM_FSK:
{
}
break;
case MODEM_LORA:
{
Write( REG_LR_IRQFLAGSMASK, RFLR_IRQFLAGS_RXTIMEOUT |
RFLR_IRQFLAGS_RXDONE |
RFLR_IRQFLAGS_PAYLOADCRCERROR |
RFLR_IRQFLAGS_VALIDHEADER |
RFLR_IRQFLAGS_TXDONE |
//RFLR_IRQFLAGS_CADDONE |
RFLR_IRQFLAGS_FHSSCHANGEDCHANNEL // |
//RFLR_IRQFLAGS_CADDETECTED
);
// DIO3=CADDone
Write( REG_DIOMAPPING1, ( Read( REG_DIOMAPPING1 ) & RFLR_DIOMAPPING1_DIO0_MASK ) | RFLR_DIOMAPPING1_DIO0_00 );
this->settings.State = CAD;
SetOpMode( RFLR_OPMODE_CAD );
}
break;
default:
break;
}
}
int16_t SX1276::GetRssi( ModemType modem )
{
int16_t rssi = 0;
switch( modem )
{
case MODEM_FSK:
rssi = -( Read( REG_RSSIVALUE ) >> 1 );
break;
case MODEM_LORA:
if( this->settings.Channel > RF_MID_BAND_THRESH )
{
rssi = RSSI_OFFSET_HF + Read( REG_LR_RSSIVALUE );
}
else
{
rssi = RSSI_OFFSET_LF + Read( REG_LR_RSSIVALUE );
}
break;
default:
rssi = -1;
break;
}
return rssi;
}
void SX1276::SetOpMode( uint8_t opMode )
{
if( opMode != previousOpMode )
{
previousOpMode = opMode;
if( opMode == RF_OPMODE_SLEEP )
{
SetAntSwLowPower( true );
}
else
{
SetAntSwLowPower( false );
if( opMode == RF_OPMODE_TRANSMITTER )
{
SetAntSw( 1 );
}
else
{
SetAntSw( 0 );
}
}
Write( REG_OPMODE, ( Read( REG_OPMODE ) & RF_OPMODE_MASK ) | opMode );
}
}
void SX1276::SetModem( ModemType modem )
{
if( this->settings.Modem != modem )
{
this->settings.Modem = modem;
switch( this->settings.Modem )
{
default:
case MODEM_FSK:
SetOpMode( RF_OPMODE_SLEEP );
Write( REG_OPMODE, ( Read( REG_OPMODE ) & RFLR_OPMODE_LONGRANGEMODE_MASK ) | RFLR_OPMODE_LONGRANGEMODE_OFF );
Write( REG_DIOMAPPING1, 0x00 );
Write( REG_DIOMAPPING2, 0x30 ); // DIO5=ModeReady
break;
case MODEM_LORA:
SetOpMode( RF_OPMODE_SLEEP );
Write( REG_OPMODE, ( Read( REG_OPMODE ) & RFLR_OPMODE_LONGRANGEMODE_MASK ) | RFLR_OPMODE_LONGRANGEMODE_ON );
Write( 0x30, 0x00 ); // IF = 0
Write( REG_LR_DETECTOPTIMIZE, ( Read( REG_LR_DETECTOPTIMIZE ) & 0x7F ) ); // Manual IF
Write( REG_DIOMAPPING1, 0x00 );
Write( REG_DIOMAPPING2, 0x00 );
break;
}
}
}
void SX1276::OnTimeoutIrq( void )
{
switch( this->settings.State )
{
case RX:
if( this->settings.Modem == MODEM_FSK )
{
this->settings.FskPacketHandler.PreambleDetected = false;
this->settings.FskPacketHandler.SyncWordDetected = false;
this->settings.FskPacketHandler.NbBytes = 0;
this->settings.FskPacketHandler.Size = 0;
// Clear Irqs
Write( REG_IRQFLAGS1, RF_IRQFLAGS1_RSSI |
RF_IRQFLAGS1_PREAMBLEDETECT |
RF_IRQFLAGS1_SYNCADDRESSMATCH );
Write( REG_IRQFLAGS2, RF_IRQFLAGS2_FIFOOVERRUN );
if( this->settings.Fsk.RxContinuous == true )
{
// Continuous mode restart Rx chain
Write( REG_RXCONFIG, Read( REG_RXCONFIG ) | RF_RXCONFIG_RESTARTRXWITHOUTPLLLOCK );
}
else
{
this->settings.State = IDLE;
rxTimeoutSyncWord.detach( );
}
}
if( ( rxTimeout != NULL ) )
{
rxTimeout( );
}
break;
case TX:
this->settings.State = IDLE;
if( ( txTimeout != NULL ) )
{
txTimeout( );
}
break;
default:
break;
}
}
void SX1276::OnDio0Irq( void )
{
__IO uint8_t irqFlags = 0;
switch( this->settings.State )
{
case RX:
//TimerStop( &RxTimeoutTimer );
// RxDone interrupt
switch( this->settings.Modem )
{
case MODEM_FSK:
irqFlags = Read( REG_IRQFLAGS2 );
if( ( irqFlags & RF_IRQFLAGS2_CRCOK ) != RF_IRQFLAGS2_CRCOK )
{
// Clear Irqs
Write( REG_IRQFLAGS1, RF_IRQFLAGS1_RSSI |
RF_IRQFLAGS1_PREAMBLEDETECT |
RF_IRQFLAGS1_SYNCADDRESSMATCH );
Write( REG_IRQFLAGS2, RF_IRQFLAGS2_FIFOOVERRUN );
if( this->settings.Fsk.RxContinuous == false )
{
this->settings.State = IDLE;
rxTimeoutSyncWord.attach_us( this, &SX1276::OnTimeoutIrq, ( 8.0 * ( this->settings.Fsk.PreambleLen +
( ( Read( REG_SYNCCONFIG ) &
~RF_SYNCCONFIG_SYNCSIZE_MASK ) +
1.0 ) + 1.0 ) /
( double )this->settings.Fsk.Datarate ) * 1e6 ) ;
}
else
{
// Continuous mode restart Rx chain
Write( REG_RXCONFIG, Read( REG_RXCONFIG ) | RF_RXCONFIG_RESTARTRXWITHOUTPLLLOCK );
}
rxTimeoutTimer.detach( );
if( ( rxError != NULL ) )
{
rxError( );
}
this->settings.FskPacketHandler.PreambleDetected = false;
this->settings.FskPacketHandler.SyncWordDetected = false;
this->settings.FskPacketHandler.NbBytes = 0;
this->settings.FskPacketHandler.Size = 0;
break;
}
// Read received packet size
if( ( this->settings.FskPacketHandler.Size == 0 ) && ( this->settings.FskPacketHandler.NbBytes == 0 ) )
{
if( this->settings.Fsk.FixLen == false )
{
ReadFifo( ( uint8_t* )&this->settings.FskPacketHandler.Size, 1 );
}
else
{
this->settings.FskPacketHandler.Size = Read( REG_PAYLOADLENGTH );
}
ReadFifo( rxBuffer + this->settings.FskPacketHandler.NbBytes, this->settings.FskPacketHandler.Size - this->settings.FskPacketHandler.NbBytes );
this->settings.FskPacketHandler.NbBytes += ( this->settings.FskPacketHandler.Size - this->settings.FskPacketHandler.NbBytes );
}
else
{
ReadFifo( rxBuffer + this->settings.FskPacketHandler.NbBytes, this->settings.FskPacketHandler.Size - this->settings.FskPacketHandler.NbBytes );
this->settings.FskPacketHandler.NbBytes += ( this->settings.FskPacketHandler.Size - this->settings.FskPacketHandler.NbBytes );
}
if( this->settings.Fsk.RxContinuous == false )
{
this->settings.State = IDLE;
rxTimeoutSyncWord.attach_us( this, &SX1276::OnTimeoutIrq, ( 8.0 * ( this->settings.Fsk.PreambleLen +
( ( Read( REG_SYNCCONFIG ) &
~RF_SYNCCONFIG_SYNCSIZE_MASK ) +
1.0 ) + 1.0 ) /
( double )this->settings.Fsk.Datarate ) * 1e6 ) ;
}
else
{
// Continuous mode restart Rx chain
Write( REG_RXCONFIG, Read( REG_RXCONFIG ) | RF_RXCONFIG_RESTARTRXWITHOUTPLLLOCK );
}
rxTimeoutTimer.detach( );
if( (rxDone != NULL ) )
{
rxDone( rxBuffer, this->settings.FskPacketHandler.Size, this->settings.FskPacketHandler.RssiValue, 0 );
}
this->settings.FskPacketHandler.PreambleDetected = false;
this->settings.FskPacketHandler.SyncWordDetected = false;
this->settings.FskPacketHandler.NbBytes = 0;
this->settings.FskPacketHandler.Size = 0;
break;
case MODEM_LORA:
{
uint8_t snr = 0;
// Clear Irq
Write( REG_LR_IRQFLAGS, RFLR_IRQFLAGS_RXDONE );
irqFlags = Read( REG_LR_IRQFLAGS );
if( ( irqFlags & RFLR_IRQFLAGS_PAYLOADCRCERROR_MASK ) == RFLR_IRQFLAGS_PAYLOADCRCERROR )
{
// Clear Irq
Write( REG_LR_IRQFLAGS, RFLR_IRQFLAGS_PAYLOADCRCERROR );
if( this->settings.LoRa.RxContinuous == false )
{
this->settings.State = IDLE;
}
rxTimeoutTimer.detach( );
if( ( rxError != NULL ) )
{
rxError( );
}
break;
}
this->settings.LoRaPacketHandler.SnrValue = Read( REG_LR_PKTSNRVALUE );
if( this->settings.LoRaPacketHandler.SnrValue & 0x80 ) // The SNR sign bit is 1
{
// Invert and divide by 4
snr = ( ( ~this->settings.LoRaPacketHandler.SnrValue + 1 ) & 0xFF ) >> 2;
snr = -snr;
}
else
{
// Divide by 4
snr = ( this->settings.LoRaPacketHandler.SnrValue & 0xFF ) >> 2;
}
int16_t rssi = Read( REG_LR_PKTRSSIVALUE );
if( this->settings.LoRaPacketHandler.SnrValue < 0 )
{
if( this->settings.Channel > RF_MID_BAND_THRESH )
{
this->settings.LoRaPacketHandler.RssiValue = RSSI_OFFSET_HF + rssi + ( rssi >> 4 ) +
snr;
}
else
{
this->settings.LoRaPacketHandler.RssiValue = RSSI_OFFSET_LF + rssi + ( rssi >> 4 ) +
snr;
}
}
else
{
if( this->settings.Channel > RF_MID_BAND_THRESH )
{
this->settings.LoRaPacketHandler.RssiValue = RSSI_OFFSET_HF + rssi + ( rssi >> 4 );
}
else
{
this->settings.LoRaPacketHandler.RssiValue = RSSI_OFFSET_LF + rssi + ( rssi >> 4 );
}
}
this->settings.LoRaPacketHandler.Size = Read( REG_LR_RXNBBYTES );
ReadFifo( rxBuffer, this->settings.LoRaPacketHandler.Size );
if( this->settings.LoRa.RxContinuous == false )
{
this->settings.State = IDLE;
}
rxTimeoutTimer.detach( );
if( ( rxDone != NULL ) )
{
rxDone( rxBuffer, this->settings.LoRaPacketHandler.Size, this->settings.LoRaPacketHandler.RssiValue, this->settings.LoRaPacketHandler.SnrValue );
}
}
break;
default:
break;
}
break;
case TX:
txTimeoutTimer.detach( );
// TxDone interrupt
switch( this->settings.Modem )
{
case MODEM_LORA:
// Clear Irq
Write( REG_LR_IRQFLAGS, RFLR_IRQFLAGS_TXDONE );
// Intentional fall through
case MODEM_FSK:
default:
this->settings.State = IDLE;
if( ( txDone != NULL ) )
{
txDone( );
}
break;
}
break;
default:
break;
}
}
void SX1276::OnDio1Irq( void )
{
switch( this->settings.State )
{
case RX:
switch( this->settings.Modem )
{
case MODEM_FSK:
// FifoLevel interrupt
// Read received packet size
if( ( this->settings.FskPacketHandler.Size == 0 ) && ( this->settings.FskPacketHandler.NbBytes == 0 ) )
{
if( this->settings.Fsk.FixLen == false )
{
ReadFifo( ( uint8_t* )&this->settings.FskPacketHandler.Size, 1 );
}
else
{
this->settings.FskPacketHandler.Size = Read( REG_PAYLOADLENGTH );
}
}
if( ( this->settings.FskPacketHandler.Size - this->settings.FskPacketHandler.NbBytes ) > this->settings.FskPacketHandler.FifoThresh )
{
ReadFifo( ( rxBuffer + this->settings.FskPacketHandler.NbBytes ), this->settings.FskPacketHandler.FifoThresh );
this->settings.FskPacketHandler.NbBytes += this->settings.FskPacketHandler.FifoThresh;
}
else
{
ReadFifo( ( rxBuffer + this->settings.FskPacketHandler.NbBytes ), this->settings.FskPacketHandler.Size - this->settings.FskPacketHandler.NbBytes );
this->settings.FskPacketHandler.NbBytes += ( this->settings.FskPacketHandler.Size - this->settings.FskPacketHandler.NbBytes );
}
break;
case MODEM_LORA:
// Sync time out
rxTimeoutTimer.detach( );
this->settings.State = IDLE;
if( ( rxTimeout != NULL ) )
{
rxTimeout( );
}
break;
default:
break;
}
break;
case TX:
switch( this->settings.Modem )
{
case MODEM_FSK:
// FifoLevel interrupt
if( ( this->settings.FskPacketHandler.Size - this->settings.FskPacketHandler.NbBytes ) > this->settings.FskPacketHandler.ChunkSize )
{
WriteFifo( ( rxBuffer + this->settings.FskPacketHandler.NbBytes ), this->settings.FskPacketHandler.ChunkSize );
this->settings.FskPacketHandler.NbBytes += this->settings.FskPacketHandler.ChunkSize;
}
else
{
// Write the last chunk of data
WriteFifo( rxBuffer + this->settings.FskPacketHandler.NbBytes, this->settings.FskPacketHandler.Size - this->settings.FskPacketHandler.NbBytes );
this->settings.FskPacketHandler.NbBytes += this->settings.FskPacketHandler.Size - this->settings.FskPacketHandler.NbBytes;
}
break;
case MODEM_LORA:
break;
default:
break;
}
break;
default:
break;
}
}
void SX1276::OnDio2Irq( void )
{
switch( this->settings.State )
{
case RX:
switch( this->settings.Modem )
{
case MODEM_FSK:
if( ( this->settings.FskPacketHandler.PreambleDetected == true ) && ( this->settings.FskPacketHandler.SyncWordDetected == false ) )
{
rxTimeoutSyncWord.detach( );
this->settings.FskPacketHandler.SyncWordDetected = true;
this->settings.FskPacketHandler.RssiValue = -( Read( REG_RSSIVALUE ) >> 1 );
this->settings.FskPacketHandler.AfcValue = ( int32_t )( double )( ( ( uint16_t )Read( REG_AFCMSB ) << 8 ) |
( uint16_t )Read( REG_AFCLSB ) ) *
( double )FREQ_STEP;
this->settings.FskPacketHandler.RxGain = ( Read( REG_LNA ) >> 5 ) & 0x07;
}
break;
case MODEM_LORA:
if( this->settings.LoRa.FreqHopOn == true )
{
// Clear Irq
Write( REG_LR_IRQFLAGS, RFLR_IRQFLAGS_FHSSCHANGEDCHANNEL );
if( ( fhssChangeChannel != NULL ) )
{
fhssChangeChannel( ( Read( REG_LR_HOPCHANNEL ) & RFLR_HOPCHANNEL_CHANNEL_MASK ) );
}
}
break;
default:
break;
}
break;
case TX:
switch( this->settings.Modem )
{
case MODEM_FSK:
break;
case MODEM_LORA:
if( this->settings.LoRa.FreqHopOn == true )
{
// Clear Irq
Write( REG_LR_IRQFLAGS, RFLR_IRQFLAGS_FHSSCHANGEDCHANNEL );
if( ( fhssChangeChannel != NULL ) )
{
fhssChangeChannel( ( Read( REG_LR_HOPCHANNEL ) & RFLR_HOPCHANNEL_CHANNEL_MASK ) );
}
}
break;
default:
break;
}
break;
default:
break;
}
}
void SX1276::OnDio3Irq( void )
{
switch( this->settings.Modem )
{
case MODEM_FSK:
break;
case MODEM_LORA:
if( ( Read( REG_LR_IRQFLAGS ) & 0x01 ) == 0x01 )
{
// Clear Irq
Write( REG_LR_IRQFLAGS, RFLR_IRQFLAGS_CADDETECTED_MASK | RFLR_IRQFLAGS_CADDONE);
if( ( cadDone != NULL ) )
{
cadDone( true );
}
}
else
{
// Clear Irq
Write( REG_LR_IRQFLAGS, RFLR_IRQFLAGS_CADDONE );
if( ( cadDone != NULL ) )
{
cadDone( false );
}
}
break;
default:
break;
}
}
void SX1276::OnDio4Irq( void )
{
switch( this->settings.Modem )
{
case MODEM_FSK:
{
if( this->settings.FskPacketHandler.PreambleDetected == false )
{
this->settings.FskPacketHandler.PreambleDetected = true;
}
}
break;
case MODEM_LORA:
break;
default:
break;
}
}
void SX1276::OnDio5Irq( void )
{
switch( this->settings.Modem )
{
case MODEM_FSK:
break;
case MODEM_LORA:
break;
default:
break;
}
}