Diff: sx1272/sx1272-hal.cpp

Revision:

0:45c4f0364ca4

Child:

1:b0372ef620d0

diff -r 000000000000 -r 45c4f0364ca4 sx1272/sx1272-hal.cpp
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/sx1272/sx1272-hal.cpp	Tue Jan 05 16:43:48 2016 +0000
@@ -0,0 +1,336 @@
+/*
+ / _____)             _              | |
+( (____  _____ ____ _| |_ _____  ____| |__
+ \____ \| ___ |    (_   _) ___ |/ ___)  _ \
+ _____) ) ____| | | || |_| ____( (___| | | |
+(______/|_____)_|_|_| \__)_____)\____)_| |_|
+    (C) 2015 Semtech
+
+Description: -
+
+License: Revised BSD License, see LICENSE.TXT file include in the project
+
+Maintainers: Miguel Luis, Gregory Cristian and Nicolas Huguenin
+*/
+#include "sx1272-hal.h"
+
+const RadioRegisters_t SX1272MB1DxS::RadioRegsInit[] = RADIO_INIT_REGISTERS_VALUE;
+
+SX1272MB1DxS::SX1272MB1DxS( RadioEvents_t *events,
+                            PinName mosi, PinName miso, PinName sclk, PinName nss, PinName reset,
+                            PinName dio0, PinName dio1, PinName dio2, PinName dio3, PinName dio4, PinName dio5,
+#if defined ( TARGET_MOTE_L152RC )
+                            PinName rfSwitchCntr1, PinName rfSwitchCntr2 )
+#else
+                            PinName antSwitch )
+#endif
+                            : SX1272( events, mosi, miso, sclk, nss, reset, dio0, dio1, dio2, dio3, dio4, dio5 ),
+#if defined ( TARGET_MOTE_L152RC )
+                            RfSwitchCntr1( rfSwitchCntr1 ),
+                            RfSwitchCntr2( rfSwitchCntr2 ),
+                            PwrAmpCntr( PD_2 )
+#else
+                            AntSwitch( antSwitch ),
+                        #if( defined ( TARGET_NUCLEO_L152RE ) )
+                            Fake( D8 ) 
+                        #else
+                            Fake( A3 )
+                        #endif
+#endif
+{
+    this->RadioEvents = events;
+
+    Reset( );
+    
+    IoInit( );
+    
+    SetOpMode( RF_OPMODE_SLEEP );
+    
+    IoIrqInit( dioIrq );
+    
+    RadioRegistersInit( );
+
+    SetModem( MODEM_FSK );
+
+    this->settings.State = RF_IDLE ;
+}
+
+SX1272MB1DxS::SX1272MB1DxS( RadioEvents_t *events ) 
+                        #if defined ( TARGET_NUCLEO_L152RE )
+                        :   SX1272( events, D11, D12, D13, D10, A0, D2, D3, D4, D5, A3, D9 ), // For NUCLEO L152RE dio4 is on port A3
+                            AntSwitch( A4 ),
+                            Fake( D8 )
+                        #elif defined ( TARGET_MOTE_L152RC )
+                        :   SX1272( events, PB_15, PB_14, PB_13, PB_12, PC_2, PC_6, PC_10, PC_11, PC_8, PC_9, PC_12 ),
+                            RfSwitchCntr1( PC_4 ),
+                            RfSwitchCntr2( PC_13 ),
+                            PwrAmpCntr( PD_2 )
+                        #else
+                        :   SX1272( events, D11, D12, D13, D10, A0, D2, D3, D4, D5, D8, D9 ),
+                            AntSwitch( A4 ), 
+                            Fake( A3 )
+                        #endif
+{
+    this->RadioEvents = events;
+
+    Reset( );
+    
+    boardConnected = UNKNOWN;
+    
+    DetectBoardType( );
+    
+    IoInit( );
+    
+    SetOpMode( RF_OPMODE_SLEEP );
+    IoIrqInit( dioIrq );
+    
+    RadioRegistersInit( );
+
+    SetModem( MODEM_FSK );
+
+    this->settings.State = RF_IDLE ;
+}
+
+//-------------------------------------------------------------------------
+//                      Board relative functions
+//-------------------------------------------------------------------------
+uint8_t SX1272MB1DxS::DetectBoardType( void )
+{
+    if( boardConnected == UNKNOWN )
+    {
+#if defined ( TARGET_MOTE_L152RC )
+        boardConnected = NA_MOTE_72;
+#else
+        this->AntSwitch.input( );
+        wait_ms( 1 );
+        if( this->AntSwitch == 1 )
+        {
+            boardConnected = SX1272MB1DCS;
+        }
+        else
+        {
+            boardConnected = SX1272MB1DAS;
+        }
+        this->AntSwitch.output( );
+        wait_ms( 1 );
+#endif
+    }
+    return ( boardConnected );
+}
+
+void SX1272MB1DxS::IoInit( void )
+{
+    AntSwInit( );
+    SpiInit( );
+}
+
+void SX1272MB1DxS::RadioRegistersInit( )
+{
+    uint8_t i = 0;
+    for( i = 0; i < sizeof( RadioRegsInit ) / sizeof( RadioRegisters_t ); i++ )
+    {
+        SetModem( RadioRegsInit[i].Modem );
+        Write( RadioRegsInit[i].Addr, RadioRegsInit[i].Value );
+    }    
+}
+
+void SX1272MB1DxS::SpiInit( void )
+{
+    nss = 1;    
+    spi.format( 8,0 );   
+    uint32_t frequencyToSet = 8000000;
+    #if( defined ( TARGET_NUCLEO_L152RE ) || defined ( TARGET_MOTE_L152RC ) ||  defined ( TARGET_LPC11U6X ) )
+        spi.frequency( frequencyToSet );
+    #elif( defined ( TARGET_KL25Z ) ) //busclock frequency is halved -> double the spi frequency to compensate
+        spi.frequency( frequencyToSet * 2 );
+    #else
+        #warning "Check the board's SPI frequency"
+    #endif
+    wait(0.1); 
+}
+
+void SX1272MB1DxS::IoIrqInit( DioIrqHandler *irqHandlers )
+{
+#if( defined ( TARGET_NUCLEO_L152RE ) || defined ( TARGET_MOTE_L152RC ) ||  defined ( TARGET_LPC11U6X ) )
+    dio0.mode( PullDown );
+    dio1.mode( PullDown );
+    dio2.mode( PullDown );
+    dio3.mode( PullDown );
+    dio4.mode( PullDown );
+#endif
+    dio0.rise( this, static_cast< TriggerMB1DxS > ( irqHandlers[0] ) );
+    dio1.rise( this, static_cast< TriggerMB1DxS > ( irqHandlers[1] ) );
+    dio2.rise( this, static_cast< TriggerMB1DxS > ( irqHandlers[2] ) );
+    dio3.rise( this, static_cast< TriggerMB1DxS > ( irqHandlers[3] ) );
+    dio4.rise( this, static_cast< TriggerMB1DxS > ( irqHandlers[4] ) );
+}
+
+void SX1272MB1DxS::IoDeInit( void )
+{
+    //nothing
+}
+
+uint8_t SX1272MB1DxS::GetPaSelect( uint32_t channel )
+{
+    if( boardConnected == SX1272MB1DCS )
+    {
+        return RF_PACONFIG_PASELECT_PABOOST;
+    }
+    else
+    {
+        return RF_PACONFIG_PASELECT_RFO;
+    }
+}
+
+void SX1272MB1DxS::SetAntSwLowPower( bool status )
+{
+    if( isRadioActive != status )
+    {
+        isRadioActive = status;
+    
+        if( status == false )
+        {
+            AntSwInit( );
+        }
+        else
+        {
+            AntSwDeInit( );
+        }
+    }
+}
+
+void SX1272MB1DxS::AntSwInit( void )
+{
+#if defined ( TARGET_MOTE_L152RC )
+    this->RfSwitchCntr1 = 0;
+    this->RfSwitchCntr2 = 0;
+    this->PwrAmpCntr = 0;
+#else
+    this->AntSwitch = 0;
+#endif
+}
+
+void SX1272MB1DxS::AntSwDeInit( void )
+{
+#if defined ( TARGET_MOTE_L152RC )
+    this->RfSwitchCntr1 = 0;
+    this->RfSwitchCntr2 = 0;
+    this->PwrAmpCntr = 0;
+#else
+    this->AntSwitch = 0;
+#endif
+}
+
+void SX1272MB1DxS::SetAntSw( uint8_t rxTx )
+{
+#if defined ( TARGET_MOTE_L152RC )
+    switch( this->currentOpMode )
+    {
+    case RFLR_OPMODE_TRANSMITTER:
+        if( ( Read( REG_PACONFIG ) & RF_PACONFIG_PASELECT_PABOOST ) == RF_PACONFIG_PASELECT_PABOOST )
+        {
+            this->RfSwitchCntr1 = 1;
+            this->RfSwitchCntr2 = 0;
+        }
+        else
+        {
+            this->RfSwitchCntr1 = 0;
+            this->RfSwitchCntr2 = 1;
+        }
+        break;
+    case RFLR_OPMODE_RECEIVER:
+    case RFLR_OPMODE_RECEIVER_SINGLE:
+    case RFLR_OPMODE_CAD:
+        this->RfSwitchCntr1 = 1;
+        this->RfSwitchCntr2 = 1;
+        break;
+    default:
+        this->RfSwitchCntr1 = 0;
+        this->RfSwitchCntr2 = 0;
+        this->PwrAmpCntr = 0;
+        break;
+    }
+#else
+    if( this->rxTx == rxTx )
+    {
+        //no need to go further
+        return;
+    }
+
+    this->rxTx = rxTx;
+
+    // 1: Tx, 0: Rx
+    if( rxTx != 0 )
+    {
+        this->AntSwitch = 1;
+    }
+    else
+    {
+        this->AntSwitch = 0;
+    }
+#endif
+}
+
+bool SX1272MB1DxS::CheckRfFrequency( uint32_t frequency )
+{
+    //TODO: Implement check, currently all frequencies are supported
+    return true;
+}
+
+
+void SX1272MB1DxS::Reset( void )
+{
+    reset.output();
+    reset = 0;
+    wait_ms( 1 );
+    reset.input();
+    wait_ms( 6 );
+}
+    
+void SX1272MB1DxS::Write( uint8_t addr, uint8_t data )
+{
+    Write( addr, &data, 1 );
+}
+
+uint8_t SX1272MB1DxS::Read( uint8_t addr )
+{
+    uint8_t data;
+    Read( addr, &data, 1 );
+    return data;
+}
+
+void SX1272MB1DxS::Write( uint8_t addr, uint8_t *buffer, uint8_t size )
+{
+    uint8_t i;
+
+    nss = 0;
+    spi.write( addr | 0x80 );
+    for( i = 0; i < size; i++ )
+    {
+        spi.write( buffer[i] );
+    }
+    nss = 1;
+}
+
+void SX1272MB1DxS::Read( uint8_t addr, uint8_t *buffer, uint8_t size )
+{
+    uint8_t i;
+
+    nss = 0;
+    spi.write( addr & 0x7F );
+    for( i = 0; i < size; i++ )
+    {
+        buffer[i] = spi.write( 0 );
+    }
+    nss = 1;
+}
+
+void SX1272MB1DxS::WriteFifo( uint8_t *buffer, uint8_t size )
+{
+    Write( 0, buffer, size );
+}
+
+void SX1272MB1DxS::ReadFifo( uint8_t *buffer, uint8_t size )
+{
+    Read( 0, buffer, size );
+}