08/13
Dependencies: ADXL345 BME280 HMC5883L ITG3200 MBed_Adafruit-GPS-Library XBee agzIDLIST cansat2 mbed
Fork of Cansat_program4 by
main.cpp@20:f92bdcda5a60, 2015-08-14 (annotated)
- Committer:
- s1200058
- Date:
- Fri Aug 14 04:56:21 2015 +0000
- Revision:
- 20:f92bdcda5a60
- Parent:
- 19:cb3a4b4c3526
- Child:
- 21:18a196d3021c
test
Who changed what in which revision?
User | Revision | Line number | New contents of line |
---|---|---|---|
kityann | 0:1fcc61be1dcf | 1 | /**********************************************/ |
kityann | 0:1fcc61be1dcf | 2 | //更新情報 |
kityann | 0:1fcc61be1dcf | 3 | |
kityann | 0:1fcc61be1dcf | 4 | /**********************************************/ |
kityann | 0:1fcc61be1dcf | 5 | |
kityann | 0:1fcc61be1dcf | 6 | #include "mbed.h" |
kityann | 0:1fcc61be1dcf | 7 | #include "XBee.h" |
kityann | 0:1fcc61be1dcf | 8 | #include "MBed_Adafruit_GPS.h" |
kityann | 1:f1f7413ae6bd | 9 | //#include "AigamozuControlPackets.h" |
kityann | 0:1fcc61be1dcf | 10 | #include "agzIDLIST.h" |
kityann | 0:1fcc61be1dcf | 11 | #include "aigamozuSetting.h" |
kityann | 1:f1f7413ae6bd | 12 | #include "HMC5883L.h" |
kityann | 1:f1f7413ae6bd | 13 | #include "VNH5019.h" |
kityann | 3:0bd9ad37f319 | 14 | #include "cansat.h" |
kityann | 0:1fcc61be1dcf | 15 | #include "math.h" |
s1200058 | 5:ba883a4bddc3 | 16 | #include "BME280.h" |
kityann | 0:1fcc61be1dcf | 17 | |
kityann | 0:1fcc61be1dcf | 18 | #define SIGMA_MIN 0.0001 |
kityann | 0:1fcc61be1dcf | 19 | |
s1210160 | 10:ce253d8a5f2c | 20 | #define STOP 0 //compass initial |
s1210160 | 10:ce253d8a5f2c | 21 | #define CAL 1 //compass calibration |
s1210160 | 10:ce253d8a5f2c | 22 | #define RUN 2 //compass run |
s1210160 | 10:ce253d8a5f2c | 23 | |
kityann | 0:1fcc61be1dcf | 24 | ///////////////////////////////////////// |
kityann | 0:1fcc61be1dcf | 25 | // |
kityann | 0:1fcc61be1dcf | 26 | //Pin Setting |
kityann | 0:1fcc61be1dcf | 27 | // |
kityann | 0:1fcc61be1dcf | 28 | ///////////////////////////////////////// |
s1200058 | 12:5724d4a57a4c | 29 | VNH5019 agz_motorShield(p23,p22,p25,p21,p24,p26); |
s1200058 | 12:5724d4a57a4c | 30 | //VNH5019 agz_motorShield(p21,p22,p23,p24,p25,p26); |
kityann | 0:1fcc61be1dcf | 31 | |
kityann | 0:1fcc61be1dcf | 32 | ///////////////////////////////////////// |
kityann | 0:1fcc61be1dcf | 33 | // |
kityann | 0:1fcc61be1dcf | 34 | //Connection Setting |
kityann | 0:1fcc61be1dcf | 35 | // |
kityann | 0:1fcc61be1dcf | 36 | ///////////////////////////////////////// |
kityann | 0:1fcc61be1dcf | 37 | |
kityann | 0:1fcc61be1dcf | 38 | //Serial Connect Setting: PC <--> mbed |
kityann | 0:1fcc61be1dcf | 39 | Serial pc(USBTX, USBRX); |
kityann | 0:1fcc61be1dcf | 40 | |
kityann | 0:1fcc61be1dcf | 41 | //Serial Connect Setting: GPS <--> mbed |
kityann | 0:1fcc61be1dcf | 42 | Serial * gps_Serial; |
kityann | 0:1fcc61be1dcf | 43 | |
kityann | 0:1fcc61be1dcf | 44 | //Serial Connect Setting: XBEE <--> mbed |
s1200058 | 12:5724d4a57a4c | 45 | Serial xbee(p13,p14); |
kityann | 0:1fcc61be1dcf | 46 | ZBRxResponse zbRx = ZBRxResponse(); |
kityann | 0:1fcc61be1dcf | 47 | |
s1210160 | 10:ce253d8a5f2c | 48 | // compass |
s1210160 | 10:ce253d8a5f2c | 49 | HMC5883L compass(p9, p10); |
s1210160 | 10:ce253d8a5f2c | 50 | |
kityann | 0:1fcc61be1dcf | 51 | //set up GPS module |
kityann | 0:1fcc61be1dcf | 52 | |
kityann | 0:1fcc61be1dcf | 53 | //set up AigamozuControlPackets library |
kityann | 1:f1f7413ae6bd | 54 | //AigamozuControlPackets agz(agz_motorShield); |
kityann | 3:0bd9ad37f319 | 55 | CanSat cansat(agz_motorShield); |
kityann | 0:1fcc61be1dcf | 56 | |
s1200058 | 5:ba883a4bddc3 | 57 | //set up for tempratures... |
s1200058 | 5:ba883a4bddc3 | 58 | #if defined(TARGET_LPC1768) |
s1200058 | 5:ba883a4bddc3 | 59 | BME280 sensor(p9, p10); |
s1200058 | 5:ba883a4bddc3 | 60 | #else |
s1200058 | 5:ba883a4bddc3 | 61 | BME280 sensor(I2C_SDA, I2C_SCL); |
s1200058 | 5:ba883a4bddc3 | 62 | #endif |
s1200058 | 5:ba883a4bddc3 | 63 | |
s1200058 | 5:ba883a4bddc3 | 64 | DigitalIn short_in(p29); |
s1200058 | 5:ba883a4bddc3 | 65 | DigitalOut short_out(p30); |
s1200058 | 5:ba883a4bddc3 | 66 | DigitalInOut nic(p5); |
kityann | 0:1fcc61be1dcf | 67 | |
s1200058 | 18:c86872baed44 | 68 | int short_flag = 0; |
s1200058 | 19:cb3a4b4c3526 | 69 | int running_flag = 0; |
s1200058 | 18:c86872baed44 | 70 | |
s1200058 | 12:5724d4a57a4c | 71 | Timer compass_Timer; |
s1200058 | 20:f92bdcda5a60 | 72 | const int compass_Time = 50; |
s1200058 | 18:c86872baed44 | 73 | Timer running_Timer; |
s1200058 | 20:f92bdcda5a60 | 74 | const int running_Time = 50; |
s1200058 | 18:c86872baed44 | 75 | Timer parachute_Timer; |
s1200058 | 18:c86872baed44 | 76 | const int parachute_Time = 30000; |
kityann | 0:1fcc61be1dcf | 77 | ///////////////////////////////////////// |
kityann | 0:1fcc61be1dcf | 78 | // |
s1210160 | 10:ce253d8a5f2c | 79 | //For Compass data |
s1210160 | 10:ce253d8a5f2c | 80 | // |
s1210160 | 10:ce253d8a5f2c | 81 | ///////////////////////////////////////// |
s1210160 | 10:ce253d8a5f2c | 82 | Ticker compass_interrupt; |
s1210160 | 10:ce253d8a5f2c | 83 | double heading0 = 0.0; |
s1210160 | 10:ce253d8a5f2c | 84 | double heading1 = 0.0; |
s1210160 | 10:ce253d8a5f2c | 85 | double heading2 = 0.0; |
s1210160 | 10:ce253d8a5f2c | 86 | double heading3 = 0.0; |
s1210160 | 10:ce253d8a5f2c | 87 | double headingLPF = 0.0; |
s1210160 | 10:ce253d8a5f2c | 88 | double initHeading; |
s1210160 | 10:ce253d8a5f2c | 89 | double tgtHeading; |
s1210160 | 10:ce253d8a5f2c | 90 | double preHeading = 0.0; |
s1210160 | 10:ce253d8a5f2c | 91 | |
s1210160 | 10:ce253d8a5f2c | 92 | int maxX, minX, maxY, minY; |
s1200058 | 20:f92bdcda5a60 | 93 | const int ofsX = -102; //calibration x |
s1200058 | 20:f92bdcda5a60 | 94 | const int ofsY = -381; //calibration y |
s1210160 | 10:ce253d8a5f2c | 95 | |
s1210160 | 10:ce253d8a5f2c | 96 | int16_t raw[3]; |
s1210160 | 10:ce253d8a5f2c | 97 | |
s1210160 | 10:ce253d8a5f2c | 98 | ///////////////////////////////////////// |
s1210160 | 10:ce253d8a5f2c | 99 | // |
kityann | 0:1fcc61be1dcf | 100 | //For Kalman data |
kityann | 0:1fcc61be1dcf | 101 | // |
kityann | 0:1fcc61be1dcf | 102 | ///////////////////////////////////////// |
kityann | 0:1fcc61be1dcf | 103 | #define FIRST_S2_1 1.0e-8 |
kityann | 0:1fcc61be1dcf | 104 | #define FIRST_S2_2 1.0e-6 |
kityann | 0:1fcc61be1dcf | 105 | #define COUNTER_MAX 10000 |
kityann | 0:1fcc61be1dcf | 106 | #define ERROR_RANGE 0.001 |
kityann | 0:1fcc61be1dcf | 107 | |
kityann | 0:1fcc61be1dcf | 108 | double x_cur,x_prev,y_cur,y_prev;//緯度と経度の時刻tと時刻t-1での推定値 |
kityann | 0:1fcc61be1dcf | 109 | double s2x_cur=FIRST_S2_1,s2x_prev=FIRST_S2_1,s2y_cur=FIRST_S2_1,s2y_prev=FIRST_S2_1;//緯度経度のの時刻tと時刻t-1での共分散 |
kityann | 0:1fcc61be1dcf | 110 | double s2_R=FIRST_S2_2;//GPSセンサの分散 |
kityann | 0:1fcc61be1dcf | 111 | double s2_Q=FIRST_S2_2; |
kityann | 0:1fcc61be1dcf | 112 | double Kx=0,Ky=0;//カルマンゲイン |
kityann | 0:1fcc61be1dcf | 113 | double zx,zy;//観測値 |
kityann | 0:1fcc61be1dcf | 114 | void Kalman(double Latitude,double Longitude); |
kityann | 0:1fcc61be1dcf | 115 | int change = 0; |
kityann | 0:1fcc61be1dcf | 116 | |
s1200058 | 18:c86872baed44 | 117 | int mode = -1; //ロボットのモード |
s1200058 | 19:cb3a4b4c3526 | 118 | double target_x = 139.987305,target_y = 40.142655; |
s1200058 | 19:cb3a4b4c3526 | 119 | double goal_Pressure = 1002.20, goal_Temperature,goal_Humidity; //地表地点の気圧、気温、湿度 |
kityann | 0:1fcc61be1dcf | 120 | |
s1200058 | 7:db6b436c0baa | 121 | Timer sep_Timer; |
s1200058 | 18:c86872baed44 | 122 | const int sep_Time = 3000; //seperate time in ms |
s1200058 | 7:db6b436c0baa | 123 | int fall_flag = 0; |
s1200058 | 7:db6b436c0baa | 124 | |
s1200058 | 14:4dfeeca65308 | 125 | int log_number = 0; |
s1200058 | 14:4dfeeca65308 | 126 | |
kityann | 0:1fcc61be1dcf | 127 | |
kityann | 0:1fcc61be1dcf | 128 | ///////////////////////////////////////// |
kityann | 0:1fcc61be1dcf | 129 | // |
kityann | 0:1fcc61be1dcf | 130 | //Kalman Processing |
kityann | 0:1fcc61be1dcf | 131 | // |
kityann | 0:1fcc61be1dcf | 132 | ///////////////////////////////////////// |
kityann | 0:1fcc61be1dcf | 133 | void calc_Kalman(){ |
kityann | 0:1fcc61be1dcf | 134 | //calc Kalman gain |
kityann | 0:1fcc61be1dcf | 135 | Kx = (s2x_prev+s2_Q)/(s2x_prev+s2_R+s2_Q); |
kityann | 0:1fcc61be1dcf | 136 | Ky = (s2y_prev+s2_Q)/(s2y_prev+s2_R+s2_Q); |
kityann | 0:1fcc61be1dcf | 137 | //estimate |
kityann | 0:1fcc61be1dcf | 138 | x_cur = x_prev + Kx*(zx-x_prev); |
kityann | 0:1fcc61be1dcf | 139 | y_cur = y_prev + Ky*(zy-y_prev); |
kityann | 0:1fcc61be1dcf | 140 | //calc sigma |
kityann | 0:1fcc61be1dcf | 141 | s2x_cur = (1-Kx)*(s2x_prev+s2_Q); |
kityann | 0:1fcc61be1dcf | 142 | s2y_cur = (1-Ky)*(s2y_prev+s2_Q); |
kityann | 0:1fcc61be1dcf | 143 | |
kityann | 0:1fcc61be1dcf | 144 | } |
kityann | 0:1fcc61be1dcf | 145 | |
kityann | 0:1fcc61be1dcf | 146 | void Kalman(double Latitude,double Longitude){ |
kityann | 0:1fcc61be1dcf | 147 | |
kityann | 0:1fcc61be1dcf | 148 | zx = Latitude; |
kityann | 0:1fcc61be1dcf | 149 | zy = Longitude; |
kityann | 0:1fcc61be1dcf | 150 | |
kityann | 0:1fcc61be1dcf | 151 | calc_Kalman(); |
kityann | 0:1fcc61be1dcf | 152 | |
kityann | 0:1fcc61be1dcf | 153 | //更新 |
kityann | 0:1fcc61be1dcf | 154 | x_prev = x_cur; |
kityann | 0:1fcc61be1dcf | 155 | y_prev = y_cur; |
kityann | 0:1fcc61be1dcf | 156 | s2x_prev = s2x_cur; |
kityann | 0:1fcc61be1dcf | 157 | s2y_prev = s2y_cur; |
kityann | 0:1fcc61be1dcf | 158 | |
kityann | 3:0bd9ad37f319 | 159 | //robotK\x,robotK_yに格納する |
kityann | 3:0bd9ad37f319 | 160 | cansat.set_robotKalman_x(x_cur); |
kityann | 3:0bd9ad37f319 | 161 | cansat.set_robotKalman_y(y_cur); |
kityann | 0:1fcc61be1dcf | 162 | } |
kityann | 0:1fcc61be1dcf | 163 | |
kityann | 0:1fcc61be1dcf | 164 | ///////////////////////////////////////// |
kityann | 0:1fcc61be1dcf | 165 | // |
kityann | 0:1fcc61be1dcf | 166 | //Get GPS function |
kityann | 0:1fcc61be1dcf | 167 | // |
kityann | 0:1fcc61be1dcf | 168 | ///////////////////////////////////////// |
kityann | 0:1fcc61be1dcf | 169 | |
kityann | 0:1fcc61be1dcf | 170 | void Get_GPS(Adafruit_GPS *myGPS){ |
kityann | 0:1fcc61be1dcf | 171 | static int flag = 0; |
kityann | 0:1fcc61be1dcf | 172 | |
kityann | 0:1fcc61be1dcf | 173 | if (myGPS->fix) { |
kityann | 0:1fcc61be1dcf | 174 | |
kityann | 3:0bd9ad37f319 | 175 | cansat.nowStatus = GPS_AVAIL; |
s1200058 | 19:cb3a4b4c3526 | 176 | cansat.set_robot_y((double)myGPS->latitudeH + (double)(myGPS->latitudeL / 10000.0 / 60.0)); |
s1200058 | 19:cb3a4b4c3526 | 177 | cansat.set_robot_x((double)myGPS->longitudeH +(double)(myGPS->longitudeL / 10000.0 / 60.0)); |
kityann | 3:0bd9ad37f319 | 178 | |
kityann | 0:1fcc61be1dcf | 179 | |
kityann | 0:1fcc61be1dcf | 180 | if(flag < COUNTER_MAX){ |
kityann | 0:1fcc61be1dcf | 181 | flag++; |
kityann | 0:1fcc61be1dcf | 182 | } |
kityann | 0:1fcc61be1dcf | 183 | if(flag == 5){ |
kityann | 3:0bd9ad37f319 | 184 | x_prev = cansat.get_robot_x(); |
kityann | 3:0bd9ad37f319 | 185 | y_prev = cansat.get_robot_y(); |
kityann | 0:1fcc61be1dcf | 186 | } |
kityann | 0:1fcc61be1dcf | 187 | |
kityann | 0:1fcc61be1dcf | 188 | if(flag >= 6){ |
kityann | 3:0bd9ad37f319 | 189 | if(abs(x_prev - cansat.get_robot_x()) < ERROR_RANGE && abs(y_prev - cansat.get_robot_y()) < ERROR_RANGE){ |
kityann | 3:0bd9ad37f319 | 190 | Kalman(cansat.get_robot_x(), cansat.get_robot_y()); |
kityann | 0:1fcc61be1dcf | 191 | change = 1; |
kityann | 0:1fcc61be1dcf | 192 | } |
kityann | 0:1fcc61be1dcf | 193 | else{ |
kityann | 0:1fcc61be1dcf | 194 | change = 0; |
kityann | 0:1fcc61be1dcf | 195 | } |
kityann | 1:f1f7413ae6bd | 196 | //printf("%.14lf %.14lf %.14lf %.14lf %.14le %.14le \n", |
kityann | 1:f1f7413ae6bd | 197 | //agz.get_agzPoint_lati(),agz.get_agzPoint_longi(), |
kityann | 1:f1f7413ae6bd | 198 | //agz.get_agzPointKalman_lati(),agz.get_agzPointKalman_longi(), |
kityann | 1:f1f7413ae6bd | 199 | //agz.get_agzCov_lati(),agz.get_agzCov_longi()); |
kityann | 1:f1f7413ae6bd | 200 | } |
kityann | 0:1fcc61be1dcf | 201 | } |
kityann | 3:0bd9ad37f319 | 202 | else cansat.nowStatus = GPS_UNAVAIL; |
kityann | 0:1fcc61be1dcf | 203 | |
kityann | 0:1fcc61be1dcf | 204 | } |
kityann | 0:1fcc61be1dcf | 205 | |
aoki0731 | 4:0fc7221e2f79 | 206 | //ロボットの動き方 |
s1200058 | 11:19091694455e | 207 | char robot_Action(int robot_angle, int target_angle) { |
aoki0731 | 4:0fc7221e2f79 | 208 | |
s1200058 | 11:19091694455e | 209 | int n, t, r; |
aoki0731 | 4:0fc7221e2f79 | 210 | t = target_angle; |
aoki0731 | 4:0fc7221e2f79 | 211 | r = robot_angle; |
aoki0731 | 4:0fc7221e2f79 | 212 | n = r - t; |
aoki0731 | 4:0fc7221e2f79 | 213 | if(n<0) n *= -1; |
aoki0731 | 4:0fc7221e2f79 | 214 | |
aoki0731 | 4:0fc7221e2f79 | 215 | |
aoki0731 | 4:0fc7221e2f79 | 216 | if(t==r) { |
aoki0731 | 4:0fc7221e2f79 | 217 | //前進 |
aoki0731 | 4:0fc7221e2f79 | 218 | return 'f'; |
s1200058 | 20:f92bdcda5a60 | 219 | } else if(n == 4) { |
s1200058 | 20:f92bdcda5a60 | 220 | return 'r'; |
s1200058 | 20:f92bdcda5a60 | 221 | } else if(n > 0 && n < 4) { |
aoki0731 | 4:0fc7221e2f79 | 222 | if(t > r) |
s1200058 | 20:f92bdcda5a60 | 223 | return 'r'; |
aoki0731 | 4:0fc7221e2f79 | 224 | else |
s1200058 | 20:f92bdcda5a60 | 225 | return 'l'; |
s1200058 | 20:f92bdcda5a60 | 226 | } else if(n > 4 && n < 8){ |
s1200058 | 20:f92bdcda5a60 | 227 | if(t > r) |
aoki0731 | 4:0fc7221e2f79 | 228 | return 'l'; |
aoki0731 | 4:0fc7221e2f79 | 229 | else |
aoki0731 | 4:0fc7221e2f79 | 230 | return 'r'; |
s1200058 | 20:f92bdcda5a60 | 231 | } else |
s1200058 | 20:f92bdcda5a60 | 232 | return 'b'; |
aoki0731 | 4:0fc7221e2f79 | 233 | |
aoki0731 | 4:0fc7221e2f79 | 234 | } |
aoki0731 | 4:0fc7221e2f79 | 235 | |
s1200058 | 5:ba883a4bddc3 | 236 | //対象とロボットの角度 |
s1200058 | 5:ba883a4bddc3 | 237 | double robot_compass(double robot_x, double robot_y) { |
s1200058 | 5:ba883a4bddc3 | 238 | double angle = 0; |
s1200058 | 5:ba883a4bddc3 | 239 | |
s1200058 | 5:ba883a4bddc3 | 240 | if(robot_x==0&&robot_y>0) |
s1200058 | 5:ba883a4bddc3 | 241 | return 0; |
s1200058 | 5:ba883a4bddc3 | 242 | else if(robot_x>0&&robot_y==0) //東 |
s1200058 | 5:ba883a4bddc3 | 243 | return 90; |
s1200058 | 5:ba883a4bddc3 | 244 | else if(robot_x==0&&robot_y<0) //南 |
s1200058 | 5:ba883a4bddc3 | 245 | return 180; |
s1200058 | 5:ba883a4bddc3 | 246 | else if(robot_x<0&&robot_y==0) //西 |
s1200058 | 5:ba883a4bddc3 | 247 | return 270; |
s1200058 | 5:ba883a4bddc3 | 248 | else if(robot_x>=0&&robot_y>=0) { //北東 |
s1200058 | 5:ba883a4bddc3 | 249 | if(robot_x<=robot_y) |
s1200058 | 5:ba883a4bddc3 | 250 | angle = atan2(robot_x, robot_y); |
s1200058 | 5:ba883a4bddc3 | 251 | else |
s1200058 | 5:ba883a4bddc3 | 252 | angle = (M_PI/2) - atan2(robot_y, robot_x); |
s1200058 | 5:ba883a4bddc3 | 253 | return angle * 180.0 / M_PI; |
s1200058 | 5:ba883a4bddc3 | 254 | } else if(robot_x>=0&&robot_y<0) { //南東 |
s1200058 | 5:ba883a4bddc3 | 255 | if(robot_x>abs(robot_y)){ |
s1200058 | 5:ba883a4bddc3 | 256 | angle = (M_PI/2) - atan2(abs(robot_y), robot_x); |
s1200058 | 5:ba883a4bddc3 | 257 | } |
s1200058 | 5:ba883a4bddc3 | 258 | else{ |
s1200058 | 5:ba883a4bddc3 | 259 | angle = atan2(abs(robot_y), robot_x); |
s1200058 | 5:ba883a4bddc3 | 260 | } |
s1200058 | 5:ba883a4bddc3 | 261 | return angle * 180.0 / M_PI + 90; |
s1200058 | 5:ba883a4bddc3 | 262 | } else if(robot_x<0&&robot_y<0) { //南西 |
s1200058 | 5:ba883a4bddc3 | 263 | if(abs(robot_x)<abs(robot_y)){ |
s1200058 | 5:ba883a4bddc3 | 264 | angle = atan2(abs(robot_x), abs(robot_y)); |
s1200058 | 5:ba883a4bddc3 | 265 | } |
s1200058 | 5:ba883a4bddc3 | 266 | else{ |
s1200058 | 5:ba883a4bddc3 | 267 | angle = (M_PI/2) - atan2(abs(robot_y), abs(robot_x)); |
s1200058 | 5:ba883a4bddc3 | 268 | } |
s1200058 | 5:ba883a4bddc3 | 269 | return angle * 180.0 / M_PI + 180; |
s1200058 | 5:ba883a4bddc3 | 270 | } else if(robot_x<0&&robot_y>=0) { //北西 |
s1200058 | 5:ba883a4bddc3 | 271 | if(abs(robot_x)>robot_y){ |
s1200058 | 5:ba883a4bddc3 | 272 | angle = (M_PI/2) - atan2(robot_y, abs(robot_x)); |
s1200058 | 5:ba883a4bddc3 | 273 | } |
s1200058 | 5:ba883a4bddc3 | 274 | else{ |
s1200058 | 5:ba883a4bddc3 | 275 | angle = atan2(abs(robot_x), robot_y); |
s1200058 | 5:ba883a4bddc3 | 276 | } |
kityann | 9:2741e17438d6 | 277 | return 360 - angle * 180.0 / M_PI; |
s1200058 | 5:ba883a4bddc3 | 278 | } |
s1200058 | 5:ba883a4bddc3 | 279 | |
s1200058 | 5:ba883a4bddc3 | 280 | return -1; |
s1200058 | 5:ba883a4bddc3 | 281 | } |
s1200058 | 5:ba883a4bddc3 | 282 | |
s1210160 | 10:ce253d8a5f2c | 283 | int calc_angle(double c){ |
s1200058 | 11:19091694455e | 284 | if(c > 337.5 ||(c >=0 && c < 22.5)) return 0; |
s1210160 | 10:ce253d8a5f2c | 285 | else if(c >= 22.5 && c < 67.5) return 1; |
s1210160 | 10:ce253d8a5f2c | 286 | else if(c >= 67.5 && c < 112.5) return 2; |
s1210160 | 10:ce253d8a5f2c | 287 | else if(c >= 112.5 && c < 157.5) return 3; |
s1210160 | 10:ce253d8a5f2c | 288 | else if(c >= 157.5 && c < 202.5) return 4; |
s1210160 | 10:ce253d8a5f2c | 289 | else if(c >= 202.5 && c < 247.5) return 5; |
s1210160 | 10:ce253d8a5f2c | 290 | else if(c >= 247.5 && c < 292.5) return 6; |
s1210160 | 10:ce253d8a5f2c | 291 | else if(c >= 292.5 && c < 337.5) return 7; |
s1210160 | 10:ce253d8a5f2c | 292 | else return 8; |
s1210160 | 10:ce253d8a5f2c | 293 | } |
s1200058 | 5:ba883a4bddc3 | 294 | |
s1210160 | 10:ce253d8a5f2c | 295 | void Compass_intrpt(){ |
s1210160 | 10:ce253d8a5f2c | 296 | |
s1210160 | 10:ce253d8a5f2c | 297 | compass.getXYZ(raw); |
s1210160 | 10:ce253d8a5f2c | 298 | double heading = atan2(static_cast<double>(raw[2]-ofsY), static_cast<double>(raw[0]-ofsX)); //y=raw[2] |
s1210160 | 10:ce253d8a5f2c | 299 | if(heading < 0)heading += 2*M_PI; |
s1210160 | 10:ce253d8a5f2c | 300 | if(heading > 2*M_PI)heading -= 2*M_PI; |
s1210160 | 10:ce253d8a5f2c | 301 | heading3 = heading2; |
s1210160 | 10:ce253d8a5f2c | 302 | heading2 = heading1; |
s1210160 | 10:ce253d8a5f2c | 303 | heading1 = heading0; |
s1210160 | 10:ce253d8a5f2c | 304 | heading0 = heading; |
s1200058 | 19:cb3a4b4c3526 | 305 | headingLPF = (heading0 + heading1 + heading2 + heading3)/4.0; //low pass filter |
s1210160 | 10:ce253d8a5f2c | 306 | |
s1210160 | 10:ce253d8a5f2c | 307 | headingLPF = headingLPF * 180.0 / M_PI; |
s1210160 | 10:ce253d8a5f2c | 308 | // pc.printf("heading=%f\r\n",headingLPF); |
s1210160 | 10:ce253d8a5f2c | 309 | |
s1210160 | 10:ce253d8a5f2c | 310 | cansat.set_compass(raw[0], raw[2], raw[1], headingLPF); |
s1200058 | 18:c86872baed44 | 311 | cansat.set_robot_angle(calc_angle(cansat.get_compass_angle())); |
s1210160 | 10:ce253d8a5f2c | 312 | } |
s1210160 | 10:ce253d8a5f2c | 313 | |
s1210160 | 10:ce253d8a5f2c | 314 | |
kityann | 0:1fcc61be1dcf | 315 | /****************************** |
kityann | 0:1fcc61be1dcf | 316 | スタンバイモード |
kityann | 0:1fcc61be1dcf | 317 | ******************************/ |
kityann | 0:1fcc61be1dcf | 318 | void standby(){ |
s1200058 | 5:ba883a4bddc3 | 319 | |
s1200058 | 6:23bb3b018f44 | 320 | cansat.control_Motor(1, cansat.get_speed()); |
s1200058 | 18:c86872baed44 | 321 | if(!short_in){ |
s1200058 | 18:c86872baed44 | 322 | xbee.printf("change mode: falling\n"); |
s1200058 | 18:c86872baed44 | 323 | short_flag++; |
s1200058 | 18:c86872baed44 | 324 | } |
s1200058 | 18:c86872baed44 | 325 | else{ |
s1200058 | 18:c86872baed44 | 326 | if(running_Timer.read_ms() >= running_Time){ |
s1200058 | 18:c86872baed44 | 327 | running_Timer.reset(); |
s1200058 | 18:c86872baed44 | 328 | xbee.printf("stand by\n"); |
s1200058 | 18:c86872baed44 | 329 | } |
s1200058 | 18:c86872baed44 | 330 | } |
s1200058 | 18:c86872baed44 | 331 | if(short_flag >= 5){ |
s1200058 | 5:ba883a4bddc3 | 332 | mode = 1; |
s1200058 | 19:cb3a4b4c3526 | 333 | parachute_Timer.start(); |
s1200058 | 5:ba883a4bddc3 | 334 | } |
s1200058 | 5:ba883a4bddc3 | 335 | |
kityann | 0:1fcc61be1dcf | 336 | } |
kityann | 0:1fcc61be1dcf | 337 | |
kityann | 0:1fcc61be1dcf | 338 | /****************************** |
kityann | 0:1fcc61be1dcf | 339 | 落下モード |
kityann | 0:1fcc61be1dcf | 340 | ******************************/ |
s1200058 | 15:dd7c2ab65a09 | 341 | void falling_print(){ |
s1200058 | 15:dd7c2ab65a09 | 342 | |
s1200058 | 19:cb3a4b4c3526 | 343 | xbee.printf("%d: %04.2f hPa\n", log_number, cansat.get_pressure()); |
s1200058 | 15:dd7c2ab65a09 | 344 | |
s1200058 | 15:dd7c2ab65a09 | 345 | log_number++; |
s1200058 | 15:dd7c2ab65a09 | 346 | |
s1200058 | 15:dd7c2ab65a09 | 347 | } |
s1200058 | 15:dd7c2ab65a09 | 348 | |
kityann | 0:1fcc61be1dcf | 349 | void falling(){ |
s1200058 | 7:db6b436c0baa | 350 | |
s1200058 | 7:db6b436c0baa | 351 | cansat.set_temperature(sensor.getTemperature()); |
s1200058 | 7:db6b436c0baa | 352 | cansat.set_pressure(sensor.getPressure()); |
s1200058 | 7:db6b436c0baa | 353 | cansat.set_humidity(sensor.getHumidity()); |
s1200058 | 7:db6b436c0baa | 354 | |
s1200058 | 18:c86872baed44 | 355 | falling_print(); |
s1200058 | 18:c86872baed44 | 356 | |
s1200058 | 5:ba883a4bddc3 | 357 | if(cansat.get_pressure() >= goal_Pressure){ |
s1200058 | 7:db6b436c0baa | 358 | if(fall_flag == 0){ |
s1200058 | 7:db6b436c0baa | 359 | nic = 1; |
s1200058 | 7:db6b436c0baa | 360 | fall_flag = 1; |
s1200058 | 7:db6b436c0baa | 361 | sep_Timer.reset(); |
s1200058 | 7:db6b436c0baa | 362 | mode = 2; |
s1200058 | 18:c86872baed44 | 363 | xbee.printf("my pressure is high!\n"); |
s1200058 | 18:c86872baed44 | 364 | xbee.printf("remove the parachute\n"); |
s1200058 | 14:4dfeeca65308 | 365 | xbee.printf("change mode: running\n"); |
s1200058 | 7:db6b436c0baa | 366 | } |
s1200058 | 18:c86872baed44 | 367 | } |
s1200058 | 18:c86872baed44 | 368 | if(fall_flag == 0 && parachute_Timer.read_ms() >= parachute_Time){ |
s1200058 | 18:c86872baed44 | 369 | mode = 2; |
s1200058 | 18:c86872baed44 | 370 | nic = 1; |
s1200058 | 18:c86872baed44 | 371 | xbee.printf("Time out!\n"); |
s1200058 | 18:c86872baed44 | 372 | xbee.printf("remove the parachute\n"); |
s1200058 | 18:c86872baed44 | 373 | wait_ms(3000); |
s1200058 | 18:c86872baed44 | 374 | nic = 0; |
s1200058 | 18:c86872baed44 | 375 | xbee.printf("change mode: running\n"); |
s1200058 | 7:db6b436c0baa | 376 | |
s1200058 | 5:ba883a4bddc3 | 377 | } |
s1200058 | 15:dd7c2ab65a09 | 378 | |
s1200058 | 15:dd7c2ab65a09 | 379 | |
kityann | 0:1fcc61be1dcf | 380 | } |
kityann | 0:1fcc61be1dcf | 381 | |
kityann | 0:1fcc61be1dcf | 382 | /****************************** |
kityann | 0:1fcc61be1dcf | 383 | 走行モード |
kityann | 0:1fcc61be1dcf | 384 | ******************************/ |
s1200058 | 14:4dfeeca65308 | 385 | |
s1200058 | 14:4dfeeca65308 | 386 | void running_print(){ |
s1200058 | 14:4dfeeca65308 | 387 | |
s1200058 | 19:cb3a4b4c3526 | 388 | if(running_flag <= 20){ |
s1200058 | 19:cb3a4b4c3526 | 389 | xbee.printf("%d: %f, %f, %d\n", log_number, cansat.get_robot_x(), cansat.get_robot_y(), cansat.get_speed()); |
s1200058 | 19:cb3a4b4c3526 | 390 | } |
s1200058 | 19:cb3a4b4c3526 | 391 | else{ |
s1200058 | 19:cb3a4b4c3526 | 392 | xbee.printf("%d: %f, %f, %d\n", log_number, cansat.get_robotKalman_x(), cansat.get_robotKalman_y(), cansat.get_speed()); |
s1200058 | 19:cb3a4b4c3526 | 393 | } |
s1200058 | 19:cb3a4b4c3526 | 394 | xbee.printf("%c, %f\n", cansat.motor_command, cansat.get_compass_angle()); |
s1200058 | 19:cb3a4b4c3526 | 395 | xbee.printf("%d, %d\n",cansat.get_robot_angle(), cansat.get_target_angle()); |
s1200058 | 19:cb3a4b4c3526 | 396 | // double y1 = cansat.get_target_y(); |
s1200058 | 19:cb3a4b4c3526 | 397 | // double y2 = cansat.get_robot_y(); |
s1200058 | 19:cb3a4b4c3526 | 398 | // double x1 = cansat.get_target_x(); |
s1200058 | 19:cb3a4b4c3526 | 399 | // double x2 = cansat.get_robot_x(); |
s1200058 | 19:cb3a4b4c3526 | 400 | // xbee.printf("taret_angle:%f",robot_compass(x1-x2, y1-y2)); |
s1200058 | 14:4dfeeca65308 | 401 | |
s1200058 | 14:4dfeeca65308 | 402 | log_number++; |
s1200058 | 14:4dfeeca65308 | 403 | |
s1200058 | 14:4dfeeca65308 | 404 | } |
s1200058 | 14:4dfeeca65308 | 405 | |
kityann | 0:1fcc61be1dcf | 406 | void running(){ |
s1200058 | 14:4dfeeca65308 | 407 | |
s1200058 | 18:c86872baed44 | 408 | // double r = 6378.137; |
s1200058 | 5:ba883a4bddc3 | 409 | double y1 = cansat.get_target_y(); |
s1200058 | 5:ba883a4bddc3 | 410 | double y2 = cansat.get_robot_y(); |
s1200058 | 5:ba883a4bddc3 | 411 | double x1 = cansat.get_target_x(); |
s1200058 | 5:ba883a4bddc3 | 412 | double x2 = cansat.get_robot_x(); |
s1200058 | 19:cb3a4b4c3526 | 413 | double x_k2 = cansat.get_robotKalman_x(); |
s1200058 | 19:cb3a4b4c3526 | 414 | double y_k2 = cansat.get_robotKalman_y(); |
s1200058 | 5:ba883a4bddc3 | 415 | double dx = x2 - x1; |
s1200058 | 18:c86872baed44 | 416 | double dy = y2 - y1; |
s1200058 | 19:cb3a4b4c3526 | 417 | double dx_k = x_k2 - x1; |
s1200058 | 19:cb3a4b4c3526 | 418 | double dy_k = y_k2 - y1; |
s1200058 | 19:cb3a4b4c3526 | 419 | double y_sub; |
s1200058 | 19:cb3a4b4c3526 | 420 | double x_sub; |
s1200058 | 19:cb3a4b4c3526 | 421 | |
s1200058 | 19:cb3a4b4c3526 | 422 | if(running_flag < 20){ |
s1200058 | 19:cb3a4b4c3526 | 423 | y_sub = dy*111135.0; |
s1200058 | 19:cb3a4b4c3526 | 424 | x_sub = dx*91191.0; |
s1200058 | 19:cb3a4b4c3526 | 425 | cansat.set_target_distance(sqrt(y_sub*y_sub + x_sub*x_sub)); |
s1200058 | 19:cb3a4b4c3526 | 426 | cansat.set_target_angle(calc_angle(robot_compass(x1-x2, y1-y2))); |
s1200058 | 19:cb3a4b4c3526 | 427 | running_flag++; |
s1200058 | 19:cb3a4b4c3526 | 428 | } |
s1200058 | 19:cb3a4b4c3526 | 429 | else{ |
s1200058 | 19:cb3a4b4c3526 | 430 | y_sub = dy_k*111135.0; |
s1200058 | 19:cb3a4b4c3526 | 431 | x_sub = dx_k*91191.0; |
s1200058 | 19:cb3a4b4c3526 | 432 | cansat.set_target_distance(sqrt(y_sub*y_sub + x_sub*x_sub)); |
s1200058 | 19:cb3a4b4c3526 | 433 | cansat.set_target_angle(calc_angle(robot_compass(x1-x_k2, y1-y_k2))); |
s1200058 | 19:cb3a4b4c3526 | 434 | } |
s1200058 | 14:4dfeeca65308 | 435 | |
s1200058 | 19:cb3a4b4c3526 | 436 | if(cansat.get_target_distance() < 10) cansat.set_speed(64); |
s1200058 | 19:cb3a4b4c3526 | 437 | else if(cansat.get_target_distance() < 20 && cansat.get_target_distance() > 10) cansat.set_speed(128); |
s1200058 | 19:cb3a4b4c3526 | 438 | else cansat.set_speed(255); |
s1200058 | 5:ba883a4bddc3 | 439 | |
s1200058 | 18:c86872baed44 | 440 | if(fall_flag == 1 && sep_Timer.read_ms() >= sep_Time){ |
s1200058 | 18:c86872baed44 | 441 | nic = 0; |
s1200058 | 18:c86872baed44 | 442 | } |
s1200058 | 12:5724d4a57a4c | 443 | if(compass_Timer.read_ms() >= compass_Time){ |
s1200058 | 12:5724d4a57a4c | 444 | compass_Timer.reset(); |
s1200058 | 12:5724d4a57a4c | 445 | if(cansat.get_compass_z() < 0) { |
s1200058 | 12:5724d4a57a4c | 446 | //ひっくり返っている |
s1200058 | 12:5724d4a57a4c | 447 | cansat.control_Motor(0, cansat.get_speed()); |
s1200058 | 12:5724d4a57a4c | 448 | } else { |
s1200058 | 14:4dfeeca65308 | 449 | cansat.motor_command = robot_Action(cansat.get_robot_angle(), cansat.get_target_angle()); |
s1200058 | 14:4dfeeca65308 | 450 | switch(cansat.motor_command) { |
s1200058 | 12:5724d4a57a4c | 451 | case 'f': //前進 |
s1200058 | 12:5724d4a57a4c | 452 | cansat.control_Motor(0, cansat.get_speed()); |
s1200058 | 12:5724d4a57a4c | 453 | break; |
s1200058 | 12:5724d4a57a4c | 454 | case 'l': |
s1200058 | 12:5724d4a57a4c | 455 | cansat.control_Motor(2, cansat.get_speed()); |
s1200058 | 12:5724d4a57a4c | 456 | break; |
s1200058 | 12:5724d4a57a4c | 457 | case 'r': |
s1200058 | 12:5724d4a57a4c | 458 | cansat.control_Motor(3, cansat.get_speed()); |
s1200058 | 12:5724d4a57a4c | 459 | break; |
s1200058 | 13:4f3fd6c4ddc2 | 460 | case 'b': |
s1200058 | 13:4f3fd6c4ddc2 | 461 | cansat.control_Motor(4, cansat.get_speed()); |
s1200058 | 13:4f3fd6c4ddc2 | 462 | break; |
s1200058 | 12:5724d4a57a4c | 463 | } |
s1200058 | 5:ba883a4bddc3 | 464 | } |
s1200058 | 5:ba883a4bddc3 | 465 | } |
s1200058 | 18:c86872baed44 | 466 | |
s1200058 | 18:c86872baed44 | 467 | running_print(); |
s1200058 | 18:c86872baed44 | 468 | |
s1200058 | 7:db6b436c0baa | 469 | if(cansat.get_target_distance() <= 1){ |
s1200058 | 6:23bb3b018f44 | 470 | mode = 100; |
s1200058 | 14:4dfeeca65308 | 471 | xbee.printf("change mode: stopping\n"); |
s1200058 | 14:4dfeeca65308 | 472 | xbee.printf("it is goal point.\n"); |
s1200058 | 6:23bb3b018f44 | 473 | } |
kityann | 0:1fcc61be1dcf | 474 | } |
kityann | 0:1fcc61be1dcf | 475 | |
kityann | 0:1fcc61be1dcf | 476 | /****************************** |
kityann | 0:1fcc61be1dcf | 477 | 停止モード |
kityann | 0:1fcc61be1dcf | 478 | ******************************/ |
kityann | 0:1fcc61be1dcf | 479 | void stopping(){ |
kityann | 0:1fcc61be1dcf | 480 | |
s1200058 | 13:4f3fd6c4ddc2 | 481 | cansat.control_Motor(1, cansat.get_speed()); |
kityann | 0:1fcc61be1dcf | 482 | |
kityann | 0:1fcc61be1dcf | 483 | } |
kityann | 0:1fcc61be1dcf | 484 | |
kityann | 0:1fcc61be1dcf | 485 | ///////////////////////////////////////// |
kityann | 0:1fcc61be1dcf | 486 | // |
kityann | 0:1fcc61be1dcf | 487 | //Main Processing |
kityann | 0:1fcc61be1dcf | 488 | // |
kityann | 0:1fcc61be1dcf | 489 | ///////////////////////////////////////// |
kityann | 0:1fcc61be1dcf | 490 | int main() { |
kityann | 0:1fcc61be1dcf | 491 | //start up time |
kityann | 0:1fcc61be1dcf | 492 | wait(3); |
kityann | 0:1fcc61be1dcf | 493 | //set pc frequency to 57600bps |
kityann | 0:1fcc61be1dcf | 494 | pc.baud(PC_BAUD_RATE); |
kityann | 0:1fcc61be1dcf | 495 | //set xbee frequency to 57600bps |
s1200058 | 12:5724d4a57a4c | 496 | //xbee.begin(XBEE_BAUD_RATE); |
s1200058 | 19:cb3a4b4c3526 | 497 | xbee.baud(57600); |
s1210160 | 10:ce253d8a5f2c | 498 | //Compass setting |
s1210160 | 10:ce253d8a5f2c | 499 | compass.init(); |
kityann | 0:1fcc61be1dcf | 500 | |
kityann | 0:1fcc61be1dcf | 501 | //GPS setting |
kityann | 0:1fcc61be1dcf | 502 | gps_Serial = new Serial(p28,p27); |
kityann | 0:1fcc61be1dcf | 503 | Adafruit_GPS myGPS(gps_Serial); |
kityann | 0:1fcc61be1dcf | 504 | Timer refresh_Timer; |
kityann | 0:1fcc61be1dcf | 505 | const int refresh_Time = 1000; //refresh time in ms |
kityann | 0:1fcc61be1dcf | 506 | int count = 0; |
s1200058 | 19:cb3a4b4c3526 | 507 | Timer compass_refresh_Timer; |
s1200058 | 19:cb3a4b4c3526 | 508 | const int compass_refresh_Time = 500; |
kityann | 0:1fcc61be1dcf | 509 | |
kityann | 0:1fcc61be1dcf | 510 | myGPS.begin(GPS_BAUD_RATE); |
kityann | 0:1fcc61be1dcf | 511 | |
kityann | 0:1fcc61be1dcf | 512 | //GPS Send Command |
kityann | 0:1fcc61be1dcf | 513 | myGPS.sendCommand(PMTK_SET_NMEA_OUTPUT_RMCONLY); |
kityann | 0:1fcc61be1dcf | 514 | myGPS.sendCommand(PMTK_SET_NMEA_UPDATE_1HZ); |
kityann | 0:1fcc61be1dcf | 515 | myGPS.sendCommand(PGCMD_ANTENNA); |
kityann | 0:1fcc61be1dcf | 516 | |
kityann | 0:1fcc61be1dcf | 517 | wait_ms(2000); |
kityann | 0:1fcc61be1dcf | 518 | |
kityann | 0:1fcc61be1dcf | 519 | //interrupt start |
kityann | 0:1fcc61be1dcf | 520 | refresh_Timer.start(); |
s1200058 | 13:4f3fd6c4ddc2 | 521 | compass_Timer.start(); |
s1200058 | 14:4dfeeca65308 | 522 | running_Timer.start(); |
s1200058 | 18:c86872baed44 | 523 | sep_Timer.start(); |
s1200058 | 19:cb3a4b4c3526 | 524 | compass_refresh_Timer.start(); |
s1200058 | 11:19091694455e | 525 | cansat.set_target(target_x, target_y); |
s1200058 | 12:5724d4a57a4c | 526 | // wait_ms(10000); |
s1200058 | 11:19091694455e | 527 | |
s1200058 | 19:cb3a4b4c3526 | 528 | //compass_interrupt.attach(&Compass_intrpt, 0.5); |
s1200058 | 19:cb3a4b4c3526 | 529 | |
kityann | 0:1fcc61be1dcf | 530 | |
kityann | 0:1fcc61be1dcf | 531 | printf("start\n"); |
s1200058 | 19:cb3a4b4c3526 | 532 | xbee.printf("target: %f, %f\n",cansat.get_target_x(), cansat.get_target_y()); |
s1200058 | 12:5724d4a57a4c | 533 | //int mode = -1; |
s1200058 | 5:ba883a4bddc3 | 534 | nic.output(); |
s1200058 | 5:ba883a4bddc3 | 535 | nic = 0; |
kityann | 0:1fcc61be1dcf | 536 | |
s1200058 | 18:c86872baed44 | 537 | short_out = 1; |
s1200058 | 18:c86872baed44 | 538 | wait_ms(1000); |
s1200058 | 19:cb3a4b4c3526 | 539 | // if(short_out){ |
s1200058 | 19:cb3a4b4c3526 | 540 | // xbee.printf("HIGH\n"); |
s1200058 | 19:cb3a4b4c3526 | 541 | // } |
s1200058 | 18:c86872baed44 | 542 | |
kityann | 0:1fcc61be1dcf | 543 | while (true) { |
s1200058 | 19:cb3a4b4c3526 | 544 | |
s1200058 | 19:cb3a4b4c3526 | 545 | myGPS.read(); |
s1200058 | 19:cb3a4b4c3526 | 546 | //recive gps module |
s1200058 | 19:cb3a4b4c3526 | 547 | //check if we recieved a new message from GPS, if so, attempt to parse it, |
s1200058 | 19:cb3a4b4c3526 | 548 | if ( myGPS.newNMEAreceived() ) { |
s1200058 | 19:cb3a4b4c3526 | 549 | if ( !myGPS.parse(myGPS.lastNMEA()) ) { |
s1200058 | 19:cb3a4b4c3526 | 550 | continue; |
s1200058 | 19:cb3a4b4c3526 | 551 | } |
s1200058 | 19:cb3a4b4c3526 | 552 | else{ |
s1200058 | 19:cb3a4b4c3526 | 553 | count++; |
s1200058 | 19:cb3a4b4c3526 | 554 | } |
s1200058 | 19:cb3a4b4c3526 | 555 | } |
s1200058 | 19:cb3a4b4c3526 | 556 | //一定時間ごとに自分のGPSデータを取得し、AigamozuControlPacketsないのagzPointとagzPointKalmanに格納する |
s1200058 | 19:cb3a4b4c3526 | 557 | if (refresh_Timer.read_ms() >= refresh_Time) { |
s1200058 | 19:cb3a4b4c3526 | 558 | refresh_Timer.reset(); |
s1200058 | 19:cb3a4b4c3526 | 559 | //print_gps(count); |
s1200058 | 19:cb3a4b4c3526 | 560 | Get_GPS(&myGPS); |
s1200058 | 19:cb3a4b4c3526 | 561 | //log++; |
s1200058 | 19:cb3a4b4c3526 | 562 | /* xbee.printf("%d times, x:%f, y:%f, speed:%d\n", log, cansat.get_robot_x(), cansat.get_robot_y(), cansat.get_speed()); |
s1200058 | 19:cb3a4b4c3526 | 563 | xbee.printf("moter command: %c\n", cansat.motor_command); |
s1200058 | 19:cb3a4b4c3526 | 564 | xbee.printf("robot_angle:%d, target_angle:%d, robot_compass:%f, %04.2f hPa\n",cansat.get_robot_angle(), cansat.get_target_angle(), cansat.get_compass_angle(), cansat.get_pressure()); |
s1200058 | 19:cb3a4b4c3526 | 565 | */ |
s1200058 | 19:cb3a4b4c3526 | 566 | } |
s1200058 | 19:cb3a4b4c3526 | 567 | if(compass_refresh_Timer.read_ms() >= compass_refresh_Time){ |
s1200058 | 19:cb3a4b4c3526 | 568 | Compass_intrpt(); |
s1200058 | 19:cb3a4b4c3526 | 569 | compass_refresh_Timer.reset(); |
s1200058 | 19:cb3a4b4c3526 | 570 | } |
s1200058 | 14:4dfeeca65308 | 571 | |
kityann | 0:1fcc61be1dcf | 572 | switch(mode){ |
kityann | 0:1fcc61be1dcf | 573 | //スタートモード:パラシュートが開くまではこのモードを実行 |
kityann | 0:1fcc61be1dcf | 574 | case -1: |
kityann | 0:1fcc61be1dcf | 575 | standby(); |
kityann | 0:1fcc61be1dcf | 576 | break; |
kityann | 0:1fcc61be1dcf | 577 | //落下モード:落下時はこのモード。気圧計または、時間でロボットとパラシュートを分離する |
kityann | 0:1fcc61be1dcf | 578 | case 1: |
kityann | 0:1fcc61be1dcf | 579 | falling(); |
kityann | 0:1fcc61be1dcf | 580 | break; |
kityann | 0:1fcc61be1dcf | 581 | //走行モード:ターゲットにむかって走行を行う |
kityann | 0:1fcc61be1dcf | 582 | case 2: |
s1200058 | 14:4dfeeca65308 | 583 | if (running_Timer.read_ms() >= running_Time) { |
s1200058 | 14:4dfeeca65308 | 584 | running_Timer.reset(); |
s1200058 | 14:4dfeeca65308 | 585 | running(); |
s1200058 | 14:4dfeeca65308 | 586 | } |
kityann | 0:1fcc61be1dcf | 587 | break; |
kityann | 0:1fcc61be1dcf | 588 | //停止モード:ターゲット |
kityann | 0:1fcc61be1dcf | 589 | case 100: |
kityann | 0:1fcc61be1dcf | 590 | stopping(); |
kityann | 0:1fcc61be1dcf | 591 | break; |
kityann | 0:1fcc61be1dcf | 592 | } |
s1210160 | 10:ce253d8a5f2c | 593 | |
s1200058 | 11:19091694455e | 594 | /* while(1){ |
s1210160 | 10:ce253d8a5f2c | 595 | |
s1210160 | 10:ce253d8a5f2c | 596 | printf("compass x : %i, compass y : %i, compass z : %i\n", raw[0], raw[1], raw[2]); |
s1210160 | 10:ce253d8a5f2c | 597 | printf("set compass x : %i, set compass y : %i, set compass z : %i\n", cansat.get_compass_x(), cansat.get_compass_y(), cansat.get_compass_z()); |
s1210160 | 10:ce253d8a5f2c | 598 | printf("compass angle : %f\n", headingLPF); |
s1210160 | 10:ce253d8a5f2c | 599 | printf("set compass angle : %f\n", cansat.get_compass_angle()); |
s1210160 | 10:ce253d8a5f2c | 600 | printf("robot angle : %d\n", calc_angle(headingLPF)); |
s1210160 | 10:ce253d8a5f2c | 601 | printf("set robot angle : %d\n", cansat.get_robot_angle()); |
s1210160 | 10:ce253d8a5f2c | 602 | } |
s1200058 | 11:19091694455e | 603 | */ |
s1200058 | 19:cb3a4b4c3526 | 604 | |
kityann | 0:1fcc61be1dcf | 605 | } |
kityann | 0:1fcc61be1dcf | 606 | |
kityann | 0:1fcc61be1dcf | 607 | } |