161007_BDK_EEPROM(M)
Dependencies: mbed
Fork of 161006_BDK_SPIslave3 by
main.cpp@7:45b16ef560a9, 2016-10-07 (annotated)
- Committer:
- bcup
- Date:
- Fri Oct 07 08:15:21 2016 +0000
- Branch:
- KSS
- Revision:
- 7:45b16ef560a9
- Parent:
- 6:21b3128fbaef
161007_BDK_EEPROM(M)
Who changed what in which revision?
User | Revision | Line number | New contents of line |
---|---|---|---|
bcup | 0:24e90e3ca3f4 | 1 | #include "mbed.h" |
bcup | 0:24e90e3ca3f4 | 2 | |
bcup | 0:24e90e3ca3f4 | 3 | #define DEBUG_SPI |
bcup | 0:24e90e3ca3f4 | 4 | |
bcup | 0:24e90e3ca3f4 | 5 | #ifdef DEBUG_SPI |
bcup | 0:24e90e3ca3f4 | 6 | #define PRINTD(arg1,arg2...) printf(arg1,##arg2) |
bcup | 0:24e90e3ca3f4 | 7 | #endif |
bcup | 0:24e90e3ca3f4 | 8 | |
gandol2 | 3:4bb95aa46ebc | 9 | |
gandol2 | 3:4bb95aa46ebc | 10 | #define SPI_MOSI PA_7 |
gandol2 | 3:4bb95aa46ebc | 11 | #define SPI_MISO PA_6 |
gandol2 | 3:4bb95aa46ebc | 12 | #define SPI_SCLK PA_5 |
gandol2 | 3:4bb95aa46ebc | 13 | #define SPI_SSEL PA_4 |
gandol2 | 3:4bb95aa46ebc | 14 | |
gandol2 | 6:21b3128fbaef | 15 | #define EEPROM_WREN 0x06 // Write Enable |
gandol2 | 6:21b3128fbaef | 16 | #define EEPROM_WRDI 0x04 // Write Disable |
gandol2 | 6:21b3128fbaef | 17 | #define EEPROM_RDSR 0x05 // Read Status Register |
gandol2 | 6:21b3128fbaef | 18 | #define EEPROM_WRSR 0x01 // Write Status Register |
gandol2 | 6:21b3128fbaef | 19 | #define EEPROM_READ 0x03 // Read EEPROM Memory |
gandol2 | 6:21b3128fbaef | 20 | #define EEPROM_WRITE 0x02 // Write EEPROM Memory |
bcup | 7:45b16ef560a9 | 21 | #define EEPROM_MULTIREAD 0x07 // Read Multibyte EEPROM Memory |
gandol2 | 3:4bb95aa46ebc | 22 | |
gandol2 | 3:4bb95aa46ebc | 23 | SPISlave spi_slave(SPI_MOSI, SPI_MISO, SPI_SCLK, SPI_SSEL); // MOSI, MISO, SCLK(CLK), SSEL(CS)=NC |
gandol2 | 3:4bb95aa46ebc | 24 | Serial pc_serial(USBTX, USBRX); |
bcup | 0:24e90e3ca3f4 | 25 | |
bcup | 2:5311ad7c83e6 | 26 | void SPI_SlaveInit() |
bcup | 0:24e90e3ca3f4 | 27 | { |
bcup | 2:5311ad7c83e6 | 28 | PRINTD("Set the SPI SLAVE format\n"); |
gandol2 | 3:4bb95aa46ebc | 29 | spi_slave.format(8,0); // setup 8bit 0 mode |
bcup | 2:5311ad7c83e6 | 30 | PRINTD("Set the SPI SLAVE frequency\n"); |
bcup | 7:45b16ef560a9 | 31 | //spi_slave.frequency(50000000); // default 1MHz |
bcup | 7:45b16ef560a9 | 32 | spi_slave.frequency(1000000); |
bcup | 0:24e90e3ca3f4 | 33 | } |
bcup | 0:24e90e3ca3f4 | 34 | |
bcup | 2:5311ad7c83e6 | 35 | void SPI_SlaveWrite() |
bcup | 0:24e90e3ca3f4 | 36 | { |
bcup | 2:5311ad7c83e6 | 37 | char tx_buffer[255]={0}; |
bcup | 2:5311ad7c83e6 | 38 | char reply; |
bcup | 2:5311ad7c83e6 | 39 | char i; |
bcup | 1:3a338e553a54 | 40 | char temp; |
bcup | 2:5311ad7c83e6 | 41 | char tx_cnt = 0; |
bcup | 2:5311ad7c83e6 | 42 | int value; |
bcup | 2:5311ad7c83e6 | 43 | PRINTD("Input Strging="); |
bcup | 0:24e90e3ca3f4 | 44 | while(1) |
bcup | 0:24e90e3ca3f4 | 45 | { |
bcup | 0:24e90e3ca3f4 | 46 | |
bcup | 0:24e90e3ca3f4 | 47 | temp=getchar(); |
bcup | 2:5311ad7c83e6 | 48 | tx_buffer[tx_cnt++]=temp; |
bcup | 0:24e90e3ca3f4 | 49 | if(temp==0x0d) |
bcup | 0:24e90e3ca3f4 | 50 | { |
bcup | 0:24e90e3ca3f4 | 51 | tx_buffer[tx_cnt]=0; |
bcup | 0:24e90e3ca3f4 | 52 | PRINTD("\nData send Finish...\n"); |
bcup | 0:24e90e3ca3f4 | 53 | for(i=0;i<=tx_cnt;++i) |
bcup | 0:24e90e3ca3f4 | 54 | { |
bcup | 0:24e90e3ca3f4 | 55 | PRINTD("%c[%02x]",tx_buffer[i],tx_buffer[i]); |
bcup | 0:24e90e3ca3f4 | 56 | } |
bcup | 0:24e90e3ca3f4 | 57 | PRINTD("\n\n"); |
bcup | 0:24e90e3ca3f4 | 58 | for(i=0;i<=tx_cnt;++i) |
bcup | 0:24e90e3ca3f4 | 59 | { |
bcup | 0:24e90e3ca3f4 | 60 | value=tx_buffer[i]; |
bcup | 2:5311ad7c83e6 | 61 | PRINTD("write[%d]=%c[%02x]\n",i,value,value); |
gandol2 | 3:4bb95aa46ebc | 62 | spi_slave.reply(value); |
bcup | 0:24e90e3ca3f4 | 63 | } |
bcup | 2:5311ad7c83e6 | 64 | for(i=0;i<tx_cnt;++i) |
bcup | 0:24e90e3ca3f4 | 65 | { |
bcup | 0:24e90e3ca3f4 | 66 | tx_buffer[i]=0; |
bcup | 2:5311ad7c83e6 | 67 | PRINTD("init_tx_buf[%d]=%c\n",i,tx_buffer[i]); |
bcup | 0:24e90e3ca3f4 | 68 | } |
bcup | 2:5311ad7c83e6 | 69 | tx_cnt=0; |
bcup | 2:5311ad7c83e6 | 70 | PRINTD("break\n"); |
bcup | 2:5311ad7c83e6 | 71 | break; |
bcup | 0:24e90e3ca3f4 | 72 | } |
bcup | 0:24e90e3ca3f4 | 73 | else |
bcup | 0:24e90e3ca3f4 | 74 | { |
bcup | 0:24e90e3ca3f4 | 75 | PRINTD("%c[%02x]",tx_buffer[tx_cnt],tx_buffer[tx_cnt]); |
bcup | 0:24e90e3ca3f4 | 76 | } |
bcup | 0:24e90e3ca3f4 | 77 | } |
bcup | 2:5311ad7c83e6 | 78 | return; |
bcup | 0:24e90e3ca3f4 | 79 | } |
bcup | 0:24e90e3ca3f4 | 80 | |
gandol2 | 6:21b3128fbaef | 81 | void spi_dummy_reply(void) |
gandol2 | 6:21b3128fbaef | 82 | { |
gandol2 | 6:21b3128fbaef | 83 | spi_slave.reply( 0xA0 ); |
gandol2 | 6:21b3128fbaef | 84 | } |
gandol2 | 6:21b3128fbaef | 85 | |
gandol2 | 6:21b3128fbaef | 86 | #define EEPROM_SIZE 256 |
gandol2 | 6:21b3128fbaef | 87 | char statusReg; |
gandol2 | 6:21b3128fbaef | 88 | char eepBuf[EEPROM_SIZE]; |
gandol2 | 6:21b3128fbaef | 89 | |
gandol2 | 6:21b3128fbaef | 90 | void printBuf(char * buf, int length) |
gandol2 | 6:21b3128fbaef | 91 | { |
gandol2 | 6:21b3128fbaef | 92 | pc_serial.printf("=======================[EEPROM]========================\n"); |
gandol2 | 6:21b3128fbaef | 93 | pc_serial.printf(" |"); |
gandol2 | 6:21b3128fbaef | 94 | for(int iCnt = 0 ; iCnt < 16 ; ++iCnt) |
gandol2 | 6:21b3128fbaef | 95 | { |
gandol2 | 6:21b3128fbaef | 96 | pc_serial.printf("%02X|", iCnt); |
gandol2 | 6:21b3128fbaef | 97 | } |
gandol2 | 6:21b3128fbaef | 98 | pc_serial.printf("\n"); |
gandol2 | 6:21b3128fbaef | 99 | |
gandol2 | 6:21b3128fbaef | 100 | |
gandol2 | 6:21b3128fbaef | 101 | for(int iCnt = 0 ; iCnt < length ; ++iCnt) |
gandol2 | 6:21b3128fbaef | 102 | { |
gandol2 | 6:21b3128fbaef | 103 | if(0 == ((iCnt) % 16)) |
gandol2 | 6:21b3128fbaef | 104 | { |
gandol2 | 6:21b3128fbaef | 105 | pc_serial.printf("[0x%02X] ", iCnt); |
gandol2 | 6:21b3128fbaef | 106 | } |
gandol2 | 6:21b3128fbaef | 107 | |
gandol2 | 6:21b3128fbaef | 108 | pc_serial.printf("%02X ", *(buf + iCnt)); |
gandol2 | 6:21b3128fbaef | 109 | |
gandol2 | 6:21b3128fbaef | 110 | if(0 == ((iCnt+1) % 16)) |
gandol2 | 6:21b3128fbaef | 111 | { |
gandol2 | 6:21b3128fbaef | 112 | pc_serial.printf("\n"); |
gandol2 | 6:21b3128fbaef | 113 | |
gandol2 | 6:21b3128fbaef | 114 | } |
gandol2 | 6:21b3128fbaef | 115 | |
gandol2 | 6:21b3128fbaef | 116 | } |
gandol2 | 6:21b3128fbaef | 117 | pc_serial.printf("=======================================================\n"); |
gandol2 | 6:21b3128fbaef | 118 | } |
gandol2 | 6:21b3128fbaef | 119 | |
bcup | 0:24e90e3ca3f4 | 120 | int main() |
bcup | 0:24e90e3ca3f4 | 121 | { |
gandol2 | 6:21b3128fbaef | 122 | |
bcup | 7:45b16ef560a9 | 123 | char spiMulti = 0; |
bcup | 7:45b16ef560a9 | 124 | char eepAddr = 0; |
bcup | 7:45b16ef560a9 | 125 | char eepData = 0; |
bcup | 7:45b16ef560a9 | 126 | |
gandol2 | 3:4bb95aa46ebc | 127 | char serialTxReadyFlag = 0; |
gandol2 | 3:4bb95aa46ebc | 128 | int spiRxTempBuf = 0; |
gandol2 | 3:4bb95aa46ebc | 129 | char spiRxBuf[255]; |
gandol2 | 3:4bb95aa46ebc | 130 | int spiRxTempCnt = 0; |
gandol2 | 3:4bb95aa46ebc | 131 | int spiRxLen = 0; |
gandol2 | 3:4bb95aa46ebc | 132 | |
gandol2 | 3:4bb95aa46ebc | 133 | |
gandol2 | 3:4bb95aa46ebc | 134 | int spiTxCnt = 0; |
gandol2 | 3:4bb95aa46ebc | 135 | char spiTxReadyFlag = 0; |
gandol2 | 3:4bb95aa46ebc | 136 | |
gandol2 | 3:4bb95aa46ebc | 137 | char serialRxBuf[255]; |
gandol2 | 3:4bb95aa46ebc | 138 | int serialRxLen = 0; |
gandol2 | 3:4bb95aa46ebc | 139 | |
gandol2 | 3:4bb95aa46ebc | 140 | SPI_SlaveInit(); |
gandol2 | 6:21b3128fbaef | 141 | |
bcup | 7:45b16ef560a9 | 142 | /* |
gandol2 | 6:21b3128fbaef | 143 | NVIC_SetVector( SPI_IRQn , ( uint32_t ) executa_spi_slave_hw ) ; |
gandol2 | 6:21b3128fbaef | 144 | NVIC_SetPriority( SPI_IRQn , 2 ) ; |
gandol2 | 6:21b3128fbaef | 145 | NVIC_EnableIRQ( SPI_IRQn ) ; |
bcup | 7:45b16ef560a9 | 146 | */ |
gandol2 | 3:4bb95aa46ebc | 147 | |
gandol2 | 3:4bb95aa46ebc | 148 | |
gandol2 | 5:1ccdbfe5e4bb | 149 | pc_serial.printf("\n\n========== KSS SPI Slave2 [Start] ==========\n"); |
gandol2 | 3:4bb95aa46ebc | 150 | |
gandol2 | 3:4bb95aa46ebc | 151 | while(1) |
gandol2 | 3:4bb95aa46ebc | 152 | { |
gandol2 | 3:4bb95aa46ebc | 153 | if(spi_slave.receive()) // wait SPI data input... |
gandol2 | 3:4bb95aa46ebc | 154 | { |
gandol2 | 3:4bb95aa46ebc | 155 | spiRxTempBuf = spi_slave.read(); |
gandol2 | 6:21b3128fbaef | 156 | //spi_slave.reply( statusReg++ ); |
gandol2 | 6:21b3128fbaef | 157 | //continue; |
gandol2 | 6:21b3128fbaef | 158 | |
gandol2 | 6:21b3128fbaef | 159 | switch(spiRxTempBuf) |
gandol2 | 6:21b3128fbaef | 160 | { |
gandol2 | 6:21b3128fbaef | 161 | case EEPROM_WREN: |
gandol2 | 6:21b3128fbaef | 162 | //spi_dummy_reply(); |
gandol2 | 6:21b3128fbaef | 163 | pc_serial.printf("[INFO] SPI_MOSI(RX) : WREN\n"); |
gandol2 | 6:21b3128fbaef | 164 | statusReg = statusReg | (1<<1) ; |
gandol2 | 6:21b3128fbaef | 165 | pc_serial.printf("[INFO] WREN sucess [0x%02X]\n", statusReg); |
gandol2 | 6:21b3128fbaef | 166 | break; |
gandol2 | 6:21b3128fbaef | 167 | |
gandol2 | 6:21b3128fbaef | 168 | case EEPROM_WRDI: |
gandol2 | 6:21b3128fbaef | 169 | //spi_dummy_reply(); |
gandol2 | 6:21b3128fbaef | 170 | pc_serial.printf("[INFO] SPI_MOSI(RX) : WRDI\n"); |
gandol2 | 6:21b3128fbaef | 171 | statusReg = statusReg & (~(1 << 1)) ; |
gandol2 | 6:21b3128fbaef | 172 | pc_serial.printf("[INFO] WRDI sucess [0x%02X]\n", statusReg); |
gandol2 | 6:21b3128fbaef | 173 | break; |
gandol2 | 6:21b3128fbaef | 174 | |
gandol2 | 6:21b3128fbaef | 175 | case EEPROM_RDSR: |
gandol2 | 6:21b3128fbaef | 176 | spi_slave.reply( statusReg ); |
gandol2 | 6:21b3128fbaef | 177 | pc_serial.printf("[INFO] SPI_MOSI(RX) : RDSR\n"); |
gandol2 | 6:21b3128fbaef | 178 | pc_serial.printf("[INFO] SPI_MISO(TX) : RDSR[0x%02X] \n", statusReg); |
gandol2 | 6:21b3128fbaef | 179 | break; |
gandol2 | 6:21b3128fbaef | 180 | |
gandol2 | 6:21b3128fbaef | 181 | |
gandol2 | 6:21b3128fbaef | 182 | case EEPROM_WRITE: |
gandol2 | 6:21b3128fbaef | 183 | // EEPROM Address read.. |
gandol2 | 6:21b3128fbaef | 184 | while(!spi_slave.receive()); |
gandol2 | 6:21b3128fbaef | 185 | eepAddr = spi_slave.read(); |
gandol2 | 6:21b3128fbaef | 186 | |
gandol2 | 6:21b3128fbaef | 187 | // EEPROM Data read.. |
gandol2 | 6:21b3128fbaef | 188 | while(!spi_slave.receive()); |
gandol2 | 6:21b3128fbaef | 189 | eepData = spi_slave.read(); |
gandol2 | 6:21b3128fbaef | 190 | |
gandol2 | 6:21b3128fbaef | 191 | pc_serial.printf("\n[DEBUG] Addr[0x%02X] Data[0x%02X] \n", eepAddr, eepData); |
gandol2 | 6:21b3128fbaef | 192 | |
gandol2 | 6:21b3128fbaef | 193 | if(statusReg & 0x02) |
gandol2 | 6:21b3128fbaef | 194 | { |
gandol2 | 6:21b3128fbaef | 195 | statusReg |= 0x01; |
gandol2 | 6:21b3128fbaef | 196 | eepBuf[eepAddr] = eepData; |
gandol2 | 6:21b3128fbaef | 197 | printBuf(eepBuf, EEPROM_SIZE); |
gandol2 | 6:21b3128fbaef | 198 | statusReg &= (~0x01); |
gandol2 | 6:21b3128fbaef | 199 | |
gandol2 | 6:21b3128fbaef | 200 | } |
gandol2 | 6:21b3128fbaef | 201 | else |
gandol2 | 6:21b3128fbaef | 202 | { |
gandol2 | 6:21b3128fbaef | 203 | pc_serial.printf("\nwrite command is disabled\n"); |
gandol2 | 6:21b3128fbaef | 204 | } |
gandol2 | 6:21b3128fbaef | 205 | break; |
gandol2 | 6:21b3128fbaef | 206 | |
gandol2 | 6:21b3128fbaef | 207 | |
gandol2 | 6:21b3128fbaef | 208 | case EEPROM_READ: |
gandol2 | 6:21b3128fbaef | 209 | // EEPROM Address read.. |
gandol2 | 6:21b3128fbaef | 210 | while(!spi_slave.receive()); |
gandol2 | 6:21b3128fbaef | 211 | eepAddr = spi_slave.read(); |
gandol2 | 6:21b3128fbaef | 212 | |
gandol2 | 6:21b3128fbaef | 213 | spi_slave.reply( eepBuf[eepAddr] ); |
gandol2 | 6:21b3128fbaef | 214 | |
gandol2 | 6:21b3128fbaef | 215 | pc_serial.printf("\n[DEBUG] Addr[0x%02X]\n", eepAddr); |
gandol2 | 6:21b3128fbaef | 216 | |
gandol2 | 6:21b3128fbaef | 217 | |
gandol2 | 6:21b3128fbaef | 218 | |
gandol2 | 6:21b3128fbaef | 219 | |
gandol2 | 6:21b3128fbaef | 220 | break; |
gandol2 | 6:21b3128fbaef | 221 | |
gandol2 | 6:21b3128fbaef | 222 | |
bcup | 7:45b16ef560a9 | 223 | case EEPROM_MULTIREAD: |
bcup | 7:45b16ef560a9 | 224 | // EEPROM_MULTIREAD.. |
bcup | 7:45b16ef560a9 | 225 | while(!spi_slave.receive()); |
bcup | 7:45b16ef560a9 | 226 | eepAddr = spi_slave.read(); |
bcup | 7:45b16ef560a9 | 227 | printf("[DEBUG] [M to S] eepAddr=0x%02x\n",eepAddr++); |
bcup | 7:45b16ef560a9 | 228 | //printf("[DEBUG] [M to S] eepAddr=0x%02x\n",eepAddr); |
bcup | 7:45b16ef560a9 | 229 | for(int i=0;i<7;i++) |
bcup | 7:45b16ef560a9 | 230 | { |
bcup | 7:45b16ef560a9 | 231 | //spi_slave.reply( eepBuf[eepAddr] ); |
bcup | 7:45b16ef560a9 | 232 | spi_slave.reply( i ); |
bcup | 7:45b16ef560a9 | 233 | //++eepAddr; |
bcup | 7:45b16ef560a9 | 234 | //printf("[0x%02x] ",spiMulti); |
bcup | 7:45b16ef560a9 | 235 | pc_serial.printf("."); |
bcup | 7:45b16ef560a9 | 236 | |
bcup | 7:45b16ef560a9 | 237 | } |
bcup | 7:45b16ef560a9 | 238 | pc_serial.printf("\n"); |
bcup | 7:45b16ef560a9 | 239 | break; |
bcup | 7:45b16ef560a9 | 240 | |
bcup | 7:45b16ef560a9 | 241 | |
gandol2 | 6:21b3128fbaef | 242 | default: |
gandol2 | 6:21b3128fbaef | 243 | //spi_dummy_reply(); |
gandol2 | 6:21b3128fbaef | 244 | } |
gandol2 | 6:21b3128fbaef | 245 | |
gandol2 | 6:21b3128fbaef | 246 | //pc_serial.printf("------------------------ end SPI Communication\n"); |
gandol2 | 6:21b3128fbaef | 247 | |
gandol2 | 6:21b3128fbaef | 248 | } |
gandol2 | 6:21b3128fbaef | 249 | } |
gandol2 | 6:21b3128fbaef | 250 | |
gandol2 | 6:21b3128fbaef | 251 | |
gandol2 | 6:21b3128fbaef | 252 | |
gandol2 | 6:21b3128fbaef | 253 | |
gandol2 | 6:21b3128fbaef | 254 | |
gandol2 | 6:21b3128fbaef | 255 | |
gandol2 | 6:21b3128fbaef | 256 | |
gandol2 | 6:21b3128fbaef | 257 | |
gandol2 | 6:21b3128fbaef | 258 | |
gandol2 | 6:21b3128fbaef | 259 | |
gandol2 | 6:21b3128fbaef | 260 | /* |
gandol2 | 3:4bb95aa46ebc | 261 | spiRxBuf[spiRxTempCnt++] = spiRxTempBuf; |
gandol2 | 3:4bb95aa46ebc | 262 | |
gandol2 | 3:4bb95aa46ebc | 263 | if(0x00 == spiRxTempBuf) |
gandol2 | 3:4bb95aa46ebc | 264 | { |
gandol2 | 3:4bb95aa46ebc | 265 | serialTxReadyFlag = 1; |
gandol2 | 3:4bb95aa46ebc | 266 | //pc_serial.printf("SPI Recive Byte [%d]\n", spiRxTempCnt-1); |
gandol2 | 3:4bb95aa46ebc | 267 | spiRxLen = strlen(spiRxBuf); |
gandol2 | 3:4bb95aa46ebc | 268 | spiRxTempCnt = 0; |
gandol2 | 3:4bb95aa46ebc | 269 | } |
gandol2 | 6:21b3128fbaef | 270 | |
gandol2 | 3:4bb95aa46ebc | 271 | } |
gandol2 | 3:4bb95aa46ebc | 272 | if(1 == serialTxReadyFlag) |
gandol2 | 3:4bb95aa46ebc | 273 | { |
gandol2 | 3:4bb95aa46ebc | 274 | serialTxReadyFlag = 0; |
gandol2 | 6:21b3128fbaef | 275 | pc_serial.printf("SPI_RX Data : len=[%d] %s\n", spiRxLen, spiRxBuf); |
gandol2 | 3:4bb95aa46ebc | 276 | } |
gandol2 | 3:4bb95aa46ebc | 277 | |
gandol2 | 6:21b3128fbaef | 278 | */ |
gandol2 | 6:21b3128fbaef | 279 | |
gandol2 | 3:4bb95aa46ebc | 280 | |
gandol2 | 3:4bb95aa46ebc | 281 | |
gandol2 | 6:21b3128fbaef | 282 | #if 0 |
bcup | 4:cc97d7a33efc | 283 | /* TODO "serial -> slave ----(SPI)-----> " */ |
gandol2 | 3:4bb95aa46ebc | 284 | |
gandol2 | 3:4bb95aa46ebc | 285 | if(0 != pc_serial.readable()) // wait serial input.. |
gandol2 | 3:4bb95aa46ebc | 286 | { |
gandol2 | 3:4bb95aa46ebc | 287 | pc_serial.scanf("%s", serialRxBuf); |
gandol2 | 3:4bb95aa46ebc | 288 | serialRxLen = strlen(serialRxBuf); |
gandol2 | 3:4bb95aa46ebc | 289 | pc_serial.printf("len=[%d] %s\n", serialRxLen, serialRxBuf); |
gandol2 | 3:4bb95aa46ebc | 290 | spiTxReadyFlag = 1; |
gandol2 | 3:4bb95aa46ebc | 291 | } |
gandol2 | 3:4bb95aa46ebc | 292 | if(1 == spiTxReadyFlag) |
gandol2 | 3:4bb95aa46ebc | 293 | { |
bcup | 4:cc97d7a33efc | 294 | PRINTD("spiTxReadyFlag=%d\n",spiTxReadyFlag); |
gandol2 | 3:4bb95aa46ebc | 295 | // SPI Send Start |
gandol2 | 3:4bb95aa46ebc | 296 | |
gandol2 | 6:21b3128fbaef | 297 | |
gandol2 | 3:4bb95aa46ebc | 298 | for(spiTxCnt = 0 ; spiTxCnt < serialRxLen + 1 ; ++spiTxCnt) |
gandol2 | 3:4bb95aa46ebc | 299 | { |
gandol2 | 3:4bb95aa46ebc | 300 | //printf("send Cnt[%d] [0x%02X]\n", spiTxCnt, serialRxBuf[spiTxCnt]); |
gandol2 | 3:4bb95aa46ebc | 301 | spi_slave.reply(serialRxBuf[spiTxCnt]); |
bcup | 4:cc97d7a33efc | 302 | } |
gandol2 | 6:21b3128fbaef | 303 | |
bcup | 4:cc97d7a33efc | 304 | for(spiTxCnt = 0 ; spiTxCnt < 1 ; ++spiTxCnt) |
bcup | 4:cc97d7a33efc | 305 | { |
bcup | 4:cc97d7a33efc | 306 | //printf("send Cnt[%d] [0x%02X]\n", spiTxCnt, serialRxBuf[spiTxCnt]); |
bcup | 4:cc97d7a33efc | 307 | |
bcup | 4:cc97d7a33efc | 308 | spi_slave.reply(serialRxBuf[spiTxCnt]); |
bcup | 4:cc97d7a33efc | 309 | PRINTD("reply=%c\n",serialRxBuf[spiTxCnt]); |
bcup | 4:cc97d7a33efc | 310 | } |
gandol2 | 3:4bb95aa46ebc | 311 | |
gandol2 | 3:4bb95aa46ebc | 312 | |
gandol2 | 3:4bb95aa46ebc | 313 | spiTxReadyFlag = 0; |
bcup | 4:cc97d7a33efc | 314 | PRINTD("spiTxReadyFlag =0\n"); |
gandol2 | 3:4bb95aa46ebc | 315 | } |
gandol2 | 6:21b3128fbaef | 316 | #endif |
bcup | 4:cc97d7a33efc | 317 | |
gandol2 | 3:4bb95aa46ebc | 318 | |
gandol2 | 3:4bb95aa46ebc | 319 | |
gandol2 | 3:4bb95aa46ebc | 320 | |
gandol2 | 3:4bb95aa46ebc | 321 | |
gandol2 | 3:4bb95aa46ebc | 322 | #if 0 // 161005_BDK_slave backup start |
bcup | 2:5311ad7c83e6 | 323 | int i; |
bcup | 2:5311ad7c83e6 | 324 | char valueFromMaster; |
bcup | 2:5311ad7c83e6 | 325 | char rx_buffer[255]={0}; |
bcup | 2:5311ad7c83e6 | 326 | char rx_cnt = -1; |
bcup | 2:5311ad7c83e6 | 327 | PRINTD("\n=========SLAVE=========\n"); |
bcup | 2:5311ad7c83e6 | 328 | SPI_SlaveInit(); |
bcup | 2:5311ad7c83e6 | 329 | |
bcup | 0:24e90e3ca3f4 | 330 | while(1) |
bcup | 0:24e90e3ca3f4 | 331 | { |
bcup | 2:5311ad7c83e6 | 332 | |
gandol2 | 3:4bb95aa46ebc | 333 | if(spi_slave.receive()) |
bcup | 2:5311ad7c83e6 | 334 | { |
bcup | 2:5311ad7c83e6 | 335 | PRINTD("----1\n"); |
bcup | 2:5311ad7c83e6 | 336 | if(pc.readable()) |
bcup | 2:5311ad7c83e6 | 337 | { |
bcup | 2:5311ad7c83e6 | 338 | SPI_SlaveWrite(); |
bcup | 2:5311ad7c83e6 | 339 | } |
bcup | 2:5311ad7c83e6 | 340 | PRINTD("----2\n"); |
gandol2 | 3:4bb95aa46ebc | 341 | valueFromMaster = spi_slave.read(); |
bcup | 2:5311ad7c83e6 | 342 | PRINTD("----3\n"); |
bcup | 2:5311ad7c83e6 | 343 | //PRINTD("valueFromMaster="); |
bcup | 2:5311ad7c83e6 | 344 | //PRINTD("[%c]%x\n",valueFromMaster,valueFromMaster); |
bcup | 2:5311ad7c83e6 | 345 | rx_buffer[++rx_cnt]=valueFromMaster; |
bcup | 2:5311ad7c83e6 | 346 | if(valueFromMaster==0) |
bcup | 2:5311ad7c83e6 | 347 | { |
bcup | 2:5311ad7c83e6 | 348 | PRINTD("rx_string="); |
bcup | 2:5311ad7c83e6 | 349 | for(i=0;i<rx_cnt;i++) |
bcup | 2:5311ad7c83e6 | 350 | { |
bcup | 2:5311ad7c83e6 | 351 | PRINTD("%c",rx_buffer[i]); |
bcup | 2:5311ad7c83e6 | 352 | } |
bcup | 2:5311ad7c83e6 | 353 | PRINTD("\n"); |
bcup | 2:5311ad7c83e6 | 354 | for(i=0;i<=rx_cnt;i++) |
bcup | 2:5311ad7c83e6 | 355 | { |
bcup | 2:5311ad7c83e6 | 356 | rx_buffer[i]=0; |
bcup | 2:5311ad7c83e6 | 357 | PRINTD("Init_rx_buf[%d]=%c\n",i,rx_buffer[i]); |
bcup | 2:5311ad7c83e6 | 358 | } |
bcup | 2:5311ad7c83e6 | 359 | rx_cnt=-1; |
bcup | 2:5311ad7c83e6 | 360 | |
bcup | 2:5311ad7c83e6 | 361 | }//valueFromMaster if |
bcup | 2:5311ad7c83e6 | 362 | |
gandol2 | 3:4bb95aa46ebc | 363 | }// spi_slave.receive() if |
bcup | 2:5311ad7c83e6 | 364 | /* |
bcup | 2:5311ad7c83e6 | 365 | |
bcup | 2:5311ad7c83e6 | 366 | */ |
bcup | 2:5311ad7c83e6 | 367 | }//end of while |
gandol2 | 3:4bb95aa46ebc | 368 | #endif // 161005_BDK_slave backup end |
bcup | 2:5311ad7c83e6 | 369 | }//end of main |