Diff: main.cpp

Revision:

21:2fa676f214fe

Parent:

15:002bac432234

Child:

22:9350752f5414

--- a/main.cpp	Thu Jun 05 19:03:42 2014 +0000
+++ b/main.cpp	Sat Jun 07 07:12:25 2014 +0000
@@ -10,17 +10,20 @@
 #include "debug.h"
 #include "SystemTime.h"
 #include "sync.h"
+#include "pins.h"
+//#include "DS3231.h"
 
 // Capture button stuff
 #define PIN_DETECT_SAMPLE_PERIOD_uS 20000   // 20 ms sample period
 #define SYNC_HELD_SAMPLES   (SYNC_HOLD_TIME_MS * 1000 / PIN_DETECT_SAMPLE_PERIOD_uS)
 
 #ifdef USE_OLED
-// Display
-SPI spi0(P0_9, NC, P0_10); // mosi, miso, sclk
-Adafruit_SSD1306 oled(spi0, P0_11, P0_12, P0_13); // DC, RST, CS
+    SPI spi0(P0_9, NC, P0_10); // mosi, miso, sclk
+    Adafruit_SSD1306 oled(spi0, P0_11, P0_12, P0_13); // DC, RST, CS
 #endif
 
+// DS3231 rtc(I2C_SDA, I2C_SCL);
+
 // Mode button
 PinDetect captureButton(P0_16, PullUp);
 
@@ -28,6 +31,8 @@
 enum state {IDLE, CAPTURE, SYNC};
 enum state State;
 
+Timer captureTimer;
+
 // This is used to ensure the rising edge after a hold is ignored
 bool ignore_edge = false;
 void buttonHeld() {
@@ -84,34 +89,35 @@
             OLED_CLEAR();
             OLED_PRINTP("Capturing data...", 0, 0);
             
-            
+            captureTimer.start();
             while (State == CAPTURE) {
                 data = receive_data();
-                log_data(data);
+                log_data(captureTimer.read_ms(), data);
+
                 int split;
-                if (process_data(data->y, &split)) {
-                    PC_PRINTLNF("Split time: %d", split);
+                if (process_data((int) (data->x), (int) (data->y), &split)) {
+                    PC_PRINTLNF("Peak time: %d", split);
                     
                     int min = split / 60000;
                     int sec = (split / 1000) % 60;
                     int hund = (split / 10) % 100;
                     
-                    OLED_PRINTPF("%1d", min, 0, 40);
-                    OLED_PRINTPF("%02d", sec, 5, 40);
-                    oled.drawPixel(14, 44, 0x1);
-                    OLED_PRINTPF("%02d", hund, 15, 40);
-                    log_data(split);
+//                    OLED_PRINTPF("%1d", min, 0, 40);
+//                    OLED_PRINTPF("%02d", sec, 5, 40);
+//                    OLED_DRAWPIXEL(14, 44, 0x1);
+//                    OLED_PRINTPF("%02d", hund, 15, 40);
+                    log_data(captureTimer.read_ms(), split);
                 }
             }
-            
+            captureTimer.stop();
+            captureTimer.reset();
             receive_close();
             process_close();
             log_close();
         } else if (State == SYNC) {
             OLED_PRINTP("Ready to sync...", 0, 0);
             sync_init();
-            while (State == SYNC)
-                sync();
+            sync();
         }
     }
 }