File content as of revision 41:a71d06f292ac:

#include "main.h"

#define SIZE_FIFO 50


CAN can(PB_8,PB_9,1000000); // Rx&Tx pour le CAN

Serial pc(USBTX,USBRX);

CANMessage msgRxBuffer[SIZE_FIFO];
unsigned char FIFO_ecriture=0; //Position du fifo pour la reception CAN
signed char FIFO_lecture=0;//Position du fifo de lecture des messages CAN
unsigned char EtatGameEnd=0;

char cote;


void canProcessRx(void);


/*********************************************************************************************/
/* FUNCTION NAME: canRx_ISR                                                                  */
/* DESCRIPTION  : lit les messages sur le can et les stocke dans la FIFO                     */
/*********************************************************************************************/
void canRx_ISR (void)
{
    if (can.read(msgRxBuffer[FIFO_ecriture])) {
        if (msgRxBuffer[FIFO_ecriture].id==GLOBAL_GAME_END) {

        }
        FIFO_ecriture=(FIFO_ecriture+1)%SIZE_FIFO;

    }

}

int main()
{
    can.attach(&canRx_ISR); // création de l'interrupt attachée à la réception sur le CAN
    servo_interrupt_en(); //permettre les interuptions

    wait(1);//attente servo boot


#ifdef ROBOT_SMALL
    pc.printf("\nPetit robot\n\n");
    deverouillage_torque();
#endif



#ifdef ROBOT_BIG
    pc.printf("\nGros robot\n\n");
    deverouillage_torque();
    positionControl(doigt,384,100,BLED_ON,2);
    wait(0.5);
#endif

    gabarit_robot();


    pc.printf("\nLAUNCHED");
    while(1) {
        canProcessRx();
        f_mesure();//dt35


#ifdef ROBOT_SMALL
        automate_ventouse_presentoir_arriere();
        automate_ventouse_presentoir_avant();

        automate_ventouse_goldenium_arriere();
        automate_ventouse_goldenium_avant();

        automate_ventouse_sol_avant();
        automate_ventouse_sol_arriere();

        automate_ventouse_balance_avant();
        automate_ventouse_balance_arriere();

        automate_ventouse_relache_arriere();
        automate_ventouse_relache_avant();

        automate_ventouse_sol_avant_relache();
        automate_ventouse_sol_arriere_relache();

        automate_ventouse_accelerateur_arriere();
        automate_ventouse_accelerateur_avant();
#endif

#ifdef ROBOT_BIG
        automate_ventouse_presentoir_avant();
        automate_ventouse_goldenium_avant();
        automate_ventouse_relache_avant();
        automate_ventouse_accelerateur_avant();

        fifo_couleur();
        ascenseur();
        convoyeur_gauche();
        convoyeur_droit();

#endif

        if(EtatGameEnd==1) {
            while(1);
        }

    }
}

/****************************************************************************************/
/* FUNCTION NAME: canProcessRx                                                          */
/* DESCRIPTION  : Fonction de traitement des messages CAN                               */
/****************************************************************************************/
void canProcessRx(void)
{
    static signed char FIFO_occupation=0,FIFO_max_occupation=0;
    CANMessage msgTx=CANMessage();
    FIFO_occupation=FIFO_ecriture-FIFO_lecture;
    if(FIFO_occupation<0)
        FIFO_occupation=FIFO_occupation+SIZE_FIFO;
    if(FIFO_max_occupation<FIFO_occupation)
        FIFO_max_occupation=FIFO_occupation;
    if(FIFO_occupation!=0) {
        int identifiant=msgRxBuffer[FIFO_lecture].id;

        switch(identifiant) {


            case CHOICE_COLOR:
                cote = msgRxBuffer[FIFO_lecture].data[0];
                /*SendMsgCan(0x788, (unsigned char*)&cote, 1);
                if(cote) printf("\nCote violet : %d",cote);
                else printf("\nCote jaune : %d", cote);*/
                break;

            case GLOBAL_GAME_END:
                EtatGameEnd = 1;
                break;

            case DATA_TELEMETRE: //Lit le telemetre N°X suivant la data dans le CAN
                char numero_telemetre=msgRxBuffer[FIFO_lecture].data[0];
                short distance=lecture_telemetre(numero_telemetre);


                msgTx.id=RECEPTION_DATA; // tx Valeur Telemetre1
                msgTx.len=2;
                msgTx.format=CANStandard;
                msgTx.type=CANData;
                // Rayon sur 2 octets
                msgTx.data[0]=(unsigned char)distance;
                msgTx.data[1]=(unsigned char)(distance>>8);

                can.write(msgTx);
                SendAck(ACKNOWLEDGE_TELEMETRE,RECEPTION_DATA);
                break;

            case DATA_RECALAGE:
                short distance1=lecture_telemetre(1);
                short distance2=lecture_telemetre(2);
                short distance3=lecture_telemetre(3);
                short distance4=lecture_telemetre(4);

                msgTx.id=RECEPTION_RECALAGE; // tx Valeur Telemetre1
                msgTx.len=8;
                msgTx.format=CANStandard;
                msgTx.type=CANData;
                // Rayon sur 2 octets
                msgTx.data[0]=(unsigned char)distance1;
                msgTx.data[1]=(unsigned char)(distance1>>8);
                msgTx.data[2]=(unsigned char)distance2;
                msgTx.data[3]=(unsigned char)(distance2>>8);
                msgTx.data[4]=(unsigned char)distance3;
                msgTx.data[5]=(unsigned char)(distance3>>8);
                msgTx.data[6]=(unsigned char)distance4;
                msgTx.data[7]=(unsigned char)(distance4>>8);
                can.write(msgTx);
                SendAck(ACKNOWLEDGE_TELEMETRE,RECEPTION_RECALAGE);
                break;



//--------------------------------------------------------------------------ACK carte pompe----------------------------------------------


            case HACHEUR_STATUT_VENTOUSES:
                status_pompe = msgRxBuffer[FIFO_lecture].data[1];
                //can.write(CANMessage(0x529, &status_pompe,1));
                break;

            case HACHEUR_GET_ATOM_ACK:
                status_pompe |= (0x01 << msgRxBuffer[FIFO_lecture].data[0]);
                //can.write(CANMessage(0x529, &status_pompe,1));
                break;

            case HACHEUR_RELEASE_ATOM_ACK :
                status_pompe &= ~(0x01 << msgRxBuffer[FIFO_lecture].data[0]);
                break;
                
            case HACHEUR_ETAT_CONTACTS : 
                status_contact = msgRxBuffer[FIFO_lecture].data[0];
                break;

//-------------------------------------------------------------------------------------------------------------------------------------------



            case PRESENTOIR_AVANT:
                fpresentoir_avant=1;
                break;

            case GABARIT_ROBOT:
                SendAck(ACKNOWLEDGE_HERKULEX, ACK_ACTION);
                gabarit_robot();

                SendAck(ACKNOWLEDGE_HERKULEX, ACK_FIN_ACTION);
                break;

            case AVANT_RELACHE:
                favant_relache=1;
                break;


#ifdef ROBOT_SMALL


//-------------------------------------------------------------------------Actions petit robot----------------------------------------------



            case PRESENTOIR_ARRIERE:
                fpresentoir_arriere=1;
                break;

            case BALANCE_AVANT:
                fbalance_avant=1;
                break;

            case BALANCE_ARRIERE:
                fbalance_arriere=1;
                break;

            case ACCELERATEUR_AVANT:
                faccelerateur_avant=1;
                break;

            case ACCELERATEUR_ARRIERE:
                faccelerateur_arriere=1;
                break;

            case GOLDENIUM_AVANT:
                fgoldenium_avant=1;
                break;

            case GOLDENIUM_ARRIERE:
                fgoldenium_arriere=1;
                break;

            case SOL_AVANT:
                fsol_avant=1;
                break;

            case SOL_ARRIERE:
                fsol_arriere=1;
                break;

            case SOL_AVANT_RELACHE:
                fsol_avant_relache=1;
                break;

            case SOL_ARRIERE_RELACHE:
                fsol_arriere_relache=1;
                break;


            

            case ARRIERE_RELACHE:
                farriere_relache=1;
                break;
            case RECROQUEVILLER:
                SendAck(ACKNOWLEDGE_HERKULEX, ACK_ACTION);
                recroqueviller_avant();
                recroqueviller_arriere();
                verification();
                SendAck(ACKNOWLEDGE_HERKULEX, ACK_FIN_ACTION);
                break;

            case VENTOUSE_AV_CENTRE_BALANCE:
                SendAck(ACKNOWLEDGE_HERKULEX, ACK_ACTION);
                goldenium_avant();
                verification();
                SendAck(ACKNOWLEDGE_HERKULEX, ACK_FIN_ACTION);
                break;

            case VENTOUSE_AR_CENTRE_BALANCE:
                SendAck(ACKNOWLEDGE_HERKULEX, ACK_ACTION);
                goldenium_arriere();
                positionControl(AR_poigne_D, 200,1,BLED_ON,3);//actionneur
                verification();
                SendAck(ACKNOWLEDGE_HERKULEX, ACK_FIN_ACTION);
                break;

            case ACCELERATEUR_INSERTION_AVANT_GAUCHE:
                SendAck(ACKNOWLEDGE_HERKULEX, ACK_ACTION);
                accelerateur_insertion_avant_gauche();
                SendAck(ACKNOWLEDGE_HERKULEX, ACK_FIN_ACTION);
                break;

            case ACCELERATEUR_INSERTION_ARRIERE_GAUCHE :
                SendAck(ACKNOWLEDGE_HERKULEX, ACK_ACTION);
                accelerateur_insertion_arriere_gauche();
                SendAck(ACKNOWLEDGE_HERKULEX, ACK_FIN_ACTION);
                break;

#endif

#ifdef ROBOT_BIG


            case ASCENSEUR:
                flag_ascenseur = msgRxBuffer[FIFO_lecture].data[0];
                break;

#endif
        }
        FIFO_lecture=(FIFO_lecture+1)%SIZE_FIFO;

    }


}