Diff: mbed/wait_api.h

Revision:

16:7321fb3bb396

Parent:

15:c2fc239e85df

Child:

17:d1594579eec6

--- a/mbed/wait_api.h	Thu May 11 12:55:52 2017 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,94 +0,0 @@
-/* Title: wait
- * Generic wait functions.
- *
- * These provide simple NOP type wait capabilities.
- *
- * Example:
- * > #include "mbed.h"
- * >
- * > DigitalOut heartbeat(LED1);
- * >
- * > int main() {
- * >     while (1) {
- * >         heartbeat = 1;
- * >         wait(0.5);
- * >         heartbeat = 0;
- * >         wait(0.5);
- * >     }
- * > }
- */
-
-/* mbed Microcontroller Library - wait_api
- * Copyright (c) 2009 ARM Limited. All rights reserved.
- */ 
- 
-#ifndef MBED_WAIT_API_H
-#define MBED_WAIT_API_H
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/* Function: wait
- *  Waits for a number of seconds, with microsecond resolution (within
- *  the accuracy of single precision floating point).
- *
- * Variables:
- *  s - number of seconds to wait
- */
-void wait(float s);
-
-/* Function: wait_ms
- *  Waits a number of milliseconds.
- *
- * Variables:
- *  ms - the whole number of milliseconds to wait
- */
-void wait_ms(int ms);
-
-/* Function: wait_us
- *  Waits a number of microseconds.
- *
- * Variables:
- *  us - the whole number of microseconds to wait
- */
-void wait_us(int us);
-
-#ifdef TARGET_LPC11U24
-/* Function: sleep
- *  Send the microcontroller to sleep
- * 
- * The processor is setup ready for sleep, and sent to sleep using __WFI(). In this mode, the
- * system clock to the core is stopped until a reset or an interrupt occurs. This eliminates 
- * dynamic power used by the processor, memory systems and buses. The processor, peripheral and 
- * memory state are maintained, and the peripherals continue to work and can generate interrupts.
- * 
- * The processor can be woken up by any internal peripheral interrupt or external pin interrupt.
- * 
- * Note: The mbed interface semihosting is disconnected as part of going to sleep, and can not be restored. 
- * Flash re-programming and the USB serial port will remain active, but the mbed program will no longer be
- * able to access the LocalFileSystem
- */
-void sleep(void);
-
-/* Function: deepsleep
- *  Send the microcontroller to deep sleep
- * 
- * This processor is setup ready for deep sleep, and sent to sleep using __WFI(). This mode
- * has the same sleep features as sleep plus it powers down peripherals and clocks. All state
- * is still maintained. 
- * 
- * The processor can only be woken up by an external interrupt on a pin or a watchdog timer.
- * 
- * Note: The mbed interface semihosting is disconnected as part of going to sleep, and can not be restored. 
- * Flash re-programming and the USB serial port will remain active, but the mbed program will no longer be
- * able to access the LocalFileSystem
- */
-void deepsleep(void);
-#endif
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif