Diff: mbed/I2C.h

Revision:

16:7321fb3bb396

Parent:

15:c2fc239e85df

Child:

17:d1594579eec6

--- a/mbed/I2C.h	Thu May 11 12:55:52 2017 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,142 +0,0 @@
-/* mbed Microcontroller Library - I2C
- * Copyright (c) 2007-2011 ARM Limited. All rights reserved.
- */ 
- 
-#ifndef MBED_I2C_H
-#define MBED_I2C_H
-
-#include "device.h"
-
-#if DEVICE_I2C
-
-#include "platform.h"
-#include "PinNames.h"
-#include "PeripheralNames.h"
-#include "Base.h"
-
-namespace mbed {
-
-/* Class: I2C
- *  An I2C Master, used for communicating with I2C slave devices
- *
- * Example:
- * > // Read from I2C slave at address 0x62
- * >
- * > #include "mbed.h"
- * >
- * > I2C i2c(p28, p27);
- * >
- * > int main() {
- * >     int address = 0x62;
- * >     char data[2];
- * >     i2c.read(address, data, 2);
- * > }
- */
-class I2C : public Base {
-
-public:
-
-    enum RxStatus {
-        NoData
-        , MasterGeneralCall
-        , MasterWrite
-        , MasterRead
-    };
-
-    enum Acknowledge {
-          NoACK = 0
-        , ACK   = 1
-    };
-
-    /* Constructor: I2C
-     *  Create an I2C Master interface, connected to the specified pins
-     *
-     * Variables:
-     *  sda - I2C data line pin
-     *  scl - I2C clock line pin
-     */
-    I2C(PinName sda, PinName scl, const char *name = NULL);
-
-    /* Function: frequency
-     *  Set the frequency of the I2C interface
-     *
-     * Variables:
-     *  hz - The bus frequency in hertz
-     */
-    void frequency(int hz);
-
-    /* Function: read
-     *  Read from an I2C slave
-     *
-     * Performs a complete read transaction. The bottom bit of
-     * the address is forced to 1 to indicate a read.
-     *
-     * Variables:
-     *  address - 8-bit I2C slave address [ addr | 1 ]
-     *  data - Pointer to the byte-array to read data in to 
-     *  length - Number of bytes to read
-     *  repeated - Repeated start, true - don't send stop at end
-     *  returns - 0 on success (ack), or non-0 on failure (nack)
-     */ 
-    int read(int address, char *data, int length, bool repeated = false); 
-
-    /* Function: read
-     *  Read a single byte from the I2C bus
-     *
-     * Variables:
-     *  ack - indicates if the byte is to be acknowledged (1 = acknowledge)
-     *  returns - the byte read
-     */
-    int read(int ack);
-
-    /* Function: write
-     *  Write to an I2C slave
-     *
-     * Performs a complete write transaction. The bottom bit of
-     * the address is forced to 0 to indicate a write.
-     *
-     * Variables:
-     *  address - 8-bit I2C slave address [ addr | 0 ]
-     *  data - Pointer to the byte-array data to send 
-     *  length - Number of bytes to send
-     *  repeated - Repeated start, true - do not send stop at end
-     *  returns - 0 on success (ack), or non-0 on failure (nack)
-     */ 
-    int write(int address, const char *data, int length, bool repeated = false);
-
-    /* Function: write
-     *  Write single byte out on the I2C bus
-     *
-     * Variables:
-     *  data - data to write out on bus
-     *  returns - a '1' if an ACK was received, a '0' otherwise
-     */
-    int write(int data);
-
-    /* Function: start
-     *  Creates a start condition on the I2C bus
-     */
-
-    void start(void);
-
-    /* Function: stop
-     *  Creates a stop condition on the I2C bus
-     */
-    void stop(void);
-
-protected:
-
-    void aquire();
-
-    I2CName     _i2c;
-    static I2C  *_owner;
-    int         _hz;
-
-};
-
-} // namespace mbed
-
-#endif
-
-#endif
-