strat des robots
Fork of CRAC-Strat_2017 by
Diff: mbed/PinNames.h
- Revision:
- 0:ad97421fb1fb
- Child:
- 13:93edbb03a8c6
diff -r 000000000000 -r ad97421fb1fb mbed/PinNames.h --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/mbed/PinNames.h Wed Apr 13 22:04:54 2016 +0000 @@ -0,0 +1,254 @@ +/* mbed Microcontroller Library - PinNames + * Copyright (C) 2008-2011 ARM Limited. All rights reserved. + * + * Provides the mapping of mbed DIP and LPC Pin Names + */ + +#ifndef MBED_PINNAMES_H +#define MBED_PINNAMES_H + +#include "cmsis.h" + +#ifdef __cplusplus +extern "C" { +#endif + +#if defined(TARGET_LPC1768) || defined(TARGET_LPC2368) + +enum PinName { + + // LPC Pin Names + P0_0 = LPC_GPIO0_BASE, P0_1, P0_2, P0_3, P0_4, P0_5, P0_6, P0_7 + , P0_8, P0_9, P0_10, P0_11, P0_12, P0_13, P0_14, P0_15 + , P0_16, P0_17, P0_18, P0_19, P0_20, P0_21, P0_22, P0_23 + , P0_24, P0_25, P0_26, P0_27, P0_28, P0_29, P0_30, P0_31 + , P1_0, P1_1, P1_2, P1_3, P1_4, P1_5, P1_6, P1_7 + , P1_8, P1_9, P1_10, P1_11, P1_12, P1_13, P1_14, P1_15 + , P1_16, P1_17, P1_18, P1_19, P1_20, P1_21, P1_22, P1_23 + , P1_24, P1_25, P1_26, P1_27, P1_28, P1_29, P1_30, P1_31 + , P2_0, P2_1, P2_2, P2_3, P2_4, P2_5, P2_6, P2_7 + , P2_8, P2_9, P2_10, P2_11, P2_12, P2_13, P2_14, P2_15 + , P2_16, P2_17, P2_18, P2_19, P2_20, P2_21, P2_22, P2_23 + , P2_24, P2_25, P2_26, P2_27, P2_28, P2_29, P2_30, P2_31 + , P3_0, P3_1, P3_2, P3_3, P3_4, P3_5, P3_6, P3_7 + , P3_8, P3_9, P3_10, P3_11, P3_12, P3_13, P3_14, P3_15 + , P3_16, P3_17, P3_18, P3_19, P3_20, P3_21, P3_22, P3_23 + , P3_24, P3_25, P3_26, P3_27, P3_28, P3_29, P3_30, P3_31 + , P4_0, P4_1, P4_2, P4_3, P4_4, P4_5, P4_6, P4_7 + , P4_8, P4_9, P4_10, P4_11, P4_12, P4_13, P4_14, P4_15 + , P4_16, P4_17, P4_18, P4_19, P4_20, P4_21, P4_22, P4_23 + , P4_24, P4_25, P4_26, P4_27, P4_28, P4_29, P4_30, P4_31 + + // mbed DIP Pin Names + , p5 = P0_9 + , p6 = P0_8 + , p7 = P0_7 + , p8 = P0_6 + , p9 = P0_0 + , p10 = P0_1 + , p11 = P0_18 + , p12 = P0_17 + , p13 = P0_15 + , p14 = P0_16 + , p15 = P0_23 + , p16 = P0_24 + , p17 = P0_25 + , p18 = P0_26 + , p19 = P1_30 + , p20 = P1_31 + , p21 = P2_5 + , p22 = P2_4 + , p23 = P2_3 + , p24 = P2_2 + , p25 = P2_1 + , p26 = P2_0 + , p27 = P0_11 + , p28 = P0_10 + , p29 = P0_5 + , p30 = P0_4 + + // Other mbed Pin Names +#ifdef MCB1700 + , LED1 = P1_28 + , LED2 = P1_29 + , LED3 = P1_31 + , LED4 = P2_2 +#else + , LED1 = P1_18 + , LED2 = P1_20 + , LED3 = P1_21 + , LED4 = P1_23 +#endif + , USBTX = P0_2 + , USBRX = P0_3 + + // Not connected + , NC = (int)0xFFFFFFFF + +}; +typedef enum PinName PinName; + +enum PinMode { + PullUp = 0 + , PullDown = 3 + , PullNone = 2 + , OpenDrain = 4 +}; +typedef enum PinMode PinMode; + +// version of PINCON_TypeDef using register arrays +typedef struct { + __IO uint32_t PINSEL[11]; + uint32_t RESERVED0[5]; + __IO uint32_t PINMODE[10]; +#ifndef TARGET_LPC2368 +// Open drain mode is not available on LPC2368 + __IO uint32_t PINMODE_OD[5]; +#endif +} PINCONARRAY_TypeDef; + +#define PINCONARRAY ((PINCONARRAY_TypeDef *)LPC_PINCON_BASE) + + +#elif defined(TARGET_LPC11U24) + +enum PinName { + + // LPC11U Pin Names + P0_0 = 0 + , P0_1 = 1 + , P0_2 = 2 + , P0_3 = 3 + , P0_4 = 4 + , P0_5 = 5 + , P0_6 = 6 + , P0_7 = 7 + , P0_8 = 8 + , P0_9 = 9 + , P0_10 = 10 + , P0_11 = 11 + , P0_12 = 12 + , P0_13 = 13 + , P0_14 = 14 + , P0_15 = 15 + , P0_16 = 16 + , P0_17 = 17 + , P0_18 = 18 + , P0_19 = 19 + , P0_20 = 20 + , P0_21 = 21 + , P0_22 = 22 + , P0_23 = 23 + , P0_24 = 24 + , P0_25 = 25 + , P0_26 = 26 + , P0_27 = 27 + + , P1_0 = 32 + , P1_1 = 33 + , P1_2 = 34 + , P1_3 = 35 + , P1_4 = 36 + , P1_5 = 37 + , P1_6 = 38 + , P1_7 = 39 + , P1_8 = 40 + , P1_9 = 41 + , P1_10 = 42 + , P1_11 = 43 + , P1_12 = 44 + , P1_13 = 45 + , P1_14 = 46 + , P1_15 = 47 + , P1_16 = 48 + , P1_17 = 49 + , P1_18 = 50 + , P1_19 = 51 + , P1_20 = 52 + , P1_21 = 53 + , P1_22 = 54 + , P1_23 = 55 + , P1_24 = 56 + , P1_25 = 57 + , P1_26 = 58 + , P1_27 = 59 + , P1_28 = 60 + , P1_29 = 61 + + , P1_31 = 63 + + // mbed DIP Pin Names + , p5 = P0_9 + , p6 = P0_8 + , p7 = P1_29 + , p8 = P0_2 + , p9 = P1_27 + , p10 = P1_26 + , p11 = P1_22 + , p12 = P1_21 + , p13 = P1_20 + , p14 = P1_23 + , p15 = P0_11 + , p16 = P0_12 + , p17 = P0_13 + , p18 = P0_14 + , p19 = P0_16 + , p20 = P0_22 + , p21 = P0_7 + , p22 = P0_17 + , p23 = P1_17 + , p24 = P1_18 + , p25 = P1_24 + , p26 = P1_25 + , p27 = P0_4 + , p28 = P0_5 + , p29 = P1_5 + , p30 = P1_2 + + , p33 = P0_3 + , p34 = P1_15 + , p35 = P0_20 + , p36 = P0_21 + + // Other mbed Pin Names + , LED1 = P1_8 + , LED2 = P1_9 + , LED3 = P1_10 + , LED4 = P1_11 + + , USBTX = P0_19 + , USBRX = P0_18 + + // Not connected + , NC = (int)0xFFFFFFFF + +}; +typedef enum PinName PinName; + +typedef enum { + CHANNEL0=FLEX_INT0_IRQn, + CHANNEL1=FLEX_INT1_IRQn, + CHANNEL2=FLEX_INT2_IRQn, + CHANNEL3=FLEX_INT3_IRQn, + CHANNEL4=FLEX_INT4_IRQn, + CHANNEL5=FLEX_INT5_IRQn, + CHANNEL6=FLEX_INT6_IRQn, + CHANNEL7=FLEX_INT7_IRQn +} Channel; + +enum PinMode { + PullUp = 2 + , PullDown = 1 + , PullNone = 0 + , Repeater = 3 + , OpenDrain = 4 +}; +typedef enum PinMode PinMode; +#endif + + +#ifdef __cplusplus +} +#endif + +#endif