Transistor Gijutsu, October 2014, Special Features Chapter 9, Software of the Function Generator トランジスタ技術2014年10月号 特集第9章のソフトウェア わがまま波形発生器のソフトウェア
Information
tg_201410s8_AD7714 トランジスタ技術 2014年 10月号 第9章のソフトウェア
Program for Section 9 in October. 2014 issue of the Transistor Gijutsu
(Japanese electronics magazine)
概要
このプログラムは、ソフトウエアDDSにより、任意の波形を出力(2ch)します。 特徴は次のとおりです。
- PWM出力をDAコンバータとして利用します。
- 周波数や波形、バースト条件などを個別に設定できる独立した出力を2チャネル持っています。
- 周波数分解能0.023mHz
- 周波数範囲0.023mHz~10kHz
- 各チャネルにそれぞれ、波形の先頭で出力されるトリガ出力があります。
- 出力波形を関数で定義できます。
- 休止波数、出力波数、を設定することでバースト波形が出力できます。
ファイル
このソフトウエアは、次のファイルから構成されています。
- DDS.cpp - DDSによる波形発生
- main.cpp - main()関数
詳細については、10月号の記事および上記ファイル中のコメントを参照してください。
Diff: DDS/DDS.h
- Revision:
- 0:f1ecca559ec3
diff -r 000000000000 -r f1ecca559ec3 DDS/DDS.h --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/DDS/DDS.h Fri Aug 29 08:33:17 2014 +0000 @@ -0,0 +1,74 @@ +#ifndef DDS_h +#define DDS_h + +#define PACCLEN (4294967296.0) // 位相積算レジスタの最大値 2^23 +#define PI (3.1415926535897932385) // 円周率 + +// 出力電圧の設定 +#define VCC (3.27) // 電源電圧、実測 +#define BUFMAG (2.0) // 出力バッファの増幅率 +#define WFMAG (1.0/(VCC*BUFMAG)) // PWM値算出のための係数 + +class DDS { +private: + static const int MAINCLK = 48000000; // CPUのシステムクロック値 + static const int DDSCLK = 100000; // DDSの基準クロック値 + static const int TBLSIZEBITS = 10; // 波形配列の長さを決めるビット数 + static const int WFVGND = 0; // バースト波形の無信号状態の出力値 + // 以下は上の値から設定されるので変更不可 + static const int TBLSIZE = 1 << TBLSIZEBITS;// 波形配列の長さ + static const int WFRES = 32 - TBLSIZEBITS; // 位相積算レジスタを波形配列の引数に変換するためのビットシフト値 + static const int WFVSPN = MAINCLK / DDSCLK; // PWMの最大値 + + static int16_t waveForm1[]; + static int16_t waveForm2[]; + + static unsigned int phaseAcc1; + static unsigned int phaseInc1; + static unsigned int phaseShift1; + static int bstBgn1; + static int bstEnd1; + static int bstLen1; + static int bstDcL1; + static int wc1; + static int lp1; + + static unsigned int phaseAcc2; + static unsigned int phaseInc2; + static unsigned int phaseShift2; + static int bstBgn2; + static int bstEnd2; + static int bstLen2; + static int bstDcL2; + static int wc2; + static int lp2; + + void fillTable(int16_t wftbl[], float level, float ofst, float (*waveform)(float x)); + +public: + static int trigger1; + static int trigger2; + + DDS(); + static void start(void); + static void stop(void); + static void reset(void); + int getPhase(void){ + return phaseAcc1; + }; + static inline int getNextPw1(void); + static inline int getNextPw2(void); + void osc1(float freq, float phase, float level, float ofst, float (*waveform)(float x)); + void osc1(float freq, float phase); + void osc2(float freq, float phase, float level, float ofst, float (*waveform)(float x)); + void osc2(float freq, float phase); + void burst1(int begin, int end, int length, float dcLevel); + void burst2(int begin, int end, int length, float dcLevel); +}; + +float triangle(float x); +float square(float x); + + + +#endif