File content as of revision 7:6cb27cce4c50:

#include "mbed.h"
#include "rtos.h"
#include "Filter.hpp"


unsigned short ADC_DATA;

//Init  values for difference equation
//MBED Class Instances follows
DigitalOut SampLED(LED1);              //Digital Output  (GREEN LED is PB_3, D13 You can use an Oscilloscope on This pin to confirm sample rate)

//Analog Inputs
AnalogIn QDEF(PA_2);
AnalogIn BDEF(PA_7);
AnalogIn FDEF(PA_6);
AnalogIn  Ain(PA_1);                    //Analog Input (Signal Input 0 to +3 Volts)
AnalogOut Aout(PA_4);                   //Analog Output (Signal Input 0 to +3 Volts)

//Declare Tickers
Ticker sample_timer;
Ticker coeff_change;

//Declare Ticker Rates
float sample_rate = (1.0/35000);        //Rate of sampling
float coeff_rate = (1.0 / 20);          //Rate of updating coefficients

//Initial Input Value
float input = 0.0;

//Declare Filter
FILTER BP_filter(48000,10000,-16,2);  //Create object of type Filter(Fs,Fo,Boost,Q)

//Declare Fixed Variables
float Fo = 1;
float Boost = 0;
float Q = 1;

//Declare Temporary Coefficient Values
float Fo_Current;
float Boost_Current;
float Q_Current;

//Forward Declarations
void sampler(void);
void coeff_update(void);

int main()
{
    //sample_timer.attach(&sampler,sample_rate);
    coeff_change.attach(&coeff_update,coeff_rate);
    printf("Hello");
}

void coeff_update(void)
{
    Fo_Current = FDEF * 39999 + 1;
    if (abs(Fo_Current - BP_filter.Get_Fo()) > 50)      //If Centre Frequency has changed significantly
    {
        BP_filter.Update_Fo(Fo_Current);                //Update Centre Frequency
    }
    Boost_Current = BDEF * 100 - 50;
    if (abs(Boost_Current - BP_filter.Get_Boost()) > 2) //If Boost has changed significantly
    {
        BP_filter.Update_Boost(Boost_Current);          //Update Boost
    }
    Q_Current = QDEF * 49 + 1;
    if (abs(Q_Current - BP_filter.Get_Q()) > 2)         //If Q has changed significantly
    {
        BP_filter.Update_Q(Q_Current);                  //Update Q
    }
    BP_filter.Define_Filter();                          //Calculate the coefficients
    //BP_filter.Print_Filter();                           //Print the ceofficients
}

void sampler(void)
{
    SampLED = 1;                        //LED Indicates start of sampling

    input = Ain;
    BP_filter.setvalue(input);          //Input ADC. N.B. ADC in MBED is 0.0 to 1.0 float!!!!!!
    Aout = BP_filter.getvalue();
    

    SampLED = 0;      //LED Indicates end of sampling
}