CAC_smartcushion / Mbed OS AdiSense1000_V21_Smartcushion

Important changes to repositories hosted on mbed.com

Mbed hosted mercurial repositories are deprecated and are due to be permanently deleted in July 2026.

To keep a copy of this software download the repository Zip archive or clone locally using Mercurial.

It is also possible to export all your personal repositories from the account settings page.

Fork of Sean_AdiSense1000_V21 by Rohan Gurav

src/myproswift_periph.cpp

Committer:
nfathurr
Date:
2018-09-27
Revision:
35:853be4d80ff3
Parent:
34:029fc3b83f78
Child:
36:4aded4b4f060

File content as of revision 35:853be4d80ff3:

/*
 ******************************************************************************
 * file:   myswift_periph.cpp
 *-----------------------------------------------------------------------------
 */

#include "myproswift_periph.h"

/*
 ******************************************************************************
 * ADISense1000
 *-----------------------------------------------------------------------------
 */
//connection information for initialising ADISense1000
/*
ADI_SENSE_CONNECTION connectionInfo = {
    .type = ADI_SENSE_CONNECTION_TYPE_SPI,
    .spi = {
        .mosiPin    = SPI_MOSI,
        .misoPin    = SPI_MISO,
        .sckPin     = SPI_SCK,
        .csPin      = D10,
        .maxSpeedHz = 2000000,
    },
    .gpio = {
        .resetPin     = D6,
        .errorPin     = D3,
        .alertPin     = D4,
        .datareadyPin = D5,
    },
    .log = {
        .txPin        = D1,
        .rxPin        = D0,
        .baudRate     = 115200,
        .disableLogs  = false,
    },
};
*/

ADI_SENSE_CONNECTION connectionInfo = {
    .type = ADI_SENSE_CONNECTION_TYPE_SPI,
    .spi = {
        .mosiPin    = 	SENSE_SPI_MOSI,
        .misoPin    = 	SENSE_SPI_MISO,
        .sckPin     = 	SENSE_SPI_SCK,
        .csPin      = 	SENSE_SPI_CS,
        .maxSpeedHz = 	SENSE_SPI_FREQUENCY,
    },                  
    .gpio = {           
        .resetPin     = SENSE_RST_PIN,
        .errorPin     = SENSE_ERROR_PIN,
        .alertPin     = SENSE_ALERT_PIN,
        .datareadyPin = SENSE_DREADY_PIN,
    },
    .log = {
        /*
        * #define PC_UART_TX_PIN   PA_11
        * #define PC_UART_RX_PIN   PA_12
        */
        .txPin        = PA_11,
        .rxPin        = PA_12,
        .baudRate     = 115200,
        .disableLogs  = false,
    },
};

/*
 ******************************************************************************
 * Bluetooth Low Energy
 *-----------------------------------------------------------------------------
 */
//reset pin of BLE module
DigitalOut ble_rst(BLE_RST_PIN, 0);

//flow control
DigitalOut 	ble_Cts(BLE_CTS_PIN, 1);
DigitalIn  	ble_Rts(BLE_RTS_PIN);

Serial bleSerialDevice(BLE_SERIAL_TX, BLE_SERIAL_RX, BLE_BAUD_RATE);

#ifdef BL652
DigitalOut bleMode0(BLE_MODE_0_PIN, 0);
DigitalOut bleMode1(BLE_MODE_1_PIN, 0);
#endif


/*
 ******************************************************************************
 * PC Serial
 *-----------------------------------------------------------------------------
 */

//pointer initialised in adi_sense_Log.cpp using pins defined in this header
Serial *gpUartDevice = new Serial(PC_UART_TX_PIN, PC_UART_RX_PIN, PC_UART_BAUDRATE);

/*
 ******************************************************************************
 * Battery
 *-----------------------------------------------------------------------------
 */

//pin for reading the current voltage of the battery
//need solution to this. Battery ranges from 4.2V to 2V where the adc can only
//read to 3.3V (VDD)
//AnalogIn batteryV(BATTERY_V_PIN);

/*
 ******************************************************************************
 * Status LED
 *-----------------------------------------------------------------------------
 */

//flash when flash led is called, also iluminated when device boots successfully
DigitalOut status_led(STATUS_LED_PIN, 0);
//DigitalOut status_led1(PC_6, 0);