BLE_EddystoneBeaconConfigService - The eddystone config service allows you to config…

Bluetooth Low Energy » Code » BLE_EddystoneBeaconConfigService

Bluetooth Low Energy / Mbed 2 deprecated BLE_EddystoneBeaconConfigService Featured

The eddystone config service allows you to configure the eddystone frame data over BLE for a set period of time and then starts an eddystone beacon. This example defaults to 30 seconds of config time.

Dependencies: BLE_API mbed nRF51822 X_NUCLEO_IDB0XA1

Fork of BLE_EddystoneBeaconConfigServiceRelease by Austin Blackstone

This is the eddystone config service. This code starts up and for a user configured time period (default 30 seconds) will advertise the configuration service.

The configuration service allows for modifying various frames of the eddystone specification.

For more details on the Configuration Service please see : https://github.com/google/eddystone/blob/master/eddystone-url/docs/config-service-spec.md

EddystoneTypes.h

Committer:: Vincent Coubard
Date:: 2016-09-20
Revision:: 8:f53d48e5d64f
Parent:: 6:321047f0190a

File content as of revision 8:f53d48e5d64f:

/* mbed Microcontroller Library
 * Copyright (c) 2006-2015 ARM Limited
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *     http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

#ifndef __EDDYSTONETYPES_H__
#define __EDDYSTONETYPES_H__

#include <stdint.h>
#include <stddef.h>

#define UUID_URL_BEACON(FIRST, SECOND) {                         \
        0xee, 0x0c, FIRST, SECOND, 0x87, 0x86, 0x40, 0xba,       \
        0xab, 0x96, 0x99, 0xb9, 0x1a, 0xc9, 0x81, 0xd8,          \
}

const uint8_t EDDYSTONE_UUID[] = {0xAA, 0xFE};

const uint8_t UUID_URL_BEACON_SERVICE[]    = UUID_URL_BEACON(0x20, 0x80);
const uint8_t UUID_LOCK_STATE_CHAR[]       = UUID_URL_BEACON(0x20, 0x81);
const uint8_t UUID_LOCK_CHAR[]             = UUID_URL_BEACON(0x20, 0x82);
const uint8_t UUID_UNLOCK_CHAR[]           = UUID_URL_BEACON(0x20, 0x83);
const uint8_t UUID_URL_DATA_CHAR[]         = UUID_URL_BEACON(0x20, 0x84);
const uint8_t UUID_FLAGS_CHAR[]            = UUID_URL_BEACON(0x20, 0x85);
const uint8_t UUID_ADV_POWER_LEVELS_CHAR[] = UUID_URL_BEACON(0x20, 0x86);
const uint8_t UUID_TX_POWER_MODE_CHAR[]    = UUID_URL_BEACON(0x20, 0x87);
const uint8_t UUID_BEACON_PERIOD_CHAR[]    = UUID_URL_BEACON(0x20, 0x88);
const uint8_t UUID_RESET_CHAR[]            = UUID_URL_BEACON(0x20, 0x89);

const char DEVICE_NAME[] = "EDDYSTONE CONFIG";

const char DEFAULT_URL[] = "http://www.mbed.com/";

enum PowerModes {
    TX_POWER_MODE_LOWEST,
    TX_POWER_MODE_LOW,
    TX_POWER_MODE_MEDIUM,
    TX_POWER_MODE_HIGH,
    NUM_POWER_MODES
};

/* 128 bits of lock */
typedef uint8_t Lock_t[16];
typedef int8_t PowerLevels_t[NUM_POWER_MODES];

const uint16_t URL_DATA_MAX = 18;
typedef uint8_t UrlData_t[URL_DATA_MAX];

/* UID Frame Type subfields */
const size_t UID_NAMESPACEID_SIZE = 10;
typedef uint8_t UIDNamespaceID_t[UID_NAMESPACEID_SIZE];
const size_t UID_INSTANCEID_SIZE = 6;
typedef uint8_t UIDInstanceID_t[UID_INSTANCEID_SIZE];

/* Callbacks for updating BateryVoltage and Temperature */
typedef uint16_t (*TlmUpdateCallback_t) (uint16_t);

/* Size of Eddystone UUID needed for all frames */
const uint16_t EDDYSTONE_UUID_SIZE = sizeof(EDDYSTONE_UUID);

#endif /* __EDDYSTONETYPES_H__ */