Diff: LM75B.h

Revision:

2:9ecc39b2ca70

Parent:

1:3da8df4319e8

Child:

3:9d68eed28bfb

--- a/LM75B.h	Wed Jul 31 22:11:31 2013 +0000
+++ b/LM75B.h	Thu Aug 01 16:41:49 2013 +0000
@@ -1,18 +1,19 @@
-/* Copyright (c) 2013 Neil Thiessen, MIT License
+/* LM75B Driver Library
+ * Copyright (c) 2013 Neil Thiessen, MIT License
  *
- * Permission is hereby granted, free of charge, to any person obtaining a copy of this software 
- * and associated documentation files (the "Software"), to deal in the Software without restriction, 
- * including without limitation the rights to use, copy, modify, merge, publish, distribute, 
- * sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is 
+ * Permission is hereby granted, free of charge, to any person obtaining a copy of this software
+ * and associated documentation files (the "Software"), to deal in the Software without restriction,
+ * including without limitation the rights to use, copy, modify, merge, publish, distribute,
+ * sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is
  * furnished to do so, subject to the following conditions:
  *
- * The above copyright notice and this permission notice shall be included in all copies or 
+ * The above copyright notice and this permission notice shall be included in all copies or
  * substantial portions of the Software.
  *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING 
- * BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND 
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, 
- * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, 
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING
+ * BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,
+ * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
  * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
  */
 
@@ -21,47 +22,11 @@
 
 #include "mbed.h"
 
-//i2c address definitions
-#define LM75B_A0 (0x48 << 1)
-#define LM75B_A1 (0x49 << 1)
-#define LM75B_A2 (0x4A << 1)
-#define LM75B_A3 (0x4B << 1)
-#define LM75B_A4 (0x4C << 1)
-#define LM75B_A5 (0x4D << 1)
-#define LM75B_A6 (0x4E << 1)
-#define LM75B_A7 (0x4F << 1)
-
 //i2c register definitions
-#define LM75B_REG_TEMP 0x00
-#define LM75B_REG_CONF 0x01
-#define LM75B_REG_THYST 0x02
-#define LM75B_REG_TOS 0x03
-
-//Power mode enumeration
-typedef enum {
-    LM75B_Power_Normal,
-    LM75B_Power_Shutdown
-} LM75B_Power_t;
-
-//OS mode enumeration
-typedef enum {
-    LM75B_OS_Comparator,
-    LM75B_OS_Interrupt
-} LM75B_OS_Mode_t;
-
-//OS polarity enumeration
-typedef enum {
-    LM75B_OS_ActiveLow,
-    LM75B_OS_ActiveHigh
-} LM75B_OS_Polarity_t;
-
-//OS fault queue enumeration
-typedef enum {
-    LM75B_OS_FaultQueue_1,
-    LM75B_OS_FaultQueue_2,
-    LM75B_OS_FaultQueue_4,
-    LM75B_OS_FaultQueue_6
-} LM75B_OS_FaultQueue_t;
+#define __LM75B_REG_TEMP  0x00
+#define __LM75B_REG_CONF  0x01
+#define __LM75B_REG_THYST 0x02
+#define __LM75B_REG_TOS   0x03
 
 /** LM75B class.
  *  Used for controlling an LM75B temperature sensor connected via I2C.
@@ -72,7 +37,7 @@
  * #include "LM75B.h"
  *
  * Serial pc(USBTX, USBRX);
- * LM75B sensor(p28, p27, LM75B_A0);
+ * LM75B sensor(p28, p27, LM75B::ADDRESS_0);
  *
  * int main() {
  *     while (1) {
@@ -91,86 +56,129 @@
 class LM75B
 {
 public:
+    /** Represents the different I2C address possibilities for the LM75B
+     */
+    enum Address {
+        ADDRESS_0 = (0x48 << 1),    /**< A[2:0] pins = 000 */
+        ADDRESS_1 = (0x49 << 1),    /**< A[2:0] pins = 001 */
+        ADDRESS_2 = (0x4A << 1),    /**< A[2:0] pins = 010 */
+        ADDRESS_3 = (0x4B << 1),    /**< A[2:0] pins = 011 */
+        ADDRESS_4 = (0x4C << 1),    /**< A[2:0] pins = 100 */
+        ADDRESS_5 = (0x4D << 1),    /**< A[2:0] pins = 101 */
+        ADDRESS_6 = (0x4E << 1),    /**< A[2:0] pins = 110 */
+        ADDRESS_7 = (0x4F << 1)     /**< A[2:0] pins = 111 */
+    };
+
+    /** Represents the power mode of the LM75B
+     */
+    enum PowerMode {
+        POWER_NORMAL,   /**< Chip is enabled and samples every 100ms */
+        POWER_SHUTDOWN  /**< Chip is in low-power shutdown mode */
+    };
+
+    /** Represents OS pin mode of the LM75B
+     */
+    enum OSMode {
+        OS_COMPARATOR,  /**< OS is asserted when the temperature reaches the alert threshold, and de-asserted when the temperature drops below the alert hysteresis threshold */
+        OS_INTERRUPT    /**< OS is asserted when the temperature reaches the alert threshold, or drops below the alert hysteresis threshold, and only de-asserted when a register has been read */
+    };
+
+    /** Represents OS pin polarity of the LM75B
+     */
+    enum OSPolarity {
+        OS_ACTIVE_LOW,  /**< OS is a logic low when asserted, and a logic high when de-asserted */
+        OS_ACTIVE_HIGH  /**< OS is a logic high when asserted, and a logic low when de-asserted */
+    };
+
+    /** Represents OS pin fault queue length of the LM75B
+     */
+    enum OSFaultQueue {
+        OS_FAULT_QUEUE_1,   /**< OS is asserted after 1 fault */
+        OS_FAULT_QUEUE_2,   /**< OS is asserted after 2 consecutive faults */
+        OS_FAULT_QUEUE_4,   /**< OS is asserted after 4 consecutive faults */
+        OS_FAULT_QUEUE_6    /**< OS is asserted after 6 consecutive faults */
+    };
+
     /** Create an LM75B object connected to the specified I2C pins with the specified I2C slave address
      *
      * @param sda I2C data pin
      * @param scl I2C clock pin
      * @param addr I2C slave address
      */
-    LM75B(PinName sda, PinName scl, int addr);
-    
+    LM75B(PinName sda, PinName scl, Address addr);
+
     /** Get the current power mode of the LM75B
      *
      * @returns The current power mode as an LM75B_OS_Mode_t enum.
      */
-    LM75B_Power_t getPowerMode(void);
-    
+    LM75B::PowerMode getPowerMode(void);
+
     /** Set the power mode of the LM75B
      *
      * @param mode The new power mode as an LM75B_OS_Mode_t enum.
      */
-    void setPowerMode(LM75B_Power_t mode);
-    
+    void setPowerMode(PowerMode mode);
+
     /** Get the current OS pin mode of the LM75B
      *
      * @returns The current OS pin mode as an LM75B_OS_Mode_t enum.
      */
-    LM75B_OS_Mode_t getOSMode(void);
-    
+    LM75B::OSMode getOSMode(void);
+
     /** Set the OS pin mode of the LM75B
      *
      * @param mode The new OS pin mode as an LM75B_OS_Mode_t enum.
      */
-    void setOSMode(LM75B_OS_Mode_t mode);
-    
+    void setOSMode(OSMode mode);
+
     /** Get the current OS pin polarity of the LM75B
      *
      * @returns The current OS pin polarity as an LM75B_OS_Polarity_t enum.
      */
-    LM75B_OS_Polarity_t getOSPolarity(void);
-    
+    LM75B::OSPolarity getOSPolarity(void);
+
     /** Set the OS pin polarity of the LM75B
      *
      * @param polarity The new OS pin polarity as an LM75B_OS_Polarity_t enum.
      */
-    void setOSPolarity(LM75B_OS_Polarity_t polarity);
-    
+    void setOSPolarity(OSPolarity polarity);
+
     /** Get the current OS pin fault queue length of the LM75B
      *
      * @returns The current OS pin fault queue length as an LM75B_OS_FaultQueue_t enum.
      */
-    LM75B_OS_FaultQueue_t getOSFaultQueue(void);
-    
+    LM75B::OSFaultQueue getOSFaultQueue(void);
+
     /** Set the OS pin fault queue length of the LM75B
      *
      * @param queue The new OS pin fault queue length as an LM75B_OS_FaultQueue_t enum.
      */
-    void setOSFaultQueue(LM75B_OS_FaultQueue_t queue);
-    
+    void setOSFaultQueue(OSFaultQueue queue);
+
     /** Get the current alert temperature threshold of the LM75B
      *
      * @returns The current alert temperature threshold as a float.
      */
     float getAlertTemp(void);
-    
+
     /** Set the alert temperature threshold of the LM75B
      *
      * @param temp The new alert temperature threshold as a float.
      */
     void setAlertTemp(float temp);
-    
+
     /** Get the current alert temperature hysteresis threshold of the LM75B
      *
      * @returns The current alert temperature hysteresis threshold as a float.
      */
     float getAlertHyst(void);
-    
+
     /** Set the alert temperature hysteresis threshold of the LM75B
      *
      * @param temp The new alert temperature hysteresis threshold as a float.
      */
     void setAlertHyst(float temp);
-    
+
     /** Get the current temperature measurement of the LM75B
      *
      * @returns The current temperature measurement as a float.