Revision 1:5dca66437dd1, committed 2017-04-04

Comitter:

gume

Date:

Tue Apr 04 02:21:56 2017 +0000

Parent:

0:093f1cb20c52

Commit message:

Add documentation to the class

Changed in this revision

diff -r 093f1cb20c52 -r 5dca66437dd1 DeviceHubNet.h
--- a/DeviceHubNet.h	Tue Mar 28 01:33:39 2017 +0000
+++ b/DeviceHubNet.h	Tue Apr 04 02:21:56 2017 +0000
@@ -1,3 +1,9 @@
+/**
+ * @file DeviceHubNet.h
+ *
+ * Class declaration for DeviceHubNet
+ */
+
 #ifndef __DEVICEHUBNET_H__
 #define __DEVICEHUBNET_H__
 
@@ -40,6 +46,9 @@
     } data;
 };
 
+/**
+ * Driver for DeviceHubNet
+ */
 
 class DeviceHubNet
 {
@@ -62,28 +71,151 @@
     bool sendData(uint8_t type, uint8_t *data, uint8_t len);
     uint64_t getFullAddress();
     uint64_t getGWAddress();
-    
+
     void registerProject();
     void registerDevice();
 
-public:
-    DeviceHubNet(uint32_t projectId, uint8_t* apiKey, uint8_t* deviceId);
-    DeviceHubNet(uint32_t projectId, char* apiKeyStr, char* deviceIdStr);
-    virtual ~DeviceHubNet() {};
+protected:
 
-    bool radioPinConfig(PinName mosi, PinName miso, PinName sck, PinName cs, PinName ce);
-    bool radioConfig(uint16_t address, uint8_t channel);
-    void radioDump();
-
-    void processMsgs();
-
-    uint16_t registerSensor(char* sensorName);
-    uint16_t registerActuator(char *actuatorName, uint8_t type, void (*onReceive)(uint8_t, uint8_t, float));
     void reRegisterSensor(uint16_t sensorId);
     void reRegisterActuator(uint16_t actuatorId);
 
+public:
+
+    /**
+     * @name DeviceHubNet public interface
+     *
+     *  These are the main function in order to send/receive data to the gateway
+     *  The gateway will handle the communication to devicehub.net
+     *
+     *  The code does not work without the running gateway!
+     */
+    /**@{*/
+
+    /**
+     * DeviceHubNet Constructor
+     *
+     * Creates a new instance of this driver. At the moment only 1 device per driver
+     * The device might have multiple sensors and actuators
+     *
+     * @param projectId The projectId on the devicehub.net site
+     * @param apikey The 16 byte long APIkey on the devicehub.net site
+     * @param apikey The 16 byte long deviceID on the devicehub.net site
+     */
+    DeviceHubNet(uint32_t projectId, uint8_t* apiKey, uint8_t* deviceId);
+
+    /**
+     * DeviceHubNet Constructor
+     *
+     * Creates a new instance of this driver. At the moment only 1 device per driver.
+     * The device might have multiple sensors and actuators.
+     *
+     * @param projectId The projectId on the devicehub.net site
+     * @param apikey The string representation of the APIkey on the devicehub.net site
+     * @param apikey The string representation of the deviceID on the devicehub.net site
+     *
+     * @code DeviceHubNet DHN(4275, "bbbb950b-ad0c-4fcd-8f0a-546e154a1c35", "40854b01-0ff4-407f-bc63-fa75f6604ec4"); @endcode
+     */
+    DeviceHubNet(uint32_t projectId, char* apiKeyStr, char* deviceIdStr);
+    
+    virtual ~DeviceHubNet() {};
+
+    /**
+     * Set pins for the radio communication
+     *
+     * This should be called before radioConfig() !
+     *
+     * @param mosi The pin attached to SPI MOSI (Master Output)
+     * @param miso The pin attached to SPI MISO (Slave Input)
+     * @param sck The pin attached to SPI CLK (Clock)
+     * @param cs The pin attached to Chip Select
+     * @param ce The pin attached to Chip Enable
+     */
+    bool radioPinConfig(PinName mosi, PinName miso, PinName sck, PinName cs, PinName ce);
+    
+    /**
+     * Set node address and channel for the radio communication and
+     * initialize the radio interface
+     *
+     * radioPinConfig() should be callled first!
+     * This module and the gateway should be on the same channel!
+     *
+     * @param address Unique 2 byte address (0-65525)
+     * @param channel Radio channel (0-127)
+     */    
+    bool radioConfig(uint16_t address, uint8_t channel);
+
+    /**
+     * Dump radio modul configuration paramters using the stdout
+     *
+     */    
+    void radioDump();
+    
+    /**
+     * Process incoming messages and activates callbacks
+     *
+     * This function should be called frequently from the main code.
+     */    
+    void processMsgs();
+
+    /**
+     * Register a sensor on the device
+     *
+     * Sensor name should be the same as the one registered on devicehub.net
+     *
+     * @param sensorName name of the sensor
+     * @return sensor ID, which can be used to send data to devicehub.net
+     *
+     * @code
+     * uint16_t sid = DHN.registerSensor("LightSense");
+     * DHN.sendDigitalData(sid, 1);
+     * @endcode
+     */    
+    uint16_t registerSensor(char* sensorName);
+
+    /**
+     * Register an actuator on the device
+     *
+     * Actuator name should be the same as the one registered on devicehub.net
+     * Digital actuators get 0 or 1, Analog actuators get a float value
+     
+     * @param actuatorName name of the actuator
+     * @param type type of the actuator. 0: Digital,1: Analog
+     * @param onReceive callback function for incoming messages
+     * @return actuator ID, which is not used at the moment
+     *
+     * @code
+     * void onLightSwitchMsg(uint8_t type, uint8_t ddata, float adata)
+     * {
+     *   pc.printf("Data received.");
+     * }
+     *     
+     * uint16_t aid = DHN.registerActuator("LightSwitch", 0, &onLightSwitchMsg);
+     * @endcode
+     */    
+    uint16_t registerActuator(char *actuatorName, uint8_t type, void (*onReceive)(uint8_t, uint8_t, float));
+
+
+    /**
+     * Send digital data to a virtual sensor on devicehub.net
+     *
+     * @param sensorId sensor ID, coming from the registerSensor() function
+     * @param data sensor data. Should be 0 or 1 for digital devices
+     *
+     */    
     bool sendDigitalData(uint16_t sensorId, uint8_t data);
+
+    /**
+     * Send analog data to a virtual sensor on devicehub.net
+     *
+     * @param sensorId sensor ID, coming from the registerSensor() function
+     * @param data sensor data. Should be a float value for analog devices
+     *
+     */    
     bool sendAnalogData(uint16_t sensorId, float data);
+
+    /**@}*/
+
 };
 
 #endif
\ No newline at end of file