Socket API for library model. More...

Functions
int8_t	socket_open (uint8_t protocol, uint16_t identifier, void(passed_fptr)(void ))
	Create and initialize a socket for communication.
int8_t	socket_close (int8_t sid)
	A function to close a socket.
int8_t	socket_listen (int8_t socket, uint8_t backlog)
	A function to set a socket to listening mode.
int8_t	socket_accept (int8_t listen_socket_id, ns_address_t addr, void(passed_fptr)(void *))
	A function to accept a new connection on an socket.
int8_t	socket_shutdown (int8_t socket, uint8_t how)
	A function to shut down a connection.
int8_t	socket_getsockname (int8_t socket, ns_address_t *address)
	A function to read local address and port for a bound socket.
int8_t	socket_getpeername (int8_t socket, ns_address_t *address)
	A function to read remote address and port for a connected socket.
int16_t	socket_read (int8_t socket, ns_address_t src_addr, uint8_t buffer, uint16_t length)
	A function to read received data buffer from a socket.
int16_t	socket_recv (int8_t socket, void *buffer, uint16_t length, int flags)
	A function to read received data buffer from a socket,.
int16_t	socket_recvfrom (int8_t socket, void buffer, uint16_t length, int flags, ns_address_t src_addr)
	A function to read received data buffer from a socket.
int16_t	socket_recvmsg (int8_t socket, ns_msghdr_t *msg, int flags)
	A function to read received message with ancillary data from a socket.
int16_t	socket_sendmsg (int8_t socket, const ns_msghdr_t *msg, int flags)
	A function to send UDP, TCP or raw ICMP data via the socket with or without ancillary data or destination address.
int16_t	socket_sendto (int8_t socket, const ns_address_t address, const void buffer, uint16_t length)
	A function to send UDP, TCP or raw ICMP data via the socket.
int8_t	socket_connect (int8_t socket, ns_address_t *address, uint8_t randomly_take_src_number)
	A function to connect to remote peer (TCP).
int8_t	socket_bind (int8_t socket, const ns_address_t *address)
	Bind socket to address.
int8_t	socket_bind2addrsel (int8_t socket, const ns_address_t *dst_address)
	Bind a local address to a socket based on the destination address and the address selection preferences.
int16_t	socket_send (int8_t socket, const void *buffer, uint16_t length)
	Send data via a connected socket by client.
int8_t	socket_setsockopt (int8_t socket, uint8_t level, uint8_t opt_name, const void *opt_value, uint16_t opt_len)
	Set an option for a socket.
int8_t	socket_getsockopt (int8_t socket, uint8_t level, uint8_t opt_name, void opt_value, uint16_t opt_len)
	Get an option for a socket.
ns_cmsghdr_t *	NS_CMSG_NXTHDR (const ns_msghdr_t msgh, const ns_cmsghdr_t cmsg)
	Parse next control message from message by current control message header.
Variables
const uint8_t	ns_in6addr_any [16] = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}
	IPv6 wildcard address IN_ANY.

Detailed Description

Socket API for library model.

The socket API functions for library model

Definition in file socket_api.c.

Function Documentation

ns_cmsghdr_t* NS_CMSG_NXTHDR	(	const ns_msghdr_t *	msgh,
		const ns_cmsghdr_t *	cmsg
	)

Parse next control message from message by current control message header.

Parameters:

msgh	Pointer for socket message.
cmsg	Pointer for last parsed control message

Returns:: Pointer to Next control message header , Could be NULL when no more control messages data.

Definition at line 1182 of file socket_api.c.

int8_t socket_accept	(	int8_t	socket_id,
		ns_address_t *	addr,
		void()(void )	passed_fptr
	)

A function to accept a new connection on an socket.

Parameters:

socket_id	The socket ID of the listening socket.
addr	Either NULL pointer or pointer to structure where the remote address of the connecting host is copied.
passed_fptr	A function pointer to a function that is called whenever a data frame is received to the new socket.

Returns:: 0 or greater on success; return value is the new socket ID.; -1 on failure.; NS_EWOULDBLOCK if no pending connections.

Definition at line 141 of file socket_api.c.

int8_t socket_bind	(	int8_t	socket,
		const ns_address_t *	address
	)

Bind socket to address.

Used by the application to bind a socket to a port and/or an address. Binding of each of address and port can only be done once.

If address is ns_in6addr_any, the address binding is not changed. If port is 0, the port binding is not changed.

Parameters:

socket	Socket ID of the socket to bind.
address	Address structure containing the port and/or address to bind.

Returns:: 0 on success.; -1 if the given address is NULL.; -2 if the port is already bound to another socket.; -3 if address is not us.; -4 if the socket is already bound.; -5 bind is not supported on this type of socket.

Definition at line 619 of file socket_api.c.

int8_t socket_bind2addrsel	(	int8_t	socket,
		const ns_address_t *	dst_address
	)

Bind a local address to a socket based on the destination address and the address selection preferences.

Binding happens to the same address that socket_connect() would bind to. Reference: RFC5014 IPv6 Socket API for Source Address Selection.

Parameters:

socket	The socket ID.
dst_address	The destination address to which the socket wants to communicate.

Returns:: 0 on success.; -1 if the given address is NULL or socket ID is invalid.; -2 if the memory allocation failed.; -3 if the socket is already bound to address.; -4 if the interface cannot be found.; -5 if the source address selection fails.; -6 bind2addrsel is not supported on this type of socket.

Definition at line 669 of file socket_api.c.

int8_t socket_close ( int8_t socket )

A function to close a socket.

Parameters:

socket ID of the socket to be closed.

Returns:: 0 socket closed.; -1 socket not closed.

Definition at line 97 of file socket_api.c.

int8_t socket_connect	(	int8_t	socket,
		ns_address_t *	address,
		uint8_t	randomly_take_src_number
	)

A function to connect to remote peer (TCP).

Parameters:

socket	The socket ID.
address	The address of a remote peer.
randomly_take_src_number	Ignored - random local port is always chosen if not yet bound

Returns:: 0 on success.; -1 in case of an invalid socket ID or parameter.; -2 if memory allocation fails.; -3 if the socket is in listening state.; -4 if the socket is already connected.; -5 connect is not supported on this type of socket.; -6 if the TCP session state is wrong.; -7 if the source address selection fails.

Definition at line 529 of file socket_api.c.

int8_t socket_getpeername	(	int8_t	socket,
		ns_address_t *	address
	)

A function to read remote address and port for a connected socket.

Parameters:

socket	The socket ID.
address	A pointer to the address structure where the remote address information is written to.

Returns:: 0 on success.; -1 if no socket is found.; -2 if no socket is not connected.

Definition at line 274 of file socket_api.c.

int8_t socket_getsockname	(	int8_t	socket,
		ns_address_t *	address
	)

A function to read local address and port for a bound socket.

This call writes ns_in6addr_any if address is not bound and 0 if the port is not bound.

Parameters:

socket	The socket ID.
address	A pointer to the address structure where the local address information is written to.

Returns:: 0 on success.; -1 if no socket is found.

Definition at line 259 of file socket_api.c.

int8_t socket_getsockopt	(	int8_t	socket,
		uint8_t	level,
		uint8_t	opt_name,
		void *	opt_value,
		uint16_t *	opt_len
	)

Get an option for a socket.

Used to read miscellaneous options for a socket. Supported levels and names defined above. If the buffer is smaller than the option, the output is silently truncated; otherwise opt_len is modified to indicate the actual length.

Parameters:

socket	The socket ID.
level	The protocol level.
opt_name	The option name (interpretation depends on level). See OPTNAMES_IPV6.
opt_value	A pointer to output buffer.
opt_len	A pointer to length of output buffer; updated on exit.

Returns:: 0 on success.; -1 invalid socket ID.; -2 invalid/unsupported option.

Definition at line 1134 of file socket_api.c.

int8_t socket_listen	(	int8_t	socket,
		uint8_t	backlog
	)

A function to set a socket to listening mode.

Parameters:

socket	The socket ID.
backlog	The pending connections queue size.

Returns:: 0 on success.; -1 on failure.

Definition at line 108 of file socket_api.c.

int8_t socket_open	(	uint8_t	protocol,
		uint16_t	identifier,
		void()(void )	passed_fptr
	)

Create and initialize a socket for communication.

Parameters:

protocol	Defines the protocol to use.
identifier	The socket port. 0 indicates that port is not specified and it will be selected automatically when using the socket.
passed_fptr	A function pointer to a function that is called whenever a data frame is received to this socket.

Returns:: 0 or greater on success; Return value is the socket ID.; -1 on failure.; -2 on port reserved.

Definition at line 48 of file socket_api.c.

int16_t socket_read	(	int8_t	socket,
		ns_address_t *	src_addr,
		uint8_t *	buffer,
		uint16_t	length
	)

A function to read received data buffer from a socket.

Used by the application to get data from a socket. See socket_recvfrom() for more details.

This is equivalent to socket_recvfrom, except that it passes the flag NS_MSG_LEGACY0, which modifies the return behaviour for zero data.

Parameters:

socket	The socket ID.
src_addr	A pointer to a structure where the sender's address is stored. May be NULL if not required.
buffer	A pointer to an array where the read data is written to.
length	The maximum length of the allocated buffer.

Returns:: >0 indicates the length of the data copied to buffer.; 0 if no data was read (includes zero-length datagram, end of stream and no data currently available); -1 invalid input parameters.

Definition at line 380 of file socket_api.c.

int16_t socket_recv	(	int8_t	socket,
		void *	buffer,
		uint16_t	length,
		int	flags
	)

A function to read received data buffer from a socket,.

Equivalent to socket_recvfrom with src_address set to NULL.

Parameters:

socket	The socket ID.
buffer	A pointer to an array where the read data is written to.
length	The maximum length of the allocated buffer.
flags	Flags for read call

Returns:: as for socket_recvfrom

Definition at line 385 of file socket_api.c.

int16_t socket_recvfrom	(	int8_t	socket,
		void *	buffer,
		uint16_t	length,
		int	flags,
		ns_address_t *	src_addr
	)

A function to read received data buffer from a socket.

Used by the application to get data from a socket.

This has two modes of operation.

1) For non-stream sockets, if the receive queue is disabled (set to 0 via SOCKET_SO_RCVBUF), which is the non-stream default and original Nanostack behaviour, then applications receive exactly one SOCKET_DATA callback per datagram, indicating that datagram's length. They must make 1 read call in that callback, and they will be given the data. If not read, the datagram is discarded on return from the callback.

2) Otherwise - stream sockets or SOCKET_SO_RCVBUF non-zero - behaviour is akin to traditional BSD. SOCKET_DATA callbacks occur when new data arrives, and read calls can be made any time. Data will be queued to an extent determined by the receive buffer size. The length in the data callback is the total amount of data in the receive queue - possibly multiple datagrams.

Parameters:

socket	The socket ID.
buffer	A pointer to an array where the read data is written to.
length	The maximum length of the allocated buffer.
flags	Flags for read call
src_addr	A pointer to a structure where the sender's address is stored. May be NULL if not required.

The returned length is normally the length of data actually written to the buffer; if NS_MSG_TRUNC is set in flags, then for non-stream sockets, the actual datagram length is returned instead, which may be larger than the buffer size.

Return values assume flag NS_MSG_LEGACY0 is not set - if it is set, they are as per socket_read().

Returns:: >0 indicates the length of the data copied to buffer (or original datagram size); 0 if end of stream or zero-length datagram; -1 invalid input parameters.; NS_EWOULDBLOCK if no data is currently available

Definition at line 390 of file socket_api.c.

int16_t socket_recvmsg	(	int8_t	socket,
		ns_msghdr_t *	msg,
		int	flags
	)

A function to read received message with ancillary data from a socket.

Used by the application to get data from a socket. See socket_recvfrom for details of the two delivery mechanisms.

Ancillary data must request by socket_setsockopt().

msg->msg_controllen is updated to indicate actual length of ancillary data output

Parameters:

socket	The socket ID.
msg	A pointer to a structure where messages is stored with or without ancillary data
flags	A flags for message read.

Returns:: as for socket_recvfrom

Validate socket id

Validate message payload buffer size

Write Ancillary

Definition at line 423 of file socket_api.c.

int16_t socket_send	(	int8_t	socket,
		const void *	buffer,
		uint16_t	length
	)

Send data via a connected socket by client.

Note: The socket connection must be ready before using this function. The stack uses automatically the address of the remote connected host as the destination address for the packet.

This call is equivalent to socket_sendto() with address set to NULL - see that call for more details.

Parameters:

socket	The socket ID.
buffer	A pointer to data.
length	Data length.

Definition at line 721 of file socket_api.c.

int16_t socket_sendmsg	(	int8_t	socket,
		const ns_msghdr_t *	msg,
		int	flags
	)

A function to send UDP, TCP or raw ICMP data via the socket with or without ancillary data or destination address.

Used by the application to send data message header support also vector list socket_send() and socket_sendto() use this functionality internally.

Parameters:

socket	The socket ID.
msg	A pointer to the Message header which include address, payload and ancillary data.
flags	A flags for message send (eg NS_MSG_LEGACY0)

Messages destination address is defined by msg->msg_name which must be ns_address_t. If msg->msg_nme is NULL socket select connected address

Messages payload and length is defined msg->msg_iov and msg->msg_iovlen. API support to send multiple data vector.

Supported ancillary data for send defined by msg->msg_control and msg->msg_controllen.

msg->msg_flags is unused, and need not be initialised.

The following main return values assume flag NS_MSG_LEGACY0 is not set - if it is set, they are as per socket_sendto().

Returns:: length if entire amount written (which could be 0); value >0 and <length if partial amount written (stream only); NS_EWOULDBLOCK if nothing written due to lack of queue space.

Error returns:

Returns:: -1 Invalid socket ID.; -2 Socket memory allocation fail.; -3 TCP state not established or address scope not defined .; -4 Unknown interface.; -5 Socket not connected; -6 Packet too short (ICMP raw socket error).

Definition at line 499 of file socket_api.c.

int16_t socket_sendto	(	int8_t	socket,
		const ns_address_t *	address,
		const void *	buffer,
		uint16_t	length
	)

A function to send UDP, TCP or raw ICMP data via the socket.

Used by the application to send data.

The return of 0 on success is unconventional, and obtained by passing NS_MSG_LEGACY0 to socket_sendmsg internally - to get conventional return values, you can use socket_sendmsg() instead.

Parameters:

socket	The socket ID.
address	A pointer to the destination address information.
buffer	A pointer to data to be sent.
length	Length of the data to be sent.

Returns:: 0 On success (whole packet queued); NS_EWOULDBLOCK if nothing written due to lack of queue space.

Error returns:

Returns:: -1 Invalid socket ID.; -2 Socket memory allocation fail.; -3 TCP state not established or address scope not defined .; -4 Unknown interface.; -5 Socket not connected; -6 Packet too short (ICMP raw socket error).

Definition at line 508 of file socket_api.c.

int8_t socket_setsockopt	(	int8_t	socket,
		uint8_t	level,
		uint8_t	opt_name,
		const void *	opt_value,
		uint16_t	opt_len
	)

Set an option for a socket.

Used to specify miscellaneous options for a socket. Supported levels and names defined above.

Parameters:

socket	The socket ID.
level	The protocol level.
opt_name	The option name (interpretation depends on level). See OPTNAMES_SOCKET and OPTNAMES_IPV6.
opt_value	A pointer to value for the specified option.
opt_len	Size of the data pointed to by the value.

Returns:: 0 on success.; -1 invalid socket ID.; -2 invalid/unsupported option.; -3 invalid option value.

Definition at line 957 of file socket_api.c.

int8_t socket_shutdown	(	int8_t	socket,
		uint8_t	how
	)

A function to shut down a connection.

Parameters:

socket	The ID of the socket to be shut down.
how	How socket is to be shut down, one of SOCKET_SHUT_XX.

Returns:: 0 on success.; -1 if the given socket ID is not found, if the socket type is wrong or TCP layer returns a failure.; -2 if socket is not connected.

Definition at line 189 of file socket_api.c.

Variable Documentation

const uint8_t ns_in6addr_any[16] = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}

IPv6 wildcard address IN_ANY.

Definition at line 46 of file socket_api.c.

Type:	Program
Mbed OS support:	Mbed OS
Created:	29 Mar 2018
Imports:	22
Forks:	0
Commits:	5
Dependents:	0
Dependencies:	0
Followers:	6

socket_api.c File Reference

Functions

Variables

Detailed Description

Function Documentation

Variable Documentation

Repository toolbox

Repository details

Important Information for this Arm website

socket_api.c File Reference

Functions

Variables

Detailed Description

Function Documentation

Variable Documentation

Repository toolbox

Repository details

Important Information for this Arm website

Access Warning