This is a simple mbed client example demonstrating, registration of a device with mbed Device Connector and reading and writing values as well as deregistering on different Network Interfaces including Ethernet, WiFi, 6LoWPAN ND and Thread respectively.

Fork of mbed-os-example-client by mbed-os-examples

Committer:
mbed_official
Date:
Wed Aug 03 12:00:18 2016 +0100
Revision:
9:dcc4b552c03a
Parent:
7:9a1ee269650b
Child:
12:7da135488950
Merge pull request #64 from hasnainvirk/master

Doc Update

Commit copied from https://github.com/ARMmbed/mbed-os-example-client

Who changed what in which revision?

UserRevisionLine numberNew contents of line
Yogesh Pande 0:7d5ec759888b 1 # Getting started with mbed Client on mbed OS
Yogesh Pande 0:7d5ec759888b 2
Yogesh Pande 0:7d5ec759888b 3 This is the mbed Client example for mbed OS (we also have one for [Linux](https://github.com/ARMmbed/mbed-client-linux-example)). It demonstrates how to register a device with mbed Device Connector, how to read and write values, and how to deregister. If you are unfamiliar with mbed Device Connector, we recommend that you read [the introduction to the data model](https://docs.mbed.com/docs/mbed-device-connector-web-interfaces/en/latest/#the-mbed-device-connector-data-model) first.
Yogesh Pande 0:7d5ec759888b 4
Yogesh Pande 0:7d5ec759888b 5 The application:
Yogesh Pande 0:7d5ec759888b 6
Yogesh Pande 0:7d5ec759888b 7 * Connects to network with WiFi, Ethernet, 6LoWPAN ND or Thread connection.
Yogesh Pande 0:7d5ec759888b 8 * Registers with mbed Device Connector.
Yogesh Pande 0:7d5ec759888b 9 * Gives mbed Device Connector access to its resources (read and write).
Yogesh Pande 0:7d5ec759888b 10 * Records the number of clicks on the device’s button and sends the number to mbed Device Connector.
Yogesh Pande 0:7d5ec759888b 11 * Lets you control the blink pattern of the LED on the device (through mbed Device Connector).
Yogesh Pande 0:7d5ec759888b 12
Yogesh Pande 0:7d5ec759888b 13 ## Required hardware
Yogesh Pande 0:7d5ec759888b 14
Yogesh Pande 0:7d5ec759888b 15 * [FRDM-K64F](http://developer.mbed.org/platforms/frdm-k64f/) board.
Yogesh Pande 0:7d5ec759888b 16 * 1-2 micro-USB cables.
Yogesh Pande 0:7d5ec759888b 17 * [mbed 6LoWPAN gateway router](https://firefly-iot.com/product/firefly-6lowpan-gateway-2-4ghz/) for 6LoWPAN ND and Thread.
Yogesh Pande 0:7d5ec759888b 18 * mbed 6LoWPAN shield (AT86RF212B/[AT86RF233](https://firefly-iot.com/product/firefly-arduino-shield-2-4ghz/)) for 6LoWPAN ND and Thread.
Yogesh Pande 0:7d5ec759888b 19 * Ethernet cable and connection to the internet.
Yogesh Pande 0:7d5ec759888b 20
mbed_official 7:9a1ee269650b 21 ## Requirements for non K64F board
mbed_official 7:9a1ee269650b 22 This example application is primarily designed for FRDM-K64F board but you can also use other mbed OS supported boards to run this example application , with some minor modifications for setup.
mbed_official 7:9a1ee269650b 23 * To get the application registering successfully on non K64F boards , you need Edit the `mbed_app.json` file to add `NULL_ENTROPY` feature for mbedTLS:
mbed_official 7:9a1ee269650b 24
mbed_official 7:9a1ee269650b 25 ```
mbed_official 7:9a1ee269650b 26 ""macros": ["MBEDTLS_USER_CONFIG_FILE=\"mbedtls_mbed_client_config.h\"",
mbed_official 7:9a1ee269650b 27 "MBEDTLS_NO_DEFAULT_ENTROPY_SOURCES",
mbed_official 7:9a1ee269650b 28 "MBEDTLS_TEST_NULL_ENTROPY"],
mbed_official 7:9a1ee269650b 29 ```
mbed_official 7:9a1ee269650b 30 * On non K64F boards, there is no unregistration functionality and button press is simulated through timer ticks incrementing every 15 seconds.
mbed_official 7:9a1ee269650b 31
Yogesh Pande 0:7d5ec759888b 32 ## Required software
Yogesh Pande 0:7d5ec759888b 33
Yogesh Pande 0:7d5ec759888b 34 * [ARM mbed account](https://developer.mbed.org/account/login/?next=/).
Yogesh Pande 0:7d5ec759888b 35 * [mbed-cli](https://github.com/ARMmbed/mbed-cli) - to build the example programs. To learn how to build mbed OS applications with mbed-cli, see [the user guide](https://github.com/ARMmbed/mbed-cli/blob/master/README.md).
Yogesh Pande 0:7d5ec759888b 36 * [Serial port monitor](https://developer.mbed.org/handbook/SerialPC#host-interface-and-terminal-applications).
Yogesh Pande 0:7d5ec759888b 37
Yogesh Pande 0:7d5ec759888b 38 ## Application setup
Yogesh Pande 0:7d5ec759888b 39
Yogesh Pande 0:7d5ec759888b 40 To configure the example application, please:
Yogesh Pande 0:7d5ec759888b 41
Yogesh Pande 0:7d5ec759888b 42 1. [Select the connection type](#connection-type).
Yogesh Pande 0:7d5ec759888b 43 1. [Set the client credentials](#client-credentials).
Yogesh Pande 0:7d5ec759888b 44 1. [Change 6LoWPAN ND & Thread settings](#6lowpan-nd-and-thread-settings).
Yogesh Pande 0:7d5ec759888b 45 1. [Change Ethernet settings](#ethernet-settings).
Yogesh Pande 0:7d5ec759888b 46 1. [Change Wi-Fi settings](#wi-fi-settings).
Yogesh Pande 0:7d5ec759888b 47 1. [Set up an IP address](#ip-address-setup). This step is optional.
Yogesh Pande 0:7d5ec759888b 48 1. [Change the socket type](#changing-socket-type). This step is optional.
Yogesh Pande 0:7d5ec759888b 49
Yogesh Pande 0:7d5ec759888b 50 ### Connection type
Yogesh Pande 0:7d5ec759888b 51
Yogesh Pande 0:7d5ec759888b 52 The application uses Ethernet as the default connection type. To change the connection type, set one of them in `mbed_app.json`. For example, to enable 6LoWPAN ND mode:
Yogesh Pande 0:7d5ec759888b 53
Yogesh Pande 0:7d5ec759888b 54 ```json
Yogesh Pande 0:7d5ec759888b 55 "network-interface": {
Yogesh Pande 0:7d5ec759888b 56 "help": "options are ETHERNET,WIFI,MESH_LOWPAN_ND,MESH_THREAD.",
Yogesh Pande 0:7d5ec759888b 57 "value": "MESH_LOWPAN_ND"
Yogesh Pande 0:7d5ec759888b 58 }
Yogesh Pande 0:7d5ec759888b 59 ```
Yogesh Pande 0:7d5ec759888b 60
Yogesh Pande 0:7d5ec759888b 61 ### Client credentials
Yogesh Pande 0:7d5ec759888b 62
Yogesh Pande 0:7d5ec759888b 63 To register the application to the Connector service, you need to create and set the client side certificate.
Yogesh Pande 0:7d5ec759888b 64
Yogesh Pande 0:7d5ec759888b 65 1. Go to [mbed Device Connector](https://connector.mbed.com) and log in with your mbed account.
Yogesh Pande 0:7d5ec759888b 66 1. On mbed Device Connector, go to [My Devices > Security credentials](https://connector.mbed.com/#credentials) and click the **Get my device security credentials** button to get new credentials for your device.
Yogesh Pande 0:7d5ec759888b 67 1. Replace the contents in `security.h` of this project's directory with content copied above.
Yogesh Pande 0:7d5ec759888b 68
Yogesh Pande 0:7d5ec759888b 69 ### 6LoWPAN ND and Thread settings
Yogesh Pande 0:7d5ec759888b 70
Yogesh Pande 1:e06e899acba6 71 First you need to select the RF driver to be used by 6LoWPAN/Thread stack.
Yogesh Pande 1:e06e899acba6 72
Yogesh Pande 1:e06e899acba6 73 For example Atmel AT86RF233/212B driver is located in https://github.com/ARMmbed/atmel-rf-driver
Yogesh Pande 1:e06e899acba6 74
Yogesh Pande 1:e06e899acba6 75 To add that driver to you application from command line, call: `mbed add https://github.com/ARMmbed/atmel-rf-driver`
Yogesh Pande 1:e06e899acba6 76
Yogesh Pande 1:e06e899acba6 77 Then you need to enable the IPV6 functionality as the 6LoWPAN and Thread are part of IPv6 stack. Edit the `mbed_app.json` file to add `IPV6` feature:
Yogesh Pande 1:e06e899acba6 78
Yogesh Pande 1:e06e899acba6 79 ```
Yogesh Pande 1:e06e899acba6 80 "target.features_add": ["CLIENT", "IPV6", "COMMON_PAL"],
Yogesh Pande 1:e06e899acba6 81 ```
Yogesh Pande 1:e06e899acba6 82
Yogesh Pande 0:7d5ec759888b 83 6LoWPAN ND and Thread use IPv6 for connectivity. Therefore, you need to verify first that you have a working IPv6 connection. To do that, ping the Connector IPv6 address `2607:f0d0:2601:52::20` from your network.
Yogesh Pande 0:7d5ec759888b 84
mbed_official 6:8fff223f3f84 85 **NOTE:** If you are using [k64f-border-router](https://github.com/ARMmbed/k64f-border-router) (which can be used only as a 6LoWPAN BR and only with FRDM-K64F), you need to enable another security feature. By default, k64f-border-router uses `PSK` as security. You can either enable security here on your mbed-os-example-client application, e.g.,
mbed_official 6:8fff223f3f84 86
mbed_official 6:8fff223f3f84 87 ```json
mbed_official 6:8fff223f3f84 88 "target_overrides": {
mbed_official 6:8fff223f3f84 89 "*": {
mbed_official 6:8fff223f3f84 90 "mbed-mesh-api.6lowpan-nd-security-mode": "PSK",
mbed_official 6:8fff223f3f84 91 }
mbed_official 6:8fff223f3f84 92 }
mbed_official 6:8fff223f3f84 93 ```
mbed_official 6:8fff223f3f84 94 or you can remove link layer security from k64f-border-router. For doing that, change the [mbed_app.json](https://github.com/ARMmbed/k64f-border-router/blob/master/mbed_app.json) fetched from k64f-border-router repository, e.g.,
mbed_official 6:8fff223f3f84 95
mbed_official 6:8fff223f3f84 96 ```json
mbed_official 6:8fff223f3f84 97 "config": {
mbed_official 6:8fff223f3f84 98 "security-mode": "NONE",
mbed_official 6:8fff223f3f84 99 }
mbed_official 6:8fff223f3f84 100 ```
Yogesh Pande 0:7d5ec759888b 101 #### mbed gateway
Yogesh Pande 0:7d5ec759888b 102
Yogesh Pande 0:7d5ec759888b 103 To connect the example application in 6LoWPAN ND or Thread mode to Connector, you need to set up an mbed 6LoWPAN gateway router as follows:
Yogesh Pande 0:7d5ec759888b 104
Yogesh Pande 0:7d5ec759888b 105 1. Use an Ethernet cable to connect the mbed 6LoWPAN gateway router to the internet.
Yogesh Pande 0:7d5ec759888b 106 2. Use a micro-USB cable to connect the mbed 6LoWPAN gateway router to your computer. The computer will list the router as removable storage.
Yogesh Pande 0:7d5ec759888b 107 3. The firmware for the gateway is located in the `GW_Binary` folder in the root of this example. Select the binary matching your application bootstrap mode:
Yogesh Pande 0:7d5ec759888b 108
Yogesh Pande 0:7d5ec759888b 109 * For the **6LoWPAN ND** bootstrap, use `gateway6LoWPANDynamic.bin`.
Yogesh Pande 0:7d5ec759888b 110 * For the **Thread** bootstrap, use `gatewayThreadDynamic.bin`.
Yogesh Pande 0:7d5ec759888b 111
Yogesh Pande 0:7d5ec759888b 112 The dynamic binaries use IPv6 autoconfiguration and enable the client to connect to the Connector service. The static binaries create a site-local IPv6 network and packets cannot be routed outside.
Yogesh Pande 0:7d5ec759888b 113
Yogesh Pande 0:7d5ec759888b 114 4. Copy the gateway binary file to the mbed 6LoWPAN gateway router to flash the device. The device reboots automatically after flashing. If that does not happen, press the **Reset** button on the board.
Yogesh Pande 0:7d5ec759888b 115
Yogesh Pande 0:7d5ec759888b 116 You can view debug traces from the gateway with a serial port monitor. The gateway uses baud rate 460800. The gateway IPv6 address is correctly configured when the following trace is visible: `Eth bootstrap ready, IP=XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX`.
Yogesh Pande 0:7d5ec759888b 117
Yogesh Pande 0:7d5ec759888b 118 #### Channel settings
Yogesh Pande 0:7d5ec759888b 119
Yogesh Pande 0:7d5ec759888b 120 The default 2.4GHz channel settings are already defined by the [mbed-mesh-api](https://github.com/ARMmbed/mbed-mesh-api) to match the mbed gateway settings. The application can override these settings by adding them to the `mbed_app.json` file in the main project directory. For example:
Yogesh Pande 0:7d5ec759888b 121
Yogesh Pande 0:7d5ec759888b 122 ```json
Yogesh Pande 0:7d5ec759888b 123 "target_overrides": {
Yogesh Pande 0:7d5ec759888b 124 "*": {
Yogesh Pande 0:7d5ec759888b 125 "mbed-mesh-api.6lowpan-nd-channel-page": 0,
Yogesh Pande 0:7d5ec759888b 126 "mbed-mesh-api.6lowpan-nd-channel": 12,
Yogesh Pande 0:7d5ec759888b 127 "mbed-mesh-api.thread-config-channel-page": 0,
Yogesh Pande 0:7d5ec759888b 128 "mbed-mesh-api.thread-config-channel": 12
Yogesh Pande 0:7d5ec759888b 129 }
Yogesh Pande 0:7d5ec759888b 130 }
Yogesh Pande 0:7d5ec759888b 131 ```
Yogesh Pande 0:7d5ec759888b 132
Yogesh Pande 0:7d5ec759888b 133 For sub-GHz shields (AT86RF212B) use the following overrides, **6LoWPAN ND only**:
Yogesh Pande 0:7d5ec759888b 134
Yogesh Pande 0:7d5ec759888b 135 ```json
Yogesh Pande 0:7d5ec759888b 136 "mbed-mesh-api.6lowpan-nd-channel-page": 2,
Yogesh Pande 0:7d5ec759888b 137 "mbed-mesh-api.6lowpan-nd-channel": 1
Yogesh Pande 0:7d5ec759888b 138 ```
Yogesh Pande 0:7d5ec759888b 139
Yogesh Pande 0:7d5ec759888b 140 For more information about the radio shields, see [the related documentation](docs/radio_module_identify.md). All the configurable settings can be found in the `mbed-os-example-client/mbed-os/features/FEATURE_IPV6/mbed-mesh-api/mbed_lib.json` file.
Yogesh Pande 0:7d5ec759888b 141
Yogesh Pande 0:7d5ec759888b 142 #### Thread-specific settings
Yogesh Pande 0:7d5ec759888b 143
Yogesh Pande 0:7d5ec759888b 144 With Thread, you can change the operating mode of the client from the default router mode to a sleepy end device by adding the following override to the `mbed_app.json` file:
Yogesh Pande 0:7d5ec759888b 145
Yogesh Pande 0:7d5ec759888b 146 ```json
Yogesh Pande 0:7d5ec759888b 147 "mbed-mesh-api.thread-device-type": "MESH_DEVICE_TYPE_THREAD_SLEEPY_END_DEVICE"
Yogesh Pande 0:7d5ec759888b 148 ```
Yogesh Pande 0:7d5ec759888b 149
Yogesh Pande 0:7d5ec759888b 150 ### Ethernet settings
Yogesh Pande 0:7d5ec759888b 151
Yogesh Pande 0:7d5ec759888b 152 For running the example application using Ethernet, you need:
Yogesh Pande 0:7d5ec759888b 153
Yogesh Pande 0:7d5ec759888b 154 - An Ethernet cable.
Yogesh Pande 0:7d5ec759888b 155 - An Ethernet connection to the internet.
Yogesh Pande 0:7d5ec759888b 156
Yogesh Pande 0:7d5ec759888b 157 ### Wi-Fi settings
Yogesh Pande 0:7d5ec759888b 158
Yogesh Pande 0:7d5ec759888b 159 The example application uses ESP8266 WiFi Interface for managing the wireless connectivity. To run this application using WiFi, you need:
Yogesh Pande 0:7d5ec759888b 160
Yogesh Pande 0:7d5ec759888b 161 1. An [ESP8266](https://en.wikipedia.org/wiki/ESP8266) WiFi module
Yogesh Pande 0:7d5ec759888b 162 1. Updated [Espressif Firmware](https://developer.mbed.org/teams/ESP8266/wiki/Firmware-Update)
Yogesh Pande 0:7d5ec759888b 163 1. Mount the WiFi module onto [K64F Grove Shield v2](https://developer.mbed.org/platforms/FRDM-K64F/#supported-seeed-studio-grove-extension)
Yogesh Pande 0:7d5ec759888b 164 1. Attach the shield on the K64F board.
Yogesh Pande 0:7d5ec759888b 165 1. In the `mbed_app.json` file, change
Yogesh Pande 0:7d5ec759888b 166 ```json
Yogesh Pande 0:7d5ec759888b 167 "network-interface": {
Yogesh Pande 0:7d5ec759888b 168 "help": "options are ETHERNET,WIFI,MESH_LOWPAN_ND,MESH_THREAD.",
Yogesh Pande 0:7d5ec759888b 169 "value": "WIFI"
Yogesh Pande 0:7d5ec759888b 170 }
Yogesh Pande 0:7d5ec759888b 171 ```
Yogesh Pande 0:7d5ec759888b 172
Yogesh Pande 0:7d5ec759888b 173 Provide your WiFi SSID and password here and leave `\"` in the beginning and end of your SSID and password (as shown in the example below). Otherwise, the example cannot pick up the SSID and password in correct format.
Yogesh Pande 0:7d5ec759888b 174 ```json
Yogesh Pande 0:7d5ec759888b 175 "wifi-ssid": {
Yogesh Pande 0:7d5ec759888b 176 "help": "WiFi SSID",
Yogesh Pande 0:7d5ec759888b 177 "value": "\"SSID\""
Yogesh Pande 0:7d5ec759888b 178 },
Yogesh Pande 0:7d5ec759888b 179 "wifi-password": {
Yogesh Pande 0:7d5ec759888b 180 "help": "WiFi Password",
Yogesh Pande 0:7d5ec759888b 181 "value": "\"Password\""
Yogesh Pande 0:7d5ec759888b 182 }
Yogesh Pande 0:7d5ec759888b 183 ```
Yogesh Pande 0:7d5ec759888b 184
Yogesh Pande 0:7d5ec759888b 185 ### IP address setup
Yogesh Pande 0:7d5ec759888b 186
Yogesh Pande 0:7d5ec759888b 187 This example uses IPv4 to communicate with the [mbed Device Connector Server](https://api.connector.mbed.com) except for 6LoWPAN ND and Thread. The example program should automatically get an IPv4 address from the router when connected over Ethernet.
Yogesh Pande 0:7d5ec759888b 188
Yogesh Pande 0:7d5ec759888b 189 If your network does not have DHCP enabled, you have to manually assign a static IP address to the board. We recommend having DHCP enabled to make everything run smoothly.
Yogesh Pande 0:7d5ec759888b 190
Yogesh Pande 0:7d5ec759888b 191 ### Changing socket type
Yogesh Pande 0:7d5ec759888b 192
Yogesh Pande 0:7d5ec759888b 193 Your device can connect to mbed Device Connector via UDP or TCP binding mode. The default is UDP. The binding mode cannot be changed in 6LoWPAN ND or Thread mode.
Yogesh Pande 0:7d5ec759888b 194
Yogesh Pande 0:7d5ec759888b 195 To change the binding mode:
Yogesh Pande 0:7d5ec759888b 196
Yogesh Pande 0:7d5ec759888b 197 1. In the `simpleclient.h` file, find the parameter `SOCKET_MODE`. The default is `M2MInterface::UDP`.
Yogesh Pande 0:7d5ec759888b 198 1. To switch to TCP, change it to `M2MInterface::TCP`.
Yogesh Pande 0:7d5ec759888b 199 1. Rebuild and flash the application.
Yogesh Pande 0:7d5ec759888b 200
Yogesh Pande 0:7d5ec759888b 201 <span class="tips">**Tip:** The instructions in this document remain the same, irrespective of the socket mode you select.</span>
Yogesh Pande 0:7d5ec759888b 202
Yogesh Pande 0:7d5ec759888b 203 ## Building the example
Yogesh Pande 0:7d5ec759888b 204
Yogesh Pande 0:7d5ec759888b 205 To build the example application:
Yogesh Pande 0:7d5ec759888b 206
Yogesh Pande 0:7d5ec759888b 207 1. Clone [this](https://github.com/ARMmbed/mbed-os-example-client) repository.
Yogesh Pande 0:7d5ec759888b 208 1. Open a command line tool and navigate to the project’s directory.
Yogesh Pande 0:7d5ec759888b 209 1. Update mbed-os sources using the `mbed update` command.
Yogesh Pande 0:7d5ec759888b 210 1. [Configure](#application-setup) the client application.
Yogesh Pande 0:7d5ec759888b 211 1. Build the application by selecting the hardware board and build the toolchain using the command `mbed compile -m K64F -t GCC_ARM -c -j0`. mbed-cli builds a binary file under the project’s `.build` directory.
Yogesh Pande 0:7d5ec759888b 212 1. Plug the Ethernet cable into the board if you are using Ethernet mode.
Yogesh Pande 0:7d5ec759888b 213 1. If you are using 6LoWPAN ND or Thread mode, connect and power on the gateway first.
Yogesh Pande 0:7d5ec759888b 214 1. Plug the micro-USB cable into the **OpenSDA** port. The board is listed as a mass-storage device.
Yogesh Pande 0:7d5ec759888b 215 1. Drag the binary `.build/K64F/GCC_ARM/mbed-os-example-client.bin` to the board to flash the application.
Yogesh Pande 0:7d5ec759888b 216 1. The board is automatically programmed with the new binary. A flashing LED on it indicates that it is still working. When the LED stops blinking, the board is ready to work.
Yogesh Pande 0:7d5ec759888b 217 1. Press the **RESET** button on the board to run the program.
Yogesh Pande 0:7d5ec759888b 218 1. For verification, continue to the [Monitoring the application](#monitoring-the-application) chapter.
Yogesh Pande 0:7d5ec759888b 219
Yogesh Pande 0:7d5ec759888b 220
Yogesh Pande 0:7d5ec759888b 221 ## Monitoring the application
Yogesh Pande 0:7d5ec759888b 222
Yogesh Pande 0:7d5ec759888b 223 The application prints debug messages over the serial port, so you can monitor its activity with a serial port monitor. The application uses baud rate 115200.
Yogesh Pande 0:7d5ec759888b 224
Yogesh Pande 0:7d5ec759888b 225 <span class="notes">**Note:** Instructions to set this up are located [here](https://developer.mbed.org/handbook/SerialPC#host-interface-and-terminal-applications).</span>
Yogesh Pande 0:7d5ec759888b 226
Yogesh Pande 0:7d5ec759888b 227 After connecting, you should see messages about connecting to mbed Device Connector:
Yogesh Pande 0:7d5ec759888b 228
Yogesh Pande 0:7d5ec759888b 229 ```
mbed_official 5:b7d7ca715fdb 230 Starting mbed Client example...
mbed_official 5:b7d7ca715fdb 231 Using <Network Interface>
mbed_official 5:b7d7ca715fdb 232
mbed_official 5:b7d7ca715fdb 233 Connected to Network successfully
mbed_official 5:b7d7ca715fdb 234 IP address xxx.xxx.xxx.xxx
mbed_official 5:b7d7ca715fdb 235
mbed_official 5:b7d7ca715fdb 236 SOCKET_MODE : UDP
mbed_official 5:b7d7ca715fdb 237 Connecting to coap://api.connector.mbed.com:5684
mbed_official 5:b7d7ca715fdb 238
Yogesh Pande 0:7d5ec759888b 239 ```
Yogesh Pande 0:7d5ec759888b 240
Yogesh Pande 0:7d5ec759888b 241 <span class="notes">**Note:** Device name is the endpoint name you will need later on when [testing the application](https://github.com/ARMmbed/mbed-os-example-client#testing-the-application) chapter.</span>
Yogesh Pande 0:7d5ec759888b 242
Yogesh Pande 0:7d5ec759888b 243 When you click the `SW2` button on your board you should see messages about the value changes:
Yogesh Pande 0:7d5ec759888b 244
Yogesh Pande 0:7d5ec759888b 245 ```
Yogesh Pande 0:7d5ec759888b 246 handle_button_click, new value of counter is 1
Yogesh Pande 0:7d5ec759888b 247 ```
Yogesh Pande 0:7d5ec759888b 248
Yogesh Pande 0:7d5ec759888b 249 ## Testing the application
Yogesh Pande 0:7d5ec759888b 250
Yogesh Pande 0:7d5ec759888b 251 1. Flash the application.
Yogesh Pande 0:7d5ec759888b 252 1. Verify that the registration succeeded. You should see `Registered object successfully!` printed to the serial port.
Yogesh Pande 0:7d5ec759888b 253 1. On mbed Device Connector, go to [My devices > Connected devices](https://connector.mbed.com/#endpoints). Your device should be listed here.
Yogesh Pande 0:7d5ec759888b 254 1. Press the `SW2` button on the device a number of times (make a note of how many times you did that).
Yogesh Pande 0:7d5ec759888b 255 1. Go to [Device Connector > API Console](https://connector.mbed.com/#console).
Yogesh Pande 0:7d5ec759888b 256 1. Enter `https://api.connector.mbed.com/endpoints/DEVICE_NAME/3200/0/5501` in the URI field and click **TEST API**. Replace `DEVICE_NAME` with your actual endpoint name. The device name can be found in the `security.h` file, see variable `MBED_ENDPOINT_NAME` or it can be found from the traces [Monitoring the application](https://github.com/ARMmbed/mbed-os-example-client#monitoring-the-application).
Yogesh Pande 0:7d5ec759888b 257 1. The number of times you pressed `SW2` is shown.
Yogesh Pande 0:7d5ec759888b 258 1. Press the `SW3` button to unregister from mbed Device Connector. You should see `Unregistered Object Successfully` printed to the serial port and the LED starts blinking. This will also stop your application. Press the `RESET` button to run the program again.
Yogesh Pande 0:7d5ec759888b 259
mbed_official 5:b7d7ca715fdb 260 <span class="notes">**Note:** On non K64F boards, there is no unregistration functionality and button press is simulated through timer ticks incrementing every 15 seconds.</span>
Yogesh Pande 0:7d5ec759888b 261
Yogesh Pande 0:7d5ec759888b 262 ![SW2 pressed five times, as shown by the API Console](clicks.png)
Yogesh Pande 0:7d5ec759888b 263
Yogesh Pande 0:7d5ec759888b 264 <span class="tips">**Tip:** If you get an error, for example `Server Response: 410 (Gone)`, clear your browser's cache, log out, and log back in.</span>
Yogesh Pande 0:7d5ec759888b 265
Yogesh Pande 0:7d5ec759888b 266 <span class="notes">**Note:** Only GET methods can be executed through [Device Connector > API Console](https://connector.mbed.com/#console). For other methods check the [mbed Device Connector Quick Start](https://github.com/ARMmbed/mbed-connector-api-node-quickstart).
Yogesh Pande 0:7d5ec759888b 267
Yogesh Pande 0:7d5ec759888b 268 ### Application resources
Yogesh Pande 0:7d5ec759888b 269
Yogesh Pande 0:7d5ec759888b 270 The application exposes three [resources](https://docs.mbed.com/docs/mbed-device-connector-web-interfaces/en/latest/#the-mbed-device-connector-data-model):
Yogesh Pande 0:7d5ec759888b 271
Yogesh Pande 0:7d5ec759888b 272 1. `3200/0/5501`. Number of presses of SW2 (GET).
Yogesh Pande 0:7d5ec759888b 273 2. `3201/0/5850`. Blink function, blinks `LED1` when executed (POST).
Yogesh Pande 0:7d5ec759888b 274 3. `3201/0/5853`. Blink pattern, used by the blink function to determine how to blink. In the format of `1000:500:1000:500:1000:500` (PUT).
Yogesh Pande 0:7d5ec759888b 275
Yogesh Pande 0:7d5ec759888b 276 For information on how to get notifications when resource 1 changes, or how to use resources 2 and 3, take a look at the [mbed Device Connector Quick Start](https://github.com/ARMmbed/mbed-connector-api-node-quickstart).
Yogesh Pande 0:7d5ec759888b 277
mbed_official 9:dcc4b552c03a 278
mbed_official 9:dcc4b552c03a 279 ## Known Issues
mbed_official 9:dcc4b552c03a 280
mbed_official 9:dcc4b552c03a 281 If you are using MESH_THREAD as the network interface, once your client device joins the Thread Border Router and you hard reset the client device using reset button, the client device will not be able to join the network again and you will see a warning:
mbed_official 9:dcc4b552c03a 282
mbed_official 9:dcc4b552c03a 283 ```
mbed_official 9:dcc4b552c03a 284 [WARN][mleS]: dropping packet because mle frame counter is not higher
mbed_official 9:dcc4b552c03a 285 ```
mbed_official 9:dcc4b552c03a 286
mbed_official 9:dcc4b552c03a 287 Border router will start dropping packets because of MLE frame counter mismatch. For more information about MLE frame counter feature see the [MLE-05 RFC](https://tools.ietf.org/id/draft-kelsey-intarea-mesh-link-establishment-05.html#rfc.section.7.6).
mbed_official 9:dcc4b552c03a 288 After 240 seconds, the default link timeout triggers the Border router to unregister the lost end device and the BR drops all the counters for that particular device.
mbed_official 9:dcc4b552c03a 289 Now your should should be able to join the network again.