This is a simple mbed client example demonstrating, registration of a device with mbed Device Connector and reading and writing values as well as deregistering on different Network Interfaces including Ethernet, WiFi, 6LoWPAN ND and Thread respectively.

Fork of mbed-os-example-client by mbed-os-examples

Committer:
mbed_official
Date:
Thu Jan 05 12:30:09 2017 +0000
Revision:
53:2e40e7d6aed6
Parent:
52:957eff5f0ee9
Child:
58:e5468bc5bf9a
Editorial changes.
.
Commit copied from https://github.com/ARMmbed/mbed-os-example-client

Who changed what in which revision?

UserRevisionLine numberNew contents of line
Yogesh Pande 0:7d5ec759888b 1 # Getting started with mbed Client on mbed OS
Yogesh Pande 0:7d5ec759888b 2
Yogesh Pande 0:7d5ec759888b 3 This is the mbed Client example for mbed OS (we also have one for [Linux](https://github.com/ARMmbed/mbed-client-linux-example)). It demonstrates how to register a device with mbed Device Connector, how to read and write values, and how to deregister. If you are unfamiliar with mbed Device Connector, we recommend that you read [the introduction to the data model](https://docs.mbed.com/docs/mbed-device-connector-web-interfaces/en/latest/#the-mbed-device-connector-data-model) first.
Yogesh Pande 0:7d5ec759888b 4
Yogesh Pande 0:7d5ec759888b 5 The application:
Yogesh Pande 0:7d5ec759888b 6
Yogesh Pande 0:7d5ec759888b 7 * Connects to network with WiFi, Ethernet, 6LoWPAN ND or Thread connection.
Yogesh Pande 0:7d5ec759888b 8 * Registers with mbed Device Connector.
Yogesh Pande 0:7d5ec759888b 9 * Gives mbed Device Connector access to its resources (read and write).
Yogesh Pande 0:7d5ec759888b 10 * Records the number of clicks on the device’s button and sends the number to mbed Device Connector.
Yogesh Pande 0:7d5ec759888b 11 * Lets you control the blink pattern of the LED on the device (through mbed Device Connector).
Yogesh Pande 0:7d5ec759888b 12
Yogesh Pande 0:7d5ec759888b 13 ## Required hardware
Yogesh Pande 0:7d5ec759888b 14
Yogesh Pande 0:7d5ec759888b 15 * [FRDM-K64F](http://developer.mbed.org/platforms/frdm-k64f/) board.
Yogesh Pande 0:7d5ec759888b 16 * 1-2 micro-USB cables.
Yogesh Pande 0:7d5ec759888b 17 * [mbed 6LoWPAN gateway router](https://firefly-iot.com/product/firefly-6lowpan-gateway-2-4ghz/) for 6LoWPAN ND and Thread.
Yogesh Pande 0:7d5ec759888b 18 * mbed 6LoWPAN shield (AT86RF212B/[AT86RF233](https://firefly-iot.com/product/firefly-arduino-shield-2-4ghz/)) for 6LoWPAN ND and Thread.
Yogesh Pande 0:7d5ec759888b 19 * Ethernet cable and connection to the internet.
Yogesh Pande 0:7d5ec759888b 20
mbed_official 22:e39e09d79a63 21 ## Supported Target hardware configurations
mbed_official 22:e39e09d79a63 22
mbed_official 22:e39e09d79a63 23 This example has been tested in following configuration
mbed_official 22:e39e09d79a63 24 * K64F + NXP MCR20 15.4 shield (mesh `NANOSTACK_FULL` mode)
mbed_official 22:e39e09d79a63 25 * NUCLEO_F429ZI + ATMEL AT233 15.4 shield (mesh `LOWPAN_ROUTER` mode)
mbed_official 22:e39e09d79a63 26 * K64F (Ethernet)
mbed_official 22:e39e09d79a63 27 * NUCLEO_F429ZI (Ethernet)
mbed_official 22:e39e09d79a63 28 * UBLOX_EVK_ODIN_W2 (Ethernet)
mbed_official 22:e39e09d79a63 29 * K64F + GROVE SEEED shield (Wifi)
mbed_official 22:e39e09d79a63 30 * NUCLEO_F429ZI + GROVE SEEED shield (Wifi)
mbed_official 22:e39e09d79a63 31
mbed_official 22:e39e09d79a63 32 Apart from this, this example can work on other mbed OS supported hardware boards which support any of the given network interface including Ethernet, WiFi, Mesh (6LoWPAN) or Thread, provided the configuration fulfills condition that the target hardware has TLS entropy implemented for it and the complete example configuration of mbed Client, selected network interface and mbed OS components fits into hardware's given memory size (Flash size and RAM size).
mbed_official 22:e39e09d79a63 33
mbed_official 21:b88cdeb5b302 34 ## Requirements for non-K64F boards
mbed_official 21:b88cdeb5b302 35
mbed_official 21:b88cdeb5b302 36 * This example requires TLS functionality to be enabled on mbed TLS.
mbed_official 21:b88cdeb5b302 37 On devices where hardware entropy is not present, TLS is disabled by default.
mbed_official 21:b88cdeb5b302 38 This would result in compile time failures or linking failures.
mbed_official 7:9a1ee269650b 39
mbed_official 21:b88cdeb5b302 40 To learn why entropy is required, read the
mbed_official 21:b88cdeb5b302 41 [TLS Porting guide](https://docs.mbed.com/docs/mbed-os-handbook/en/5.2/advanced/tls_porting/).
mbed_official 21:b88cdeb5b302 42
mbed_official 21:b88cdeb5b302 43 * On non-K64F boards, there is no unregistration functionality and
mbed_official 21:b88cdeb5b302 44 button presses are simulated through timer ticks incrementing every 15 seconds.
mbed_official 7:9a1ee269650b 45
Yogesh Pande 0:7d5ec759888b 46 ## Required software
Yogesh Pande 0:7d5ec759888b 47
Yogesh Pande 0:7d5ec759888b 48 * [ARM mbed account](https://developer.mbed.org/account/login/?next=/).
Yogesh Pande 0:7d5ec759888b 49 * [mbed-cli](https://github.com/ARMmbed/mbed-cli) - to build the example programs. To learn how to build mbed OS applications with mbed-cli, see [the user guide](https://github.com/ARMmbed/mbed-cli/blob/master/README.md).
Yogesh Pande 0:7d5ec759888b 50 * [Serial port monitor](https://developer.mbed.org/handbook/SerialPC#host-interface-and-terminal-applications).
Yogesh Pande 0:7d5ec759888b 51
Yogesh Pande 0:7d5ec759888b 52 ## Application setup
Yogesh Pande 0:7d5ec759888b 53
mbed_official 21:b88cdeb5b302 54 To configure the example application:
Yogesh Pande 0:7d5ec759888b 55
Yogesh Pande 0:7d5ec759888b 56 1. [Select the connection type](#connection-type).
Yogesh Pande 0:7d5ec759888b 57 1. [Set the client credentials](#client-credentials).
Yogesh Pande 0:7d5ec759888b 58 1. [Change 6LoWPAN ND & Thread settings](#6lowpan-nd-and-thread-settings).
Yogesh Pande 0:7d5ec759888b 59 1. [Change Ethernet settings](#ethernet-settings).
Yogesh Pande 0:7d5ec759888b 60 1. [Change Wi-Fi settings](#wi-fi-settings).
Yogesh Pande 0:7d5ec759888b 61 1. [Set up an IP address](#ip-address-setup). This step is optional.
Yogesh Pande 0:7d5ec759888b 62 1. [Change the socket type](#changing-socket-type). This step is optional.
Yogesh Pande 0:7d5ec759888b 63
Yogesh Pande 0:7d5ec759888b 64 ### Connection type
Yogesh Pande 0:7d5ec759888b 65
Yogesh Pande 0:7d5ec759888b 66 The application uses Ethernet as the default connection type. To change the connection type, set one of them in `mbed_app.json`. For example, to enable 6LoWPAN ND mode:
Yogesh Pande 0:7d5ec759888b 67
Yogesh Pande 0:7d5ec759888b 68 ```json
Yogesh Pande 0:7d5ec759888b 69 "network-interface": {
Yogesh Pande 0:7d5ec759888b 70 "help": "options are ETHERNET,WIFI,MESH_LOWPAN_ND,MESH_THREAD.",
Yogesh Pande 0:7d5ec759888b 71 "value": "MESH_LOWPAN_ND"
Yogesh Pande 0:7d5ec759888b 72 }
Yogesh Pande 0:7d5ec759888b 73 ```
Yogesh Pande 0:7d5ec759888b 74
Yogesh Pande 0:7d5ec759888b 75 ### Client credentials
Yogesh Pande 0:7d5ec759888b 76
mbed_official 21:b88cdeb5b302 77 To register the application with the Connector service, you need to create and set the client side certificate.
Yogesh Pande 0:7d5ec759888b 78
Yogesh Pande 0:7d5ec759888b 79 1. Go to [mbed Device Connector](https://connector.mbed.com) and log in with your mbed account.
mbed_official 21:b88cdeb5b302 80 1. On mbed Device Connector, go to [My Devices > Security credentials](https://connector.mbed.com/#credentials) and click the **Get my device security credentials** to get new credentials for your device.
mbed_official 21:b88cdeb5b302 81 1. Replace the contents in the `security.h` file of this project's directory with the content copied above.
Yogesh Pande 0:7d5ec759888b 82
Yogesh Pande 0:7d5ec759888b 83 ### 6LoWPAN ND and Thread settings
Yogesh Pande 0:7d5ec759888b 84
mbed_official 21:b88cdeb5b302 85 First, you need to select the RF driver to be used by the 6LoWPAN/Thread stack. This example supports [AT86RF233/212B](https://github.com/ARMmbed/atmel-rf-driver) and [NXP-MCR20a](https://github.com/ARMmbed/mcr20a-rf-driver) radio shields.
Yogesh Pande 1:e06e899acba6 86
mbed_official 21:b88cdeb5b302 87 To add the Atmel driver to you application from command line, call: `mbed add https://github.com/ARMmbed/atmel-rf-driver`.
mbed_official 21:b88cdeb5b302 88 Please make sure that the `mbed_app.json` file points to the correct radio driver type:
Yogesh Pande 1:e06e899acba6 89
mbed_official 21:b88cdeb5b302 90 ```json
mbed_official 21:b88cdeb5b302 91 "mesh_radio_type": {
mbed_official 21:b88cdeb5b302 92 "help": "options are ATMEL, MCR20",
mbed_official 21:b88cdeb5b302 93 "value": "ATMEL"
mbed_official 21:b88cdeb5b302 94 },
mbed_official 21:b88cdeb5b302 95 ```
Yogesh Pande 1:e06e899acba6 96
mbed_official 21:b88cdeb5b302 97 Then you need to enable ARM IPv6/6LoWPAN stack. Edit the `mbed_app.json` file to add `NANOSTACK` feature with the particular configuration of the stack:
Yogesh Pande 1:e06e899acba6 98
Yogesh Pande 1:e06e899acba6 99 ```
mbed_official 21:b88cdeb5b302 100 "target.features_add": ["NANOSTACK", "LOWPAN_ROUTER", "COMMON_PAL"],
mbed_official 21:b88cdeb5b302 101 ```
mbed_official 21:b88cdeb5b302 102
mbed_official 21:b88cdeb5b302 103 If your connection type is `MESH_THREAD` then you may want to use the THREAD_ROUTER configuration:
mbed_official 21:b88cdeb5b302 104
mbed_official 21:b88cdeb5b302 105 ```
mbed_official 21:b88cdeb5b302 106 "target.features_add": ["NANOSTACK", "THREAD_ROUTER", "COMMON_PAL"],
Yogesh Pande 1:e06e899acba6 107 ```
Yogesh Pande 1:e06e899acba6 108
Yogesh Pande 0:7d5ec759888b 109 6LoWPAN ND and Thread use IPv6 for connectivity. Therefore, you need to verify first that you have a working IPv6 connection. To do that, ping the Connector IPv6 address `2607:f0d0:2601:52::20` from your network.
Yogesh Pande 0:7d5ec759888b 110
mbed_official 21:b88cdeb5b302 111 <span class="notes">**Note:** If you are using the [k64f-border-router](https://github.com/ARMmbed/k64f-border-router) (that can be used only as a 6LoWPAN BR and only with FRDM-K64F), you need to enable another security feature. By default, the `k64f-border-router` uses `PSK` as security.</span>
mbed_official 21:b88cdeb5b302 112
mbed_official 21:b88cdeb5b302 113 You can enable the security here on your mbed-os-example-client application, for example:
mbed_official 6:8fff223f3f84 114
mbed_official 6:8fff223f3f84 115 ```json
mbed_official 6:8fff223f3f84 116 "target_overrides": {
mbed_official 6:8fff223f3f84 117 "*": {
mbed_official 6:8fff223f3f84 118 "mbed-mesh-api.6lowpan-nd-security-mode": "PSK",
mbed_official 6:8fff223f3f84 119 }
mbed_official 6:8fff223f3f84 120 }
mbed_official 6:8fff223f3f84 121 ```
mbed_official 21:b88cdeb5b302 122
mbed_official 21:b88cdeb5b302 123 Alternatively, you can remove the link layer security from the `k64f-border-router`. To do that, change the [mbed_app.json](https://github.com/ARMmbed/k64f-border-router/blob/master/mbed_app.json) fetched from the `k64f-border-router` repository, for example:
mbed_official 6:8fff223f3f84 124
mbed_official 6:8fff223f3f84 125 ```json
mbed_official 6:8fff223f3f84 126 "config": {
mbed_official 6:8fff223f3f84 127 "security-mode": "NONE",
mbed_official 6:8fff223f3f84 128 }
mbed_official 6:8fff223f3f84 129 ```
mbed_official 21:b88cdeb5b302 130
Yogesh Pande 0:7d5ec759888b 131 #### mbed gateway
Yogesh Pande 0:7d5ec759888b 132
Yogesh Pande 0:7d5ec759888b 133 To connect the example application in 6LoWPAN ND or Thread mode to Connector, you need to set up an mbed 6LoWPAN gateway router as follows:
Yogesh Pande 0:7d5ec759888b 134
Yogesh Pande 0:7d5ec759888b 135 1. Use an Ethernet cable to connect the mbed 6LoWPAN gateway router to the internet.
Yogesh Pande 0:7d5ec759888b 136 2. Use a micro-USB cable to connect the mbed 6LoWPAN gateway router to your computer. The computer will list the router as removable storage.
Yogesh Pande 0:7d5ec759888b 137 3. The firmware for the gateway is located in the `GW_Binary` folder in the root of this example. Select the binary matching your application bootstrap mode:
Yogesh Pande 0:7d5ec759888b 138
Yogesh Pande 0:7d5ec759888b 139 * For the **6LoWPAN ND** bootstrap, use `gateway6LoWPANDynamic.bin`.
Yogesh Pande 0:7d5ec759888b 140 * For the **Thread** bootstrap, use `gatewayThreadDynamic.bin`.
Yogesh Pande 0:7d5ec759888b 141
Yogesh Pande 0:7d5ec759888b 142 The dynamic binaries use IPv6 autoconfiguration and enable the client to connect to the Connector service. The static binaries create a site-local IPv6 network and packets cannot be routed outside.
Yogesh Pande 0:7d5ec759888b 143
Yogesh Pande 0:7d5ec759888b 144 4. Copy the gateway binary file to the mbed 6LoWPAN gateway router to flash the device. The device reboots automatically after flashing. If that does not happen, press the **Reset** button on the board.
Yogesh Pande 0:7d5ec759888b 145
Yogesh Pande 0:7d5ec759888b 146 You can view debug traces from the gateway with a serial port monitor. The gateway uses baud rate 460800. The gateway IPv6 address is correctly configured when the following trace is visible: `Eth bootstrap ready, IP=XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX`.
Yogesh Pande 0:7d5ec759888b 147
Yogesh Pande 0:7d5ec759888b 148 #### Channel settings
Yogesh Pande 0:7d5ec759888b 149
Yogesh Pande 0:7d5ec759888b 150 The default 2.4GHz channel settings are already defined by the [mbed-mesh-api](https://github.com/ARMmbed/mbed-mesh-api) to match the mbed gateway settings. The application can override these settings by adding them to the `mbed_app.json` file in the main project directory. For example:
Yogesh Pande 0:7d5ec759888b 151
Yogesh Pande 0:7d5ec759888b 152 ```json
Yogesh Pande 0:7d5ec759888b 153 "target_overrides": {
Yogesh Pande 0:7d5ec759888b 154 "*": {
Yogesh Pande 0:7d5ec759888b 155 "mbed-mesh-api.6lowpan-nd-channel-page": 0,
Yogesh Pande 0:7d5ec759888b 156 "mbed-mesh-api.6lowpan-nd-channel": 12,
Yogesh Pande 0:7d5ec759888b 157 "mbed-mesh-api.thread-config-channel-page": 0,
Yogesh Pande 0:7d5ec759888b 158 "mbed-mesh-api.thread-config-channel": 12
Yogesh Pande 0:7d5ec759888b 159 }
Yogesh Pande 0:7d5ec759888b 160 }
Yogesh Pande 0:7d5ec759888b 161 ```
Yogesh Pande 0:7d5ec759888b 162
Yogesh Pande 0:7d5ec759888b 163 For sub-GHz shields (AT86RF212B) use the following overrides, **6LoWPAN ND only**:
Yogesh Pande 0:7d5ec759888b 164
Yogesh Pande 0:7d5ec759888b 165 ```json
Yogesh Pande 0:7d5ec759888b 166 "mbed-mesh-api.6lowpan-nd-channel-page": 2,
Yogesh Pande 0:7d5ec759888b 167 "mbed-mesh-api.6lowpan-nd-channel": 1
Yogesh Pande 0:7d5ec759888b 168 ```
Yogesh Pande 0:7d5ec759888b 169
mbed_official 21:b88cdeb5b302 170 For more information about the radio shields, see [the related documentation](docs/radio_module_identify.md). All configurable settings can be found in the `mbed-os-example-client/mbed-os/features/FEATURE_IPV6/mbed-mesh-api/mbed_lib.json` file.
Yogesh Pande 0:7d5ec759888b 171
Yogesh Pande 0:7d5ec759888b 172 #### Thread-specific settings
Yogesh Pande 0:7d5ec759888b 173
Yogesh Pande 0:7d5ec759888b 174 With Thread, you can change the operating mode of the client from the default router mode to a sleepy end device by adding the following override to the `mbed_app.json` file:
Yogesh Pande 0:7d5ec759888b 175
Yogesh Pande 0:7d5ec759888b 176 ```json
Yogesh Pande 0:7d5ec759888b 177 "mbed-mesh-api.thread-device-type": "MESH_DEVICE_TYPE_THREAD_SLEEPY_END_DEVICE"
Yogesh Pande 0:7d5ec759888b 178 ```
Yogesh Pande 0:7d5ec759888b 179
Yogesh Pande 0:7d5ec759888b 180 ### Ethernet settings
Yogesh Pande 0:7d5ec759888b 181
Yogesh Pande 0:7d5ec759888b 182 For running the example application using Ethernet, you need:
Yogesh Pande 0:7d5ec759888b 183
Yogesh Pande 0:7d5ec759888b 184 - An Ethernet cable.
Yogesh Pande 0:7d5ec759888b 185 - An Ethernet connection to the internet.
Yogesh Pande 0:7d5ec759888b 186
Yogesh Pande 0:7d5ec759888b 187 ### Wi-Fi settings
Yogesh Pande 0:7d5ec759888b 188
Yogesh Pande 0:7d5ec759888b 189 The example application uses ESP8266 WiFi Interface for managing the wireless connectivity. To run this application using WiFi, you need:
Yogesh Pande 0:7d5ec759888b 190
mbed_official 21:b88cdeb5b302 191 1. An [ESP8266](https://en.wikipedia.org/wiki/ESP8266) WiFi module.
mbed_official 21:b88cdeb5b302 192 1. Updated [Espressif Firmware](https://developer.mbed.org/teams/ESP8266/wiki/Firmware-Update).
mbed_official 21:b88cdeb5b302 193 1. Mount the WiFi module onto [K64F Grove Shield v2](https://developer.mbed.org/platforms/FRDM-K64F/#supported-seeed-studio-grove-extension).
Yogesh Pande 0:7d5ec759888b 194 1. Attach the shield on the K64F board.
Yogesh Pande 0:7d5ec759888b 195 1. In the `mbed_app.json` file, change
mbed_official 21:b88cdeb5b302 196
Yogesh Pande 0:7d5ec759888b 197 ```json
Yogesh Pande 0:7d5ec759888b 198 "network-interface": {
Yogesh Pande 0:7d5ec759888b 199 "help": "options are ETHERNET,WIFI,MESH_LOWPAN_ND,MESH_THREAD.",
Yogesh Pande 0:7d5ec759888b 200 "value": "WIFI"
Yogesh Pande 0:7d5ec759888b 201 }
Yogesh Pande 0:7d5ec759888b 202 ```
Yogesh Pande 0:7d5ec759888b 203
Yogesh Pande 0:7d5ec759888b 204 Provide your WiFi SSID and password here and leave `\"` in the beginning and end of your SSID and password (as shown in the example below). Otherwise, the example cannot pick up the SSID and password in correct format.
mbed_official 21:b88cdeb5b302 205
Yogesh Pande 0:7d5ec759888b 206 ```json
Yogesh Pande 0:7d5ec759888b 207 "wifi-ssid": {
Yogesh Pande 0:7d5ec759888b 208 "help": "WiFi SSID",
Yogesh Pande 0:7d5ec759888b 209 "value": "\"SSID\""
Yogesh Pande 0:7d5ec759888b 210 },
Yogesh Pande 0:7d5ec759888b 211 "wifi-password": {
Yogesh Pande 0:7d5ec759888b 212 "help": "WiFi Password",
Yogesh Pande 0:7d5ec759888b 213 "value": "\"Password\""
Yogesh Pande 0:7d5ec759888b 214 }
Yogesh Pande 0:7d5ec759888b 215 ```
Yogesh Pande 0:7d5ec759888b 216
mbed_official 21:b88cdeb5b302 217 <span class="notes">**Note:** Some devices do not support the Grove Shield or use the primary UART for USB communication. On such devices, the `mbed_app.json` should be modified to use the serial pins connected to the ESP8266.</span>
mbed_official 13:c44e318674db 218
mbed_official 21:b88cdeb5b302 219 For example, NUCLEO_F401RE requires a different serial connection:
mbed_official 13:c44e318674db 220
mbed_official 13:c44e318674db 221 ```json
mbed_official 13:c44e318674db 222 "wifi-tx": {
mbed_official 13:c44e318674db 223 "help": "TX pin for serial connection to external device",
mbed_official 13:c44e318674db 224 "value": "PA_11"
mbed_official 13:c44e318674db 225 },
mbed_official 13:c44e318674db 226 "wifi-rx": {
mbed_official 13:c44e318674db 227 "help": "RX pin for serial connection to external device",
mbed_official 13:c44e318674db 228 "value": "PA_12"
mbed_official 13:c44e318674db 229 }
mbed_official 13:c44e318674db 230 ```
mbed_official 13:c44e318674db 231
mbed_official 13:c44e318674db 232
Yogesh Pande 0:7d5ec759888b 233 ### IP address setup
Yogesh Pande 0:7d5ec759888b 234
mbed_official 45:b150e0aa009c 235 This example uses IPv4 to communicate with the [mbed Device Connector Server](https://api.connector.mbed.com) except for 6LoWPAN ND and Thread. However, you can easily change it to IPv6
mbed_official 45:b150e0aa009c 236 by changing the mbed_app.json you make:
mbed_official 45:b150e0aa009c 237 ```
mbed_official 45:b150e0aa009c 238 "target_overrides": {
mbed_official 45:b150e0aa009c 239 "*": {
mbed_official 45:b150e0aa009c 240 "target.features_add": ["LWIP", "NANOSTACK", "COMMON_PAL"],
mbed_official 45:b150e0aa009c 241 "lwip.ipv4-enabled": false,
mbed_official 45:b150e0aa009c 242 "lwip.ipv6-enabled": true,
mbed_official 45:b150e0aa009c 243 "mbed-trace.enable": 0
mbed_official 45:b150e0aa009c 244 }
mbed_official 45:b150e0aa009c 245 ```
mbed_official 45:b150e0aa009c 246 by modifying the ipv4-enable or ipv6-enable to true/false. Only one should be true.
mbed_official 45:b150e0aa009c 247
mbed_official 45:b150e0aa009c 248 The example program should automatically get an IP address from the router when connected over Ethernet or WiFi.
Yogesh Pande 0:7d5ec759888b 249
Yogesh Pande 0:7d5ec759888b 250 If your network does not have DHCP enabled, you have to manually assign a static IP address to the board. We recommend having DHCP enabled to make everything run smoothly.
Yogesh Pande 0:7d5ec759888b 251
Yogesh Pande 0:7d5ec759888b 252 ### Changing socket type
Yogesh Pande 0:7d5ec759888b 253
mbed_official 45:b150e0aa009c 254 Your device can connect to mbed Device Connector via UDP or TCP binding mode. The default and only allowed value is UDP for Thread and 6LowPan. TCP is the default for other connections. The binding mode cannot be changed in 6LoWPAN ND or Thread mode.
Yogesh Pande 0:7d5ec759888b 255
Yogesh Pande 0:7d5ec759888b 256 To change the binding mode:
Yogesh Pande 0:7d5ec759888b 257
mbed_official 45:b150e0aa009c 258 1. In the `simpleclient.h` file, find the parameter `SOCKET_MODE`. The default is `M2MInterface::UDP` for mesh and `M2MInterface::TCP` for others.
mbed_official 37:9a9428fc4b26 259 1. To switch to UDP, change it to `M2MInterface::UDP`.
Yogesh Pande 0:7d5ec759888b 260 1. Rebuild and flash the application.
Yogesh Pande 0:7d5ec759888b 261
Yogesh Pande 0:7d5ec759888b 262 <span class="tips">**Tip:** The instructions in this document remain the same, irrespective of the socket mode you select.</span>
Yogesh Pande 0:7d5ec759888b 263
mbed_official 45:b150e0aa009c 264 Possible socket types per connection:
mbed_official 45:b150e0aa009c 265
mbed_official 45:b150e0aa009c 266 | Network interface | UDP | TCP |
mbed_official 45:b150e0aa009c 267 | ------------------------------|:-----:|:-----:|
mbed_official 45:b150e0aa009c 268 | Ethernet (IPv4) | X | X |
mbed_official 45:b150e0aa009c 269 | Ethernet (IPv6) | X | |
mbed_official 45:b150e0aa009c 270 | Wifi (IPv4) | X | X |
mbed_official 45:b150e0aa009c 271 | Wifi (IPv6) - Not supported | | |
mbed_official 45:b150e0aa009c 272 | 6LoWPAN/Thread (IPv6) | X | |
mbed_official 45:b150e0aa009c 273
Yogesh Pande 0:7d5ec759888b 274 ## Building the example
Yogesh Pande 0:7d5ec759888b 275
mbed_official 21:b88cdeb5b302 276 To build the example using mbed CLI:
Yogesh Pande 0:7d5ec759888b 277
Yogesh Pande 0:7d5ec759888b 278 1. Open a command line tool and navigate to the project’s directory.
mbed_official 21:b88cdeb5b302 279
mbed_official 21:b88cdeb5b302 280 2. Import this example:
mbed_official 21:b88cdeb5b302 281
mbed_official 21:b88cdeb5b302 282 ```
mbed_official 21:b88cdeb5b302 283 mbed import mbed-os-example-client
mbed_official 21:b88cdeb5b302 284 ```
mbed_official 21:b88cdeb5b302 285
mbed_official 45:b150e0aa009c 286 3. Copy the relevant example configuration file from configs/xxx.json to mbed_app.json and
mbed_official 45:b150e0aa009c 287 [Configure](#application-setup) the client application.
mbed_official 21:b88cdeb5b302 288
mbed_official 21:b88cdeb5b302 289 4. To build the application, select the hardware board and build the toolchain using the command:
mbed_official 21:b88cdeb5b302 290
mbed_official 21:b88cdeb5b302 291 ```
mbed_official 21:b88cdeb5b302 292 mbed compile -m K64F -t GCC_ARM -c
mbed_official 21:b88cdeb5b302 293 ```
mbed_official 21:b88cdeb5b302 294
mbed_official 21:b88cdeb5b302 295 mbed CLI builds a binary file under the project’s `BUILD/` directory.
Yogesh Pande 0:7d5ec759888b 296
mbed_official 21:b88cdeb5b302 297 5. Plug the Ethernet cable into the board if you are using Ethernet mode.
mbed_official 21:b88cdeb5b302 298
mbed_official 21:b88cdeb5b302 299 6. If you are using 6LoWPAN ND or Thread mode, connect and power on the gateway first.
mbed_official 21:b88cdeb5b302 300
mbed_official 21:b88cdeb5b302 301 7. Plug the micro-USB cable into the **OpenSDA** port. The board is listed as a mass-storage device.
mbed_official 21:b88cdeb5b302 302
mbed_official 21:b88cdeb5b302 303 8. Drag the binary `BUILD/K64F/GCC_ARM/mbed-os-example-client.bin` to the board to flash the application.
mbed_official 21:b88cdeb5b302 304
mbed_official 21:b88cdeb5b302 305 9. The board is automatically programmed with the new binary. A flashing LED on it indicates that it is still working. When the LED stops blinking, the board is ready to work.
mbed_official 21:b88cdeb5b302 306
mbed_official 21:b88cdeb5b302 307 10. Press the **Reset** button on the board to run the program.
mbed_official 21:b88cdeb5b302 308
mbed_official 21:b88cdeb5b302 309 11. For verification, continue to the [Monitoring the application](#monitoring-the-application) chapter.
mbed_official 21:b88cdeb5b302 310
mbed_official 21:b88cdeb5b302 311 **To build the example using the Online IDE:**
mbed_official 21:b88cdeb5b302 312
mbed_official 21:b88cdeb5b302 313 Import this repository in the Online IDE and continue from step 3 onwards.
Yogesh Pande 0:7d5ec759888b 314
Yogesh Pande 0:7d5ec759888b 315 ## Monitoring the application
Yogesh Pande 0:7d5ec759888b 316
Yogesh Pande 0:7d5ec759888b 317 The application prints debug messages over the serial port, so you can monitor its activity with a serial port monitor. The application uses baud rate 115200.
Yogesh Pande 0:7d5ec759888b 318
Yogesh Pande 0:7d5ec759888b 319 <span class="notes">**Note:** Instructions to set this up are located [here](https://developer.mbed.org/handbook/SerialPC#host-interface-and-terminal-applications).</span>
Yogesh Pande 0:7d5ec759888b 320
Yogesh Pande 0:7d5ec759888b 321 After connecting, you should see messages about connecting to mbed Device Connector:
Yogesh Pande 0:7d5ec759888b 322
Yogesh Pande 0:7d5ec759888b 323 ```
mbed_official 5:b7d7ca715fdb 324 Starting mbed Client example...
mbed_official 5:b7d7ca715fdb 325 Using <Network Interface>
mbed_official 5:b7d7ca715fdb 326
mbed_official 5:b7d7ca715fdb 327 Connected to Network successfully
mbed_official 5:b7d7ca715fdb 328 IP address xxx.xxx.xxx.xxx
mbed_official 5:b7d7ca715fdb 329
mbed_official 5:b7d7ca715fdb 330 SOCKET_MODE : UDP
mbed_official 5:b7d7ca715fdb 331 Connecting to coap://api.connector.mbed.com:5684
mbed_official 5:b7d7ca715fdb 332
Yogesh Pande 0:7d5ec759888b 333 ```
Yogesh Pande 0:7d5ec759888b 334
mbed_official 21:b88cdeb5b302 335 <span class="notes">**Note:** Device name is the endpoint name you will need later on when [testing the application](https://github.com/ARMmbed/mbed-os-example-client#testing-the-application).</span>
Yogesh Pande 0:7d5ec759888b 336
mbed_official 21:b88cdeb5b302 337 When you press the **SW2** button on your board you should see messages about the value changes:
Yogesh Pande 0:7d5ec759888b 338
Yogesh Pande 0:7d5ec759888b 339 ```
Yogesh Pande 0:7d5ec759888b 340 handle_button_click, new value of counter is 1
Yogesh Pande 0:7d5ec759888b 341 ```
Yogesh Pande 0:7d5ec759888b 342
Yogesh Pande 0:7d5ec759888b 343 ## Testing the application
Yogesh Pande 0:7d5ec759888b 344
Yogesh Pande 0:7d5ec759888b 345 1. Flash the application.
mbed_official 21:b88cdeb5b302 346 2. Verify that the registration succeeded. You should see `Registered object successfully!` printed to the serial port.
mbed_official 21:b88cdeb5b302 347 3. On mbed Device Connector, go to [My devices > Connected devices](https://connector.mbed.com/#endpoints). Your device should be listed here.
mbed_official 21:b88cdeb5b302 348 4. Press the **SW2** button on the device a number of times (make a note of how many times you did that).
mbed_official 21:b88cdeb5b302 349 5. Go to [Device Connector > API Console](https://connector.mbed.com/#console).
mbed_official 21:b88cdeb5b302 350 6. Click the **Endpoint directory lookups** drop down menu.
mbed_official 21:b88cdeb5b302 351 ![](/docs/img/ep_lookup.PNG)
mbed_official 21:b88cdeb5b302 352 7. In the menu, click **GET** next to **Endpoint's resource representation**. Select your _endpoint_ and _resource-path_. For example, the _endpoint_ is the identifier of your endpoint that can be found in the `security.h` file as `MBED_ENDPOINT_NAME`. Choose `3200/0/5501`as a resource path and click **TEST API**.
mbed_official 21:b88cdeb5b302 353 8. The number of times you pressed **SW2** is shown.
mbed_official 21:b88cdeb5b302 354 9. Press the **SW3** button to unregister from mbed Device Connector. You should see `Unregistered Object Successfully` printed to the serial port and the LED starts blinking. This will also stop your application. Press the **Reset** button to run the program again.
Yogesh Pande 0:7d5ec759888b 355
mbed_official 21:b88cdeb5b302 356 <span class="notes">**Note:** On non-K64F boards, there is no unregistration functionality and button presses are simulated through timer ticks incrementing every 15 seconds.</span>
Yogesh Pande 0:7d5ec759888b 357
Yogesh Pande 0:7d5ec759888b 358 ![SW2 pressed five times, as shown by the API Console](clicks.png)
Yogesh Pande 0:7d5ec759888b 359
Yogesh Pande 0:7d5ec759888b 360 <span class="tips">**Tip:** If you get an error, for example `Server Response: 410 (Gone)`, clear your browser's cache, log out, and log back in.</span>
Yogesh Pande 0:7d5ec759888b 361
mbed_official 21:b88cdeb5b302 362 <span class="notes">**Note:** Only GET methods can be executed through [Device Connector > API Console](https://connector.mbed.com/#console). For other methods, check the [mbed Device Connector Quick Start](https://github.com/ARMmbed/mbed-connector-api-node-quickstart).
Yogesh Pande 0:7d5ec759888b 363
Yogesh Pande 0:7d5ec759888b 364 ### Application resources
Yogesh Pande 0:7d5ec759888b 365
Yogesh Pande 0:7d5ec759888b 366 The application exposes three [resources](https://docs.mbed.com/docs/mbed-device-connector-web-interfaces/en/latest/#the-mbed-device-connector-data-model):
Yogesh Pande 0:7d5ec759888b 367
mbed_official 21:b88cdeb5b302 368 1. `3200/0/5501`. Number of presses of **SW2** (GET).
mbed_official 21:b88cdeb5b302 369 2. `3201/0/5850`. Blink function, blinks **LED1** when executed (POST).
Yogesh Pande 0:7d5ec759888b 370 3. `3201/0/5853`. Blink pattern, used by the blink function to determine how to blink. In the format of `1000:500:1000:500:1000:500` (PUT).
Yogesh Pande 0:7d5ec759888b 371
mbed_official 21:b88cdeb5b302 372 To learn how to get notifications when resource 1 changes, or how to use resources 2 and 3, read the [mbed Device Connector Quick Start](https://github.com/ARMmbed/mbed-connector-api-node-quickstart).
mbed_official 52:957eff5f0ee9 373
mbed_official 52:957eff5f0ee9 374 #### Compilation problems?
mbed_official 52:957eff5f0ee9 375
mbed_official 53:2e40e7d6aed6 376 If you encounter a problem like this when compiling the application:
mbed_official 52:957eff5f0ee9 377
mbed_official 52:957eff5f0ee9 378 ```
mbed_official 52:957eff5f0ee9 379 Building project mbed-os-example-client (K64F, GCC_ARM)
mbed_official 52:957eff5f0ee9 380 Scan: .
mbed_official 52:957eff5f0ee9 381 Scan: FEATURE_LWIP
mbed_official 52:957eff5f0ee9 382 Scan: FEATURE_UVISOR
mbed_official 52:957eff5f0ee9 383 Scan: FEATURE_COMMON_PAL
mbed_official 52:957eff5f0ee9 384 Scan: FEATURE_BLE
mbed_official 52:957eff5f0ee9 385 Scan: FEATURE_STORAGE
mbed_official 52:957eff5f0ee9 386 Scan: FEATURE_THREAD_BORDER_ROUTER
mbed_official 52:957eff5f0ee9 387 Scan: FEATURE_THREAD_ROUTER
mbed_official 52:957eff5f0ee9 388 Scan: FEATURE_LOWPAN_BORDER_ROUTER
mbed_official 52:957eff5f0ee9 389 Scan: FEATURE_LOWPAN_ROUTER
mbed_official 52:957eff5f0ee9 390 Scan: FEATURE_LOWPAN_HOST
mbed_official 52:957eff5f0ee9 391 Scan: FEATURE_NANOSTACK_FULL
mbed_official 52:957eff5f0ee9 392 Scan: FEATURE_NANOSTACK
mbed_official 52:957eff5f0ee9 393 Scan: FEATURE_THREAD_END_DEVICE
mbed_official 52:957eff5f0ee9 394 Scan: mbed
mbed_official 52:957eff5f0ee9 395 Scan: env
mbed_official 52:957eff5f0ee9 396 Compile [ 0.3%]: NanostackRfPhyAtmel.cpp
mbed_official 52:957eff5f0ee9 397 [ERROR] ./atmel-rf-driver/source/NanostackRfPhyAtmel.cpp:18:44: fatal error: nanostack/platform/arm_hal_phy.h: No such file or directory
mbed_official 52:957eff5f0ee9 398 compilation terminated.
mbed_official 52:957eff5f0ee9 399 ```
mbed_official 53:2e40e7d6aed6 400
mbed_official 53:2e40e7d6aed6 401 You probably have the LWIP stack in use with Ethernet or WiFi and you have the mesh RF stacks in the root of this example. You need to tell mbed NOT to compile the related files. To do that, set up a `.mbedignore` file. An example file is available in the `configs` folder.
mbed_official 53:2e40e7d6aed6 402
mbed_official 53:2e40e7d6aed6 403 This should resolve the issue:
mbed_official 53:2e40e7d6aed6 404
mbed_official 52:957eff5f0ee9 405 ```
mbed_official 52:957eff5f0ee9 406 cp configs/eth-wifi-mbedignore ./.mbedignore
mbed_official 52:957eff5f0ee9 407 ```
mbed_official 52:957eff5f0ee9 408