Avnet_IoT
mbed TCP connectivity program
README.md@0:a254c66d6be2, 2017-11-14 (annotated)
- Committer:
- davyu
- Date:
- Tue Nov 14 05:57:19 2017 +0000
- Revision:
- 0:a254c66d6be2
Initial test program
Who changed what in which revision?
| User | Revision | Line number | New contents of line |
|---|---|---|---|
| davyu | 0:a254c66d6be2 | 1 | # Getting started sample with ethernet TCP on mbed OS |
| davyu | 0:a254c66d6be2 | 2 | |
| davyu | 0:a254c66d6be2 | 3 | |
| davyu | 0:a254c66d6be2 | 4 | ### Import NuMaker-mbed-tcp from on-line IDE |
| davyu | 0:a254c66d6be2 | 5 | 1. Please choose Nuvoton NuMaker-PFM-XXX as your target platform. |
| davyu | 0:a254c66d6be2 | 6 | 2. Please press the left-up icon "New", then choose "NuMaker Ethernet TCP" from the template list. |
| davyu | 0:a254c66d6be2 | 7 | 3. Your NuMaker-mbed-tcp program is existed. |
| davyu | 0:a254c66d6be2 | 8 | |
| davyu | 0:a254c66d6be2 | 9 | #### Now compile |
| davyu | 0:a254c66d6be2 | 10 | Please press compile icon. |
| davyu | 0:a254c66d6be2 | 11 | |
| davyu | 0:a254c66d6be2 | 12 | #### Burn Code & Execute |
| davyu | 0:a254c66d6be2 | 13 | 1. Connect the board NuMaker-PFM-XXX with your PC by USB cable, then there will be one "mbed" disk. |
| davyu | 0:a254c66d6be2 | 14 | 2. Copy the built binary file into "mbed" disk on you PC. |
| davyu | 0:a254c66d6be2 | 15 | 3. Press device's reset button to execute, and you could get the below log by uart console. |
| davyu | 0:a254c66d6be2 | 16 | ------------------------------------------------------------------------------- |
| davyu | 0:a254c66d6be2 | 17 | Start TCP test |
| davyu | 0:a254c66d6be2 | 18 | 100 full |
| davyu | 0:a254c66d6be2 | 19 | Link Up |
| davyu | 0:a254c66d6be2 | 20 | TCP client IP Address is 10.28.10.14 |
| davyu | 0:a254c66d6be2 | 21 | -------------------------------------------------------------------------- |
| davyu | 0:a254c66d6be2 | 22 | User could use tool or "ping" command to test RX/TX of TCP. |
| davyu | 0:a254c66d6be2 | 23 |