easy-connect-wnc

Avnet » Code » Documentation

Avnet / easy-connect-wnc

Added support for the WNC M14A2A Cellular LTE Data Module.

Dependencies: WNC14A2AInterface

Embed: (wiki syntax)

« Back to documentation index

SPIRIT_Calibration.c File Reference

Configuration and management of SPIRIT VCO-RCO calibration. More...

Go to the source code of this file.

Functions
void	SpiritCalibrationRco (SpiritFunctionalState xNewState)
	Enables or Disables the RCO calibration.
void	SpiritCalibrationVco (SpiritFunctionalState xNewState)
	Enables or Disables the VCO calibration.
void	SpiritCalibrationSetRcoCalWords (uint8_t cRwt, uint8_t cRfb)
	Sets the RCO calibration words.
void	SpiritCalibrationGetRcoCalWords (uint8_t pcRwt, uint8_t pcRfb)
	Returns the RCO calibration words.
uint8_t	SpiritCalibrationGetVcoCalData (void)
	Returns the VCO calibration data from internal VCO calibrator.
void	SpiritCalibrationSetVcoCalDataTx (uint8_t cVcoCalData)
	Sets the VCO calibration data to be used in TX mode.
uint8_t	SpiritCalibrationGetVcoCalDataTx (void)
	Returns the actual VCO calibration data used in TX mode.
void	SpiritCalibrationSetVcoCalDataRx (uint8_t cVcoCalData)
	Sets the VCO calibration data to be used in RX mode.
uint8_t	SpiritCalibrationGetVcoCalDataRx (void)
	Returns the actual VCO calibration data used in RX mode.
void	SpiritCalibrationSetVcoWindow (VcoWin xRefWord)
	Sets the VCO calibration window.
VcoWin	SpiritCalibrationGetVcoWindow (void)
	Returns the VCO calibration window.
void	SpiritCalibrationSelectVco (VcoSel xVco)
	Selects a VCO.
VcoSel	SpiritCalibrationGetVcoSelecttion (void)
	Returns the VCO selected.

Detailed Description

Configuration and management of SPIRIT VCO-RCO calibration.

Author:: VMA division - AMS

Version:: 3.2.2

Date:: 08-July-2015

Attention:

© COPYRIGHT(c) 2015 STMicroelectronics

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. 3. Neither the name of STMicroelectronics nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

Definition in file SPIRIT_Calibration.c.