Diff: WncControllerK64F.h

Revision:

3:b7b3d2c554e5

Parent:

2:30d78cda6779

Child:

4:c5720f4d13ff

--- a/WncControllerK64F.h	Thu Sep 01 22:28:10 2016 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,124 +0,0 @@
-/*
-    Copyright (c) 2016 Fred Kellerman
- 
-    Permission is hereby granted, free of charge, to any person obtaining a copy
-    of this software and associated documentation files (the "Software"), to deal
-    in the Software without restriction, including without limitation the rights
-    to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
-    copies of the Software, and to permit persons to whom the Software is
-    furnished to do so, subject to the following conditions:
- 
-    The above copyright notice and this permission notice shall be included in
-    all copies or substantial portions of the Software.
- 
-    THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-    IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-    FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
-    AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
-    LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
-    OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
-    THE SOFTWARE.
-    
-    @file          WncController.h
-    @purpose       Controls WNC Cellular Modem
-    @version       1.0
-    @date          July 2016
-    @author        Fred Kellerman
-*/
-
-#ifndef __WNCCONTROLLERK64F_H_
-#define __WNCCONTROLLERK64F_H_
-
-#include <string>
-#include <stdint.h>
-#include "mbed.h"
-#include "MODSERIAL.h"
-#include "WncController.h"
-
-namespace WncControllerK64F_fk {
-
-using namespace WncController_fk;
-using namespace std;
-
-struct WncGpioPinListK64F {
-    /////////////////////////////////////////////////////
-    // NXP GPIO Pins that are used to initialize the WNC Shield
-    /////////////////////////////////////////////////////
-    DigitalOut * mdm_uart2_rx_boot_mode_sel;   // on powerup, 0 = boot mode, 1 = normal boot
-    DigitalOut * mdm_power_on;                 // 0 = turn modem on, 1 = turn modem off (should be held high for >5 seconds to cycle modem)
-    DigitalOut * mdm_wakeup_in;                // 0 = let modem sleep, 1 = keep modem awake -- Note: pulled high on shield
-    DigitalOut * mdm_reset;                    // active high
-    DigitalOut * shield_3v3_1v8_sig_trans_ena; // 0 = disabled (all signals high impedence, 1 = translation active
-    DigitalOut * mdm_uart1_cts;
-};    
-
-class WncControllerK64F : public WncController
-{
-public:
-    /**
-     *  \brief Constructor for UART controlled WNC
-     *
-     *  \param [in] wnc_uart - Reference to a SerialBuffered object which will
-     *  be used as the bus to control the WNC.  apnStr = a text string for
-     *  the cellular APN name.
-     *
-     *  \return None.
-     *
-     *  \details Adding another way to talk to the WNC, like I2C or USB,
-     *  a constructor should be added for each type just like the SerialBuffered
-     *  constructor below.  Assumes UART is enabled, setup and ready to go. This
-     *  class will read and write to this UART.
-     */
-    WncControllerK64F(struct WncGpioPinListK64F * pPins, MODSERIAL * wnc_uart, MODSERIAL * debug_uart = NULL);
-    
-    /**
-     *  \brief Activates a mode where the user can send text to and from the K64F
-     *  debug Serial port directly to the WNC.
-     *
-     *  \param [in] echoOn - set to true to enable terminal echo
-     *
-     *  \return true - if terminal mode was successfully entered and exited.
-     *
-     *  \details Activates a mode where the user can send text to and from the K64F
-     *  debug Serial port directly to the WNC.  The mode is entered via this
-     *  call.  The mode is exited when the user types CTRL-Q.  While in this
-     *  mode all text to and from the WNC is consumed by the debug Serial port.
-     *  No other methods in the class will receive any of the WNC output.
-     */
-    bool enterWncTerminalMode(bool echoOn);
-    
-private:
-
-    // Disallow copy
-//    WncControllerK64F operator=(WncControllerK64F lhs);
-
-    // Users must define these functionalities:
-    virtual int putc(char c);
-    virtual int puts(const char * s);
-    virtual char getc(void);
-    virtual int charReady(void);
-    virtual int dbgWriteChar(char b);
-    virtual int dbgWriteChars(const char *b);
-    virtual bool initWncModem(uint8_t powerUpTimeoutSecs);
-    virtual void waitMs(int t);
-    virtual void waitUs(int t);
-    
-    virtual int  getLogTimerTicks(void);
-    virtual void startTimerA(void);
-    virtual void stopTimerA(void);
-    virtual int  getTimerTicksA_mS(void);
-    virtual void startTimerB(void);
-    virtual void stopTimerB(void);
-    virtual int  getTimerTicksB_mS(void);
-
-    MODSERIAL * m_pDbgUart;
-    MODSERIAL * m_pWncUart;
-    WncGpioPinListK64F m_gpioPinList;
-    Timer m_logTimer;
-    Timer m_timerA;
-    Timer m_timerB;
-};
-
-};  // End namespace WncController_fk
-
-#endif
\ No newline at end of file