Use this interface to connect to and interact with the WNC M14A2A LTE Cellular Data Module which is provided by Wistron NeWeb Corporation (WNC) when using ARMmbed v5. The interface provides a Networking interface that can be used with the AT&T Cellular IoT Starter Kit that is sold by Avnet (http://cloudconnectkits.org/product/att-cellular-iot-starter-kit).

To demonstrate the use of the Interface, a series of example programs have been provided. Links to these examples are provided below. All examples can be compiled using both the on-line compiler and the ARMmbed CLI (command line interface, see https://github.com/ARMmbed/mbed-cli)

NOTE: This library/class is specific to the AT&T Cellular IoT Starter Kit which uses a FRDM-K64F. The users mbed.org compiler should be configured to use the FRDM-K64F platform.

Example Programs

¶

Import the example programs below and follow the README.md in each to run the example program.

• several examples of the interface using easy_connect.
• SMS demonstration program that demonstrates SMS usage
• Sockets demonstration program demonstrating using TCP sockets to interact with others
• As new example program are developed, this README will be updated

WNC FIRWARE VERSION

¶

The WNCInterface class currently supports the following version(s):

• MPSS: M14A2A_v11.21.162331 APSS: M14A2A_v11.27.162331

License

¶

This library is released under the Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License and may obtain a copy of the License at

http://www.apache.org/licenses/LICENSE-2.0

Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License.