Arrow
Arrow Electronics is a global provider of products, services and solutions to industrial and commercial users of electronic components and enterprise computing solutions.
HANI IOT known issues
The following section describes known issues of the platform.
SYNC_FAILED during Greentea testing¶
Due to fact that there is no physical connection between reset signals in LPC43 and LPC55 on Hani IoT board it is not possible to perform Greentea tests without resetting board manually in between test cases. As a result of that is an error SYNC_FAILED during testing.
To enable easier and automatic Greentea testing easy workaround is provided. Changes made to DAPLink are stored in this repostitory.
Provided bootloader implement a change for a Reset PIN. Reset signal from LPC43 is connected to LINK2_ISP_BOOT (pin 2 on J17). Connect that pin with jumper cable and route it to NRST pin on Arduino Header (pin 3 on J3).
Right know reset signal should be correctly routed to LPC55 and automatic resetting during tests are possible.