Arrow


Arrow Electronics is a global provider of products, services and solutions to industrial and commercial users of electronic components and enterprise computing solutions.

You are viewing an older revision! See the latest version

HANI IOT interface firmware

Table of Contents

  1. Updating HANI IoT firmware
  2. Binary Downloads

HANI IoT firmware can be updated to include mbed USB disk programming capabilities.

Updating HANI IoT firmware

  1. Download and install LPCScrypt
  2. Download bootloader binary for LPC4322 and put inside LPCScrypt installation directory (default C:\NXP\LPCScrypt_2.1.0_842\scripts)
  3. Fit the jumper labelled "J17"
  4. Connect the "link" micro-B connector to the PC

    https://os.mbed.com/media/uploads/130834/mbed-firmware-hani.png

  5. Open a Command Window, navigate to the C:\NXP\LPCScrypt_2.1.0_842\scripts and run the command program_CMSIS.cmd lpc4322_bl_crc.bin. Follow the on-screen instructions.
  6. Remove the jumper "J17" and unplug/plug the board.
  7. You will now see a drive named MAINTENANCE. Drag and drop the binary for HANI IoT onto this drive. The drive will change name to HANI IoT and is ready for drag and drop programming.

Binary Downloads

Bootloader binary for LPC4322
Binary for HANI IoT

All wikipages