Arrow
Repostiory containing DAPLink source code with Reset Pin workaround for HANI_IOT board.
Upstream: https://github.com/ARMmbed/DAPLink
Diff: test/info.py
- Revision:
- 0:01f31e923fe2
diff -r 000000000000 -r 01f31e923fe2 test/info.py
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/test/info.py Tue Apr 07 12:55:42 2020 +0200
@@ -0,0 +1,399 @@
+#
+# DAPLink Interface Firmware
+# Copyright (c) 2009-2019, ARM Limited, All Rights Reserved
+# SPDX-License-Identifier: Apache-2.0
+#
+# Licensed under the Apache License, Version 2.0 (the "License"); you may
+# not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+from __future__ import absolute_import
+
+# Name of all projects ready for public release
+# and info on the file to be distributed
+PROJECT_RELEASE_INFO = {
+ # Project Name Legacy Offset Extension
+ ("k20dx_frdmk22f_if", True, 0x8000, "bin" ),
+ ("k20dx_frdmk64f_if", True, 0x5000, "bin" ),
+ ("k20dx_hexiwear_if", True, 0x8000, "bin" ),
+ ("k20dx_rapid_iot_if", True, 0x8000, "bin" ),
+ ("k20dx_frdmk66f_if", True, 0x8000, "bin" ),
+ ("k20dx_frdmk28f_if", True, 0x8000, "bin" ),
+ ("k20dx_frdmk82f_if", True, 0x8000, "bin" ),
+ ("kl26z_microbit_if", False, 0x8000, "hex" ),
+ ("lpc11u35_lpc812xpresso_if", False, 0x0000, "bin" ),
+ ("lpc11u35_lpc824xpresso_if", False, 0x0000, "bin" ),
+ ("lpc4322_lpc54114xpresso_if", False, 0x10000, "bin" ),
+ ("lpc4322_lpc54608xpresso_if", False, 0x10000, "bin" ),
+ ("lpc4322_lpc55s69xpresso_if", False, 0x10000, "bin" ),
+ ("lpc11u35_ssci1114_if", False, 0x0000, "bin" ),
+ ("sam3u2c_mkit_dk_dongle_nrf5x_if", True, 0x5000, "bin" ),
+ ("k20dx_frdmk20dx_if", True, 0x8000, "bin" ),
+ ("k20dx_frdmkw24d_if", True, 0x8000, "bin" ),
+ ("k20dx_frdmkw41z_if", True, 0x8000, "bin" ),
+ ("k20dx_frdmkl02z_if", True, 0x8000, "bin" ),
+ ("k20dx_frdmkl05z_if", True, 0x8000, "bin" ),
+ ("k20dx_frdmkl25z_if", True, 0x8000, "bin" ),
+ ("k20dx_frdmkl26z_if", True, 0x8000, "bin" ),
+ ("k20dx_frdmkl27z_if", True, 0x8000, "bin" ),
+ ("k20dx_frdmkl28z_if", True, 0x8000, "bin" ),
+ ("k20dx_twrkl28z72m_if", True, 0x8000, "bin" ),
+ ("k20dx_frdmkl43z_if", True, 0x8000, "bin" ),
+ ("k20dx_frdmkl46z_if", True, 0x8000, "bin" ),
+ ("k20dx_frdmkl82z_if", True, 0x5000, "bin" ),
+ ("k20dx_frdmke15z_if", True, 0x8000, "bin" ),
+ ("k20dx_twrke18f_if", True, 0x8000, "bin" ),
+ ("k20dx_hvpke18f_if", True, 0x8000, "bin" ),
+ ("k20dx_mimxrt1020_evk_qspi_if", True, 0x8000, "bin" ),
+ ("k20dx_mimxrt1050_evk_hyper_if", True, 0x8000, "bin" ),
+ ("k20dx_mimxrt1050_evk_qspi_if", True, 0x8000, "bin" ),
+ ('k20dx_ep_agora_if', True, 0x0000, "bin" ),
+ ("k26f_frdmk32w042_if", False, 0x8000, "bin" ),
+ ("lpc11u35_archble_if", False, 0x0000, "bin" ),
+ ("lpc11u35_archpro_if", False, 0x0000, "bin" ),
+ ("lpc11u35_archmax_if", False, 0x0000, "bin" ),
+ ("lpc11u35_wio3g_if", False, 0x0000, "bin" ),
+ ("lpc11u35_wiobg96_if", False, 0x0000, "bin" ),
+ ("lpc11u35_wio_emw3166_if", False, 0x0000, "bin" ),
+ ("lpc11u35_hrm1017_if", False, 0x0000, "bin" ),
+ ("lpc11u35_sscity_if", False, 0x0000, "bin" ),
+ ("lpc11u35_ssci824_if", False, 0x0000, "bin" ),
+ ("lpc11u35_ro359b_if", False, 0x0000, "bin" ),
+ ("k20dx_rbl_if", True, 0x5000, "bin" ),
+ ("k20dx_rblnano_if", True, 0x5000, "bin" ),
+ ("lpc11u35_archlink_if", False, 0x0000, "bin" ),
+ ("lpc11u35_tiny_if", False, 0x0000, "bin" ),
+ ("lpc11u35_c027_if", False, 0x0000, "bin" ),
+ ("sam3u2c_ncs36510rf_if", False, 0x8000, "bin" ),
+ ("kl26z_nina_b1_if", False, 0x8000, "bin" ),
+ ("lpc11u35_lpc4088dm_if", False, 0x0000, "bin" ),
+ ("lpc11u35_lpc4088qsb_if", False, 0x0000, "bin" ),
+ ('lpc11u35_ssci_chibi_if', False, 0x0000, "bin" ),
+ ('lpc11u35_ff1705_l151_if', False, 0x0000, "bin" ),
+ ('lpc11u35_ff_lpc546xx_if', False, 0x0000, "bin" ),
+ ('lpc11u35_mini_iot_lpc54018_if', False, 0x0000, "bin" ),
+ ("k20dx_xdot_l151_if", False, 0x8000, "bin" ),
+ ('lpc11u35_6lowpan_borderrouterhat_if', None, 0x0000, "bin" ),
+ ('lpc11u35_6lowpan_borderrouterusb_if', None, 0x0000, "bin" ),
+ ('lpc11u35_6lowpan_borderrouterethernet_if', None, 0x0000, "bin" ),
+ ('lpc11u35_gr_peach_if', None, 0x0000, "bin" ),
+ ('lpc11u35_gr_lychee_if', None, 0x0000, "bin" ),
+ ('lpc11u35_nz32_sc151_if', False, 0x0000, "bin" ),
+ ('lpc11u35_wizwiki_w7500_if', False, 0x0000, "bin" ),
+ ('lpc11u35_wizwiki_w7500_eco_if', False, 0x0000, "bin" ),
+ ('lpc11u35_wizwiki_w7500p_if', False, 0x0000, "bin" ),
+ ("sam3u2c_ublox_evk_nina_b1_if", True, 0x5000, "bin" ),
+ ("lpc11u35_vbluno51_if", False, 0x0000, "bin" ),
+ ('lpc11u35_mtconnect04s_if', False, 0x0000, "bin" ),
+ ('lpc11u35_mbed_cloud_connect_if', False, 0x0000, "bin" ),
+ ("lpc11u35_rtl8195am_if", False, 0x0000, "bin" ),
+ ("lpc11u35_96b_nitrogen_if", False, 0x0000, "bin" ),
+ ('lpc11u35_mtb_mxchip_emw3166_if', False, 0x0000, "bin" ),
+ ('lpc11u35_mtb_nina_b112_if', False, 0x0000, "bin" ),
+ ('lpc11u35_mtb_murata_abz_078_if', False, 0x0000, "bin" ),
+ ('lpc11u35_mtb_rak811_if', False, 0x0000, "bin" ),
+ ('lpc11u35_mtb_wise1510_if', False, 0x0000, "bin" ),
+ ('lpc11u35_mtb_wise1530_if', False, 0x0000, "bin" ),
+ ('lpc11u35_mtb_wise1570_if', False, 0x0000, "bin" ),
+ ('lpc11u35_mtb_laird_bl652_if', False, 0x0000, "bin" ),
+ ('lpc11u35_mtb_usi_wm_bn_bm_22_if', False, 0x0000, "bin" ),
+ ('lpc11u35_dipdap_sdt52832b_if', False, 0x0000, "bin" ),
+ ('lpc11u35_dipdap_sdt32429b_if', False, 0x0000, "bin" ),
+ ('lpc11u35_dipdap_sdt32439b_if', False, 0x0000, "bin" ),
+ ('lpc11u35_dipdap_sdt64b_if', False, 0x0000, "bin" ),
+ ('lpc11u35_dipdap_sdt51822b_if', False, 0x0000, "bin" ),
+ ('lpc11u35_mtb_ublox_odin_w2_if', False, 0x0000, "bin" ),
+ ('lpc11u35_mtb_mts_dragonfly_if', False, 0x0000, "bin" ),
+ ('lpc11u35_mtb_mts_xdot_if', False, 0x0000, "bin" ),
+ ('lpc11u35_dipdap_cc3220sf_if', False, 0x0000, "bin" ),
+ ('lpc11u35_mtb_laird_bl654_if', False, 0x0000, "bin" ),
+ ('lpc11u35_mtb_murata_bl241_if', False, 0x0000, "bin" ),
+ ('lpc11u35_mtb_stm_s2lp_if', False, 0x0000, "bin" ),
+ ('lpc11u35_mtb_stm32l475_if', False, 0x0000, "bin" ),
+ ('lpc11u35_mtb_aconno_acn52832_if', False, 0x0000, "bin" ),
+ ('lpc11u35_mtb_stm32f439_if', False, 0x0000, "bin" ),
+ ('lpc11u35_musca_a_if', False, 0x0000, "bin" ),
+ ('lpc11u35_musca_b_if', False, 0x0000, "bin" ),
+ ('lpc11u35_musca_b_eflash_if', False, 0x0000, "bin" ),
+ ('max32620_max32625mbed_if', False, 0x0000, "bin" ),
+ ('max32625_max32620fthr_if', False, 0x0000, "bin" ),
+ ('max32625_max32630fthr_if', False, 0x0000, "bin" ),
+ ('kl26z_if', False, 0x0000, "bin" ),
+ ('k20dx_if', False, 0x0000, "bin" ),
+ ('k26f_if', False, 0x0000, "bin" ),
+ ('lpc11u35_if', False, 0x0000, "bin" ),
+ ('lpc4322_if', False, 0x0000, "bin" ),
+ ('max32620_if', False, 0x0000, "bin" ),
+ ('max32625_if', False, 0x0000, "bin" ),
+ ('sam3u2c_if', False, 0x0000, "bin" ),
+ ('stm32f103xb_if', False, 0x0000, "bin" ),
+}
+
+# Add new HICs here
+VENDOR_ID = {
+ 'Stub': 0,
+ 'NXP': 11,
+ 'TI': 16,
+ 'Nordic': 54,
+ 'Toshiba': 92,
+ 'Renesas' : 117,
+ 'Wiznet': 122,
+ 'Realtek': 124,
+}
+
+def VENDOR_TO_FAMILY(x, y) : return (VENDOR_ID[x] <<8) | y
+
+# All supported configurations
+SUPPORTED_CONFIGURATIONS = [
+ # Board ID Family ID Firmware Bootloader Target
+ ( 0x0200, VENDOR_TO_FAMILY('NXP', 2), 'k20dx_frdmkl25z_if', 'k20dx_bl', 'KL25Z' ),
+ ( 0x0201, VENDOR_TO_FAMILY('NXP', 2), 'k20dx_frdmkw41z_if', 'k20dx_bl', 'FRDM-KW41Z' ),
+ ( 0x0203, VENDOR_TO_FAMILY('NXP', 2), 'k20dx_twrkl28z72m_if', 'k20dx_bl', None ),
+ ( 0x0204, VENDOR_TO_FAMILY('NXP', 2), 'k20dx_frdmkl02z_if', 'k20dx_bl', None ),
+ ( 0x0205, VENDOR_TO_FAMILY('NXP', 2), 'k20dx_frdmkl28z_if', 'k20dx_bl', None ),
+ ( 0x0206, VENDOR_TO_FAMILY('NXP', 1), 'k20dx_twrke18f_if', 'k20dx_bl', None ),
+ ( 0x0210, VENDOR_TO_FAMILY('NXP', 2), 'k20dx_frdmkl05z_if', 'k20dx_bl', 'FRDM-KL05Z' ),
+ ( 0x0213, VENDOR_TO_FAMILY('NXP', 2), 'k20dx_frdmke15z_if', 'k20dx_bl', None ),
+ ( 0x0214, VENDOR_TO_FAMILY('NXP', 4), 'k20dx_hexiwear_if', 'k20dx_bl', 'HEXIWEAR' ),
+ ( 0x0216, VENDOR_TO_FAMILY('NXP', 1), 'k20dx_hvpke18f_if', 'k20dx_bl', None ),
+ ( 0x0217, VENDOR_TO_FAMILY('NXP', 1), 'k20dx_frdmk82f_if', 'k20dx_bl', 'FRDM-K82F' ),
+ ( 0x0218, VENDOR_TO_FAMILY('NXP', 2), 'k20dx_frdmkl82z_if', 'k20dx_bl', 'FRDM-KL82Z' ),
+ ( 0x0220, VENDOR_TO_FAMILY('NXP', 2), 'k20dx_frdmkl46z_if', 'k20dx_bl', 'FRDM-KL46Z' ),
+ ( 0x0224, VENDOR_TO_FAMILY('NXP', 1), 'k20dx_frdmk28f_if', 'k20dx_bl', None ), # TODO - set target to 'FRDM-K28F' when mbed-os supports this
+ ( 0x0225, VENDOR_TO_FAMILY('NXP', 1), 'k26f_frdmk32w042_if', 'k26f_bl', None ), # TODO - set target to 'FRDM-K32W042' when mbed-os supports this
+ ( 0x0226, VENDOR_TO_FAMILY('NXP', 3), 'k20dx_mimxrt1020_evk_qspi_if', 'k20dx_bl', None ), # TODO - set target to 'MIMX6RT1050' when mbed-os supports this
+ ( 0x0227, VENDOR_TO_FAMILY('NXP', 3), 'k20dx_mimxrt1050_evk_hyper_if', 'k20dx_bl', None ), # TODO - set target to 'MIMX6RT1050' when mbed-os supports this
+ ( 0x0227, VENDOR_TO_FAMILY('NXP', 3), 'k20dx_mimxrt1050_evk_qspi_if', 'k20dx_bl', None ), # TODO - set target to 'MIMX6RT1050' when mbed-os supports this
+ ( 0x0228, VENDOR_TO_FAMILY('NXP', 4), 'k20dx_rapid_iot_if', 'k20dx_bl', None ), # TODO - set target to 'Rapid-IoT' when mbed-os supports this
+ ( 0x0230, VENDOR_TO_FAMILY('NXP', 1), 'k20dx_frdmk20dx_if', 'k20dx_bl', 'FRDM-K20D50M' ),
+ ( 0x0231, VENDOR_TO_FAMILY('NXP', 1), 'k20dx_frdmk22f_if', 'k20dx_bl', 'FRDM-K22F' ),
+ ( 0x0236, VENDOR_TO_FAMILY('NXP', 0), 'lpc4322_lpc55s69xpresso_if', 'lpc4322_bl', 'LPCXpresso55S69' ),
+ ( 0x0240, VENDOR_TO_FAMILY('NXP', 1), 'k20dx_frdmk64f_if', 'k20dx_bl', 'FRDM-K64F' ),
+ ( 0x0250, VENDOR_TO_FAMILY('NXP', 1), 'k20dx_frdmkw24d_if', 'k20dx_bl', 'FRDM-KW24D512' ),
+ ( 0x0260, VENDOR_TO_FAMILY('NXP', 2), 'k20dx_frdmkl26z_if', 'k20dx_bl', None ),
+ ( 0x0261, VENDOR_TO_FAMILY('NXP', 2), 'k20dx_frdmkl27z_if', 'k20dx_bl', 'FRDM-KL27Z' ),
+ ( 0x0262, VENDOR_TO_FAMILY('NXP', 2), 'k20dx_frdmkl43z_if', 'k20dx_bl', 'FRDM-KL43Z' ),
+ ( 0x0311, VENDOR_TO_FAMILY('NXP', 1), 'k20dx_frdmk66f_if', 'k20dx_bl', 'FRDM-K66F' ),
+ ( 0x0350, VENDOR_TO_FAMILY('Stub', 1), 'k20dx_xdot_l151_if', 'k20dx_bl', None ), # TODO - set target to 'MTS-xDot-L151CC' when mbed-os supports this
+ ( 0x0360, VENDOR_TO_FAMILY('NXP', 1), 'lpc4322_hani_iot_if', 'lpc4322_bl', 'HANI-IOT' ),
+ ( 0x0409, VENDOR_TO_FAMILY('Stub', 1), 'max32625_max32630fthr_if', 'max32625_bl', 'MAX32630' ),
+ ( 0x0415, VENDOR_TO_FAMILY('Stub', 1), 'max32620_max32625mbed_if', 'max32620_bl', 'MAX32625' ),
+ ( 0x0418, VENDOR_TO_FAMILY('Stub', 1), 'max32625_max32620fthr_if', 'max32625_bl', 'MAX32620' ),
+ ( 0x0450, VENDOR_TO_FAMILY('Stub', 1), 'lpc11u35_mtb_ublox_odin_w2_if', None, None ),
+ ( 0x0451, VENDOR_TO_FAMILY('Stub', 1), 'lpc11u35_mtb_mxchip_emw3166_if', None, None ), # TODO - set target when mbed-os supports this
+ ( 0x0453, VENDOR_TO_FAMILY('Stub', 1), 'lpc11u35_mtb_mts_xdot_if', None, None ),
+ ( 0x0454, VENDOR_TO_FAMILY('Stub', 1), 'lpc11u35_mtb_mts_dragonfly_if', None, None ),
+ ( 0x0455, VENDOR_TO_FAMILY('Nordic', 2), 'lpc11u35_mtb_nina_b112_if', None, None ), # TODO - set target when mbed-os supports this
+ ( 0x0456, VENDOR_TO_FAMILY('Stub', 1), 'lpc11u35_mtb_murata_abz_078_if', None, None ), # TODO - set target when mbed-os supports this
+ ( 0x0457, VENDOR_TO_FAMILY('Stub', 1), 'lpc11u35_mtb_rak811_if', None, None ), # TODO - set target when mbed-os supports this
+ ( 0x0458, VENDOR_TO_FAMILY('Stub', 1), 'lpc11u35_mtb_wise1510_if', None, None ), # TODO - set target when mbed-os supports this
+ ( 0x0459, VENDOR_TO_FAMILY('Stub', 1), 'lpc11u35_mtb_wise1530_if', None, None ), # TODO - set target when mbed-os supports this
+ ( 0x0460, VENDOR_TO_FAMILY('Stub', 1), 'lpc11u35_mtb_wise1570_if', None, None ), # TODO - set target when mbed-os supports this
+ ( 0x0461, VENDOR_TO_FAMILY('Nordic', 2), 'lpc11u35_mtb_laird_bl652_if', None, None ), # TODO - set target when mbed-os supports this
+ ( 0x0462, VENDOR_TO_FAMILY('Stub', 1), 'lpc11u35_mtb_usi_wm_bn_bm_22_if', None, None ), # TODO - set target when mbed-os supports this
+ ( 0x0465, VENDOR_TO_FAMILY('Nordic', 2), 'lpc11u35_mtb_laird_bl654_if', None, None ), # TODO - set target when mbed-os supports this
+ ( 0x0466, VENDOR_TO_FAMILY('Nordic', 2), 'lpc11u35_mtb_murata_bl241_if', None, None ), # TODO - set target when mbed-os supports this
+ ( 0x0467, VENDOR_TO_FAMILY('Stub', 1), 'lpc11u35_mtb_stm_s2lp_if', None, None ), # TODO - set target when mbed-os supports this
+ ( 0x0468, VENDOR_TO_FAMILY('Stub', 1), 'lpc11u35_mtb_stm32l475_if', None, None ), # TODO - set target when mbed-os supports this
+ ( 0x0469, VENDOR_TO_FAMILY('Stub', 1), 'lpc11u35_mtb_stm32f439_if', None, None ), # TODO - set target when mbed-os supports this
+ ( 0x0472, VENDOR_TO_FAMILY('Nordic', 2), 'lpc11u35_mtb_aconno_acn52832_if', None, None ), # TODO - set target when mbed-os supports this
+ ( 0x0700, VENDOR_TO_FAMILY('Stub', 1), 'stm32f103xb_stm32f103rb_if', 'stm32f103xb_bl', 'ST-Nucleo-F103RB' ),
+ ( 0x0720, VENDOR_TO_FAMILY('Stub', 1), 'stm32f103xb_stm32f401re_if', 'stm32f103xb_bl', 'ST-Nucleo-F401RE' ),
+ ( 0x0720, VENDOR_TO_FAMILY('Stub', 1), 'stm32f103xb_stm32f072rb_if', 'stm32f103xb_bl', 'ST-Nucleo-F072RB' ),
+ ( 0x0735, VENDOR_TO_FAMILY('Stub', 1), 'stm32f103xb_stm32f334r8_if', 'stm32f103xb_bl', 'ST-Nucleo-F334R8' ),
+ ( 0x0740, VENDOR_TO_FAMILY('Stub', 1), 'stm32f103xb_stm32f411re_if', 'stm32f103xb_bl', 'ST-Nucleo-F411RE' ),
+ ( 0x0765, VENDOR_TO_FAMILY('Stub', 1), 'stm32f103xb_stm32l476rg_if', 'stm32f103xb_bl', 'ST-Nucleo-L476RG' ),
+ ( 0x0796, VENDOR_TO_FAMILY('Stub', 1), 'stm32f103xb_stm32f429zi_if', 'stm32f103xb_bl', 'ST-Nucleo-F429ZI' ),
+ ( 0x0816, VENDOR_TO_FAMILY('Stub', 1), 'stm32f103xb_stm32f746zg_if', 'stm32f103xb_bl', 'ST-Nucleo-F746ZG' ),
+ ( 0x0824, VENDOR_TO_FAMILY('Stub', 1), 'lpc11u35_lpc824xpresso_if', None, 'LPCXpresso824-MAX' ),
+ ( 0x0835, VENDOR_TO_FAMILY('Stub', 1), 'stm32f103xb_stm32f207zg_if', 'stm32f103xb_bl', 'ST-Nucleo-F207ZG' ),
+ ( 0x1017, VENDOR_TO_FAMILY('Nordic', 1), 'lpc11u35_hrm1017_if', None, 'mbed-HRM1017' ),
+ ( 0x1018, VENDOR_TO_FAMILY('Stub', 1), 'lpc11u35_ssci824_if', None, 'Switch-Science-mbed-LPC824' ),
+ ( 0x1019, VENDOR_TO_FAMILY('Nordic', 1), 'lpc11u35_sscity_if', None, 'Switch-Science-mbed-TY51822r3' ),
+ ( 0x1021, VENDOR_TO_FAMILY('Nordic', 1), 'lpc11u35_ssci_chibi_if', None, None ), # TODO - set target to 'SSCI-MBIT' when mbed-os supports this
+ ( 0x1022, VENDOR_TO_FAMILY('Stub', 1), 'lpc11u35_ro359b_if', None, None ),
+ ( 0x1050, VENDOR_TO_FAMILY('Stub', 1), 'lpc11u35_lpc812xpresso_if', None, 'NXP-LPC800-MAX' ),
+ ( 0x1054, VENDOR_TO_FAMILY('Stub', 1), 'lpc4322_lpc54114xpresso_if', 'lpc4322_bl', 'LPCXpresso54114' ),
+ ( 0x1056, VENDOR_TO_FAMILY('Stub', 1), 'lpc4322_lpc54608xpresso_if', 'lpc4322_bl', 'LPCXpresso54608' ),
+ ( 0x1060, VENDOR_TO_FAMILY('NXP', 0), 'lpc11u35_lpc4088qsb_if', None, 'EA-LPC4088' ),
+ ( 0x1062, VENDOR_TO_FAMILY('NXP', 0), 'lpc11u35_lpc4088dm_if', None, 'EA-LPC4088-Display-Module' ),
+ ( 0x1070, VENDOR_TO_FAMILY('Nordic', 1), 'sam3u2c_mkit_dk_dongle_nrf5x_if', 'sam3u2c_bl', 'Nordic-nRF51822' ),
+ ( 0x1090, VENDOR_TO_FAMILY('Nordic', 1), 'k20dx_rbl_if', 'k20dx_bl', 'RedBearLab-nRF51822' ),
+ ( 0x1095, VENDOR_TO_FAMILY('Nordic', 1), 'k20dx_rblnano_if', 'k20dx_bl', 'RedBearLab-BLE-Nano' ),
+ ( 0x1100, VENDOR_TO_FAMILY('Nordic', 1), 'sam3u2c_mkit_dk_dongle_nrf5x_if', 'sam3u2c_bl', 'Nordic-nRF51-DK' ),
+ ( 0x1101, VENDOR_TO_FAMILY('Nordic', 2), 'sam3u2c_mkit_dk_dongle_nrf5x_if', 'sam3u2c_bl', 'Nordic-nRF52-DK' ),
+ ( 0x1102, VENDOR_TO_FAMILY('Nordic', 2), 'sam3u2c_mkit_dk_dongle_nrf5x_if', 'sam3u2c_bl', 'Nordic-nRF52840-DK' ),
+ ( 0x1114, VENDOR_TO_FAMILY('Stub', 1), 'lpc11u35_ssci1114_if', None, 'LPC1114FN28' ),
+ ( 0x1120, VENDOR_TO_FAMILY('Nordic', 1), 'sam3u2c_mkit_dk_dongle_nrf5x_if', 'sam3u2c_bl', 'Nordic-nRF51-Dongle' ),
+ ( 0x1200, VENDOR_TO_FAMILY('Stub', 3), 'sam3u2c_ncs36510rf_if', 'sam3u2c_bl', None ),# TODO - Set to 'ncs36510' when non-zero flash addresses are supported
+ ( 0x1234, VENDOR_TO_FAMILY('Stub', 1), 'lpc11u35_c027_if', None, 'u-blox-C027' ),
+ ( 0x1236, VENDOR_TO_FAMILY('Stub', 1), 'stm32f103xb_ublox_evk_odin_w2_if', 'stm32f103xb_bl', 'ublox-EVK-ODIN-W2' ),
+ ( 0x1237, VENDOR_TO_FAMILY('Nordic', 2), 'sam3u2c_ublox_evk_nina_b1_if', 'sam3u2c_bl', 'U-BLOX-EVK-NINA-B1' ),
+ ( 0x1238, VENDOR_TO_FAMILY('Nordic', 1), 'kl26z_nina_b1_if', 'kl26z_bl', 'u-blox-NINA-B1' ),
+ ( 0x1309, VENDOR_TO_FAMILY('Stub', 3), 'm48ssidae_numaker_m252kg_if', 'm48ssidae_bl', None ),
+ ( 0x1310, VENDOR_TO_FAMILY('Stub', 3), 'm48ssidae_numaker_iot_m263a_if', 'm48ssidae_bl', None ),
+ ( 0x2201, VENDOR_TO_FAMILY('Wiznet', 1), 'lpc11u35_wizwiki_w7500_if', None, 'WIZwiki-W7500' ),
+ ( 0x2202, VENDOR_TO_FAMILY('Wiznet', 1), 'lpc11u35_wizwiki_w7500_eco_if', None, 'WIZwiki-W7500ECO' ),
+ ( 0x2203, VENDOR_TO_FAMILY('Wiznet', 1), 'lpc11u35_wizwiki_w7500p_if', None, 'WIZwiki-W7500P' ),
+ ( 0x2410, VENDOR_TO_FAMILY('Stub', 1), 'lpc11u35_mbed_cloud_connect_if', None, None ),
+ ( 0x2600, VENDOR_TO_FAMILY('Nordic', 2), 'k20dx_ep_agora_if', None, None ),
+ ( 0x3104, VENDOR_TO_FAMILY('Nordic', 2), 'lpc11u35_dipdap_sdt52832b_if', None, None ),
+ ( 0x3108, VENDOR_TO_FAMILY('Stub', 1), 'lpc11u35_dipdap_sdt32429b_if', None, None ),
+ ( 0x3105, VENDOR_TO_FAMILY('NXP', 1), 'lpc11u35_dipdap_sdt64b_if', None, None ),
+ ( 0x3103, VENDOR_TO_FAMILY('Nordic', 1), 'lpc11u35_dipdap_sdt51822b_if', None, None ),
+ ( 0x3110, VENDOR_TO_FAMILY('Stub', 1), 'lpc11u35_dipdap_sdt32439b_if', None, None ),
+ ( 0x3300, VENDOR_TO_FAMILY('TI', 1), 'lpc11u35_dipdap_cc3220sf_if', None, 'CC3220SF' ),
+ ( 0x4600, VENDOR_TO_FAMILY('Realtek', 1), 'lpc11u35_rtl8195am_if', None, 'REALTEK-RTL8195AM' ),
+ ( 0x5006, VENDOR_TO_FAMILY('Stub', 1), 'lpc11u35_musca_a_if', None, 'ARM_MUSCA_A1' ),
+ ( 0x5007, VENDOR_TO_FAMILY('Stub', 1), 'lpc11u35_musca_b_if', None, 'ARM_MUSCA_B1' ),
+ ( 0x5007, VENDOR_TO_FAMILY('Stub', 1), 'lpc11u35_musca_b_eflash_if', None, 'ARM_MUSCA_B1' ),
+ ( 0x5050, VENDOR_TO_FAMILY('Stub', 1), 'lpc11u35_arm_watch_stm32f411_if', None, None ),
+ ( 0x5051, VENDOR_TO_FAMILY('Stub', 3), 'lpc11u35_arm_watch_efm32_if', None, None ),
+ ( 0x5052, VENDOR_TO_FAMILY('Nordic', 1), 'lpc11u35_arm_watch_nrf51_if', None, None ),
+ ( 0x5500, VENDOR_TO_FAMILY('Renesas', 1), 'lpc11u35_gr_peach_if', None, None ), # TODO - Set to 'Renesas-GR-PEACH' once this target builds
+ ( 0x5501, VENDOR_TO_FAMILY('Renesas', 1), 'lpc11u35_gr_lychee_if', None, None ), # TODO - Set to 'Renesas-GR-LYCHEE' once this target builds
+ ( 0x6660, VENDOR_TO_FAMILY('Stub', 1), 'lpc11u35_nz32_sc151_if', None, None ), # TODO - set target to 'NZ32-SC151' when mbed-os supports this
+ ( 0x7010, VENDOR_TO_FAMILY('Toshiba', 1), 'lpc11u35_blueninja_if', None, None ), # TODO - set target to 'BlueNinja-CDP-TZ01B' when mbed-os supports this
+ ( 0x7402, VENDOR_TO_FAMILY('NXP', 1), 'lpc11u35_6lowpan_borderrouterhat_if', None, 'mbed-6LoWPAN-Border-Router-HAT' ),
+ ( 0x7403, VENDOR_TO_FAMILY('NXP', 1), 'lpc11u35_6lowpan_borderrouterusb_if', None, 'mbed-6LoWPAN-Border-Router-USB' ),
+ ( 0x7404, VENDOR_TO_FAMILY('NXP', 1), 'lpc11u35_6lowpan_borderrouterethernet_if', None, 'mbed-6LoWPAN-Border-Router-ETHERNET' ),
+ ( 0x8080, VENDOR_TO_FAMILY('Stub', 1), 'lpc11u35_ff1705_l151_if', None, None ), # TODO - set target to 'L-TEK-FF1705' when mbed-os supports this
+ ( 0x8081, VENDOR_TO_FAMILY('Stub', 1), 'lpc11u35_ff_lpc546xx_if', None, None ), # TODO - set target to 'L-TEK-FF-LPC546XX' when mbed-os supports this
+ ( 0x9004, VENDOR_TO_FAMILY('Stub', 1), 'lpc11u35_archpro_if', None, 'Seeeduino-Arch-Pro' ),
+ ( 0x9009, VENDOR_TO_FAMILY('Nordic', 1), 'lpc11u35_archble_if', None, 'Seeed-Arch-BLE' ),
+ ( 0x9011, VENDOR_TO_FAMILY('Stub', 1), 'lpc11u35_archmax_if', None, 'Seeed-Arch-Max' ),
+ ( 0x9012, VENDOR_TO_FAMILY('Nordic', 1), 'lpc11u35_tiny_if', None, 'Seeed-Tiny-BLE' ),
+ ( 0x9013, VENDOR_TO_FAMILY('Nordic', 1), 'lpc11u35_archlink_if', None, 'Seeed-Arch-Link' ),
+ ( 0x9014, VENDOR_TO_FAMILY('Stub', 1), 'lpc11u35_wio3g_if', None, None ),
+ ( 0x9015, VENDOR_TO_FAMILY('Stub', 1), 'lpc11u35_wiobg96_if', None, None ),
+ ( 0x9016, VENDOR_TO_FAMILY('Nordic', 2), 'lpc11u35_96b_nitrogen_if', None, None ), # TODO - set target to 'Seeed-96Boards-Nitrogen' when mbed-os supports this
+ ( 0x9017, VENDOR_TO_FAMILY('Stub', 1), 'lpc11u35_wio_emw3166_if', None, 'WIO_EMW3166' ), # TODO - set target to 'Seeed-96Boards-Nitrogen' when mbed-os supports this
+ ( 0x9900, VENDOR_TO_FAMILY('Nordic', 1), 'kl26z_microbit_if', 'kl26z_bl', 'Microbit' ),
+ ( 0x9901, VENDOR_TO_FAMILY('Nordic', 1), 'kl26z_microbit_if', 'kl26z_bl', 'Microbit' ),
+ ( 0xC000, VENDOR_TO_FAMILY('Stub', 1), 'lpc11u35_cocorico_if', None, 'CoCo-ri-Co' ),
+ ( 0xC006, VENDOR_TO_FAMILY('Nordic', 1), 'lpc11u35_vbluno51_if', None, 'VBLUNO51' ),
+ ( 0xC005, VENDOR_TO_FAMILY('Nordic', 1), 'lpc11u35_mtconnect04s_if', None, 'MtConnect04S' ),
+ ( 0x0000, VENDOR_TO_FAMILY('Stub', 1), 'kl26z_if', None, None ),
+ ( 0x0000, VENDOR_TO_FAMILY('Stub', 1), 'k20dx_if', None, None ),
+ ( 0x0000, VENDOR_TO_FAMILY('Stub', 1), 'k26f_if', None, None ),
+ ( 0x0000, VENDOR_TO_FAMILY('Stub', 1), 'lpc11u35_if', None, None ),
+ ( 0x0000, VENDOR_TO_FAMILY('Stub', 1), 'lpc4322_if', None, None ),
+ ( 0x0000, VENDOR_TO_FAMILY('Stub', 1), 'max32620_if', None, None ),
+ ( 0x0000, VENDOR_TO_FAMILY('Stub', 1), 'max32625_if', None, None ),
+ ( 0x0000, VENDOR_TO_FAMILY('Stub', 1), 'sam3u2c_if', None, None ),
+ ( 0x0000, VENDOR_TO_FAMILY('Stub', 1), 'stm32f103xb_if', None, None ),
+]
+
+# Add new HICs here
+HIC_STRING_TO_ID = {
+ 'k20dx': 0x97969900,
+ 'kl26z': 0x97969901,
+ 'lpc11u35': 0x97969902,
+ 'sam3u2c': 0x97969903,
+ 'max32620': 0x97969904,
+ 'lpc4322': 0x97969905,
+ 'max32625': 0x97969906,
+ 'stm32f103xb': 0x97969908,
+ 'k26f': 0x97969909,
+ 'm48ssidae': 0x97969921,
+}
+
+BOARD_ID_LOCKED_WHEN_ERASED = set([
+ 0x0231, # K22F
+ 0x0224, # K28F
+ 0x0240, # K64F
+ 0x0214, # HEXIWEAR
+ 0x0228, # RAPID-IOT
+ 0x0311, # K66F
+ 0x0230, # K20DX
+ 0x0200, # KL25Z
+ 0x0205, # FRDM-KL28Z
+ 0x0203, # TWR-KL28Z72M
+ 0x0206, # TWR-KE18F
+ 0x0220, # KL46Z
+ 0x0210, # KL05Z
+ 0x0213, # FRDM-KE15Z
+ 0x0216, # HVP-KE18F
+ 0x0217, # FRDM-K82F
+ 0x0225, # FRDM-K32W042
+ 0x0261, # FRDM-KL27Z
+ 0x0262, # FRDM-KL43Z
+ 0x0218, # FRDM-KL82Z
+ 0x1022, # RO359B (K24F)
+ 0x0201, # KW41Z
+])
+
+BOARD_ID_SUPPORTING_PAGE_ERASE = set([
+ 0x0214, # HEXIWEAR
+ 0x0225, # FRDM-K32W042
+ 0x0226, # MIMXRT1020 EVK
+ 0x0227, # MIMXRT1050 EVK
+ 0x0228, # k20dx_rapid_iot_if
+ 0x0235, # lpc11u35_mini_iot_lpc54018_if
+ 0x0236, # LPCXpresso55S69
+ 0x0240, # K64F
+ 0x0311, # K66F
+ 0x0409, # MAX32630FTHR
+ 0x0415, # MAX32625MBED
+ 0x0418, # MAX32620FTHR
+ 0x0450, # mtb_ublox_odin_w2
+ 0x0456, # lpc11u35_mtb_murata_abz_078_if
+ 0x0457, # lpc11u35_mtb_rak811_if
+ 0x0460, # WISE-1570
+ 0x0468, # lpc11u35_mtb_stm32l475_if
+ 0x0469, # lpc11u35_mtb_stm32f439_if
+ 0x1101, # Nordic-nRF52-DK
+ 0x1102, # Nordic-nRF52840-DK
+ 0x1309, # NuMaker-M252KG
+ 0x1310, # NuMaker-IoT-M263A
+ 0x2410, # lpc11u35_mbed_cloud_connect_if
+ 0x3103, # dipdap_sdt51822b
+ 0x3104, # dipdap_sdt52832b
+ 0x3105, # dipdap_sdt64b
+ 0x3108, # dipdap_sdt32429b
+ 0x3110, # dipdap_sdt32439b
+ 0x3300, # dipdap_cc3220sf
+ 0x4600, # REALTEK-RTL8195AM
+ 0x5500, # GR-PEACH
+ 0x5501, # GR-LYCHEE
+])
+
+#Hack until these targets have an image with a valid vector table
+TARGET_WITH_BAD_VECTOR_TABLE_LIST = [
+ 'Microbit',
+ 'Nordic-nRF51-DK',
+ 'Nordic-nRF52-DK',
+ 'Nordic-nRF52840-DK',
+ 'Nordic-nRF51822',
+ 'Nordic-nRF51-Dongle',
+ 'Seeed-Arch-BLE',
+ 'mbed-HRM1017',
+ 'Switch-Science-mbed-TY51822r3',
+ 'RedBearLab-nRF51822',
+ 'RedBearLab-BLE-Nano',
+ 'Seeed-Tiny-BLE',
+ 'Seeed-Arch-Link',
+ 'SSCI-MBIT',
+ 'BlueNinja',
+ 'U-BLOX-EVK-NINA-B1',
+ 'VNG-VBLUno51',
+ 'REALTEK-RTL8195AM']
+
+BOARD_ID_TO_BUILD_TARGET = {config[0]: config[4] for config in
+ SUPPORTED_CONFIGURATIONS}
+FIRMWARE_SET = set((config[2] for config in SUPPORTED_CONFIGURATIONS))
+TARGET_SET = set((target[4] for target in SUPPORTED_CONFIGURATIONS if
+ target[4] is not None))
+
+TARGET_WITH_COMPILE_API_LIST = [config[4] for config in
+ SUPPORTED_CONFIGURATIONS if
+ config[4] is not None]