Diff: source/hic_hal/freescale/iap/fsl_common.h

Revision:

0:01f31e923fe2

diff -r 000000000000 -r 01f31e923fe2 source/hic_hal/freescale/iap/fsl_common.h
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/source/hic_hal/freescale/iap/fsl_common.h	Tue Apr 07 12:55:42 2020 +0200
@@ -0,0 +1,253 @@
+/*
+ * Copyright (c) 2015, Freescale Semiconductor, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ *
+ * o Redistributions of source code must retain the above copyright notice, this list
+ *   of conditions and the following disclaimer.
+ *
+ * o Redistributions in binary form must reproduce the above copyright notice, this
+ *   list of conditions and the following disclaimer in the documentation and/or
+ *   other materials provided with the distribution.
+ *
+ * o Neither the name of Freescale Semiconductor, Inc. nor the names of its
+ *   contributors may be used to endorse or promote products derived from this
+ *   software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _FSL_COMMON_H_
+#define _FSL_COMMON_H_
+
+// #include <assert.h>
+#include <stdbool.h>
+#include <stdint.h>
+#include <string.h>
+#include "fsl_device_registers.h"
+#include "util.h"
+
+/*!
+ * @addtogroup ksdk_common
+ * @{
+ */
+
+/*******************************************************************************
+ * Definitions
+ ******************************************************************************/
+
+// Redefine assert to DAPLink's assert utility for code size savings.
+#define assert(x) util_assert((x));
+
+/*! @brief Construct a status code value from a group and code number. */
+#define MAKE_STATUS(group, code) ((((group)*100) + (code)))
+
+/*! @brief Construct the version number for drivers. */
+#define MAKE_VERSION(major, minor, bugfix) (((major) << 16) | ((minor) << 8) | (bugfix))
+
+/* Debug console type definition. */
+#define DEBUG_CONSOLE_DEVICE_TYPE_NONE 0U   /*!< No debug console.             */
+#define DEBUG_CONSOLE_DEVICE_TYPE_UART 1U   /*!< Debug console base on UART.   */
+#define DEBUG_CONSOLE_DEVICE_TYPE_LPUART 2U /*!< Debug console base on LPUART. */
+#define DEBUG_CONSOLE_DEVICE_TYPE_LPSCI 3U  /*!< Debug console base on LPSCI.  */
+#define DEBUG_CONSOLE_DEVICE_TYPE_USBCDC 4U /*!< Debug console base on USBCDC. */
+
+/*! @brief Status group numbers. */
+enum _status_groups
+{
+    kStatusGroup_Generic = 0,                 /*!< Group number for generic status codes. */
+    kStatusGroup_FLASH = 1,                   /*!< Group number for FLASH status codes. */
+    kStatusGroup_LPSPI = 4,                   /*!< Group number for LPSPI status codes. */
+    kStatusGroup_FLEXIO_SPI = 5,              /*!< Group number for FLEXIO SPI status codes. */
+    kStatusGroup_DSPI = 6,                    /*!< Group number for DSPI status codes. */
+    kStatusGroup_FLEXIO_UART = 7,             /*!< Group number for FLEXIO UART status codes. */
+    kStatusGroup_FLEXIO_I2C = 8,              /*!< Group number for FLEXIO I2C status codes. */
+    kStatusGroup_LPI2C = 9,                   /*!< Group number for LPI2C status codes. */
+    kStatusGroup_UART = 10,                   /*!< Group number for UART status codes. */
+    kStatusGroup_I2C = 11,                    /*!< Group number for UART status codes. */
+    kStatusGroup_LPSCI = 12,                  /*!< Group number for LPSCI status codes. */
+    kStatusGroup_LPUART = 13,                 /*!< Group number for LPUART status codes. */
+    kStatusGroup_SPI = 14,                    /*!< Group number for SPI status code.*/
+    kStatusGroup_XRDC = 15,                   /*!< Group number for XRDC status code.*/
+    kStatusGroup_SEMA42 = 16,                 /*!< Group number for SEMA42 status code.*/
+    kStatusGroup_SDHC = 17,                   /*!< Group number for SDHC status code */
+    kStatusGroup_SDMMC = 18,                  /*!< Group number for SDMMC status code */
+    kStatusGroup_SAI = 19,                    /*!< Group number for SAI status code */
+    kStatusGroup_MCG = 20,                    /*!< Group number for MCG status codes. */
+    kStatusGroup_SCG = 21,                    /*!< Group number for SCG status codes. */
+    kStatusGroup_SDSPI = 22,                  /*!< Group number for SDSPI status codes. */
+    kStatusGroup_FLEXIO_I2S = 23,             /*!< Group number for FLEXIO I2S status codes */
+    kStatusGroup_SDRAMC = 35,                 /*!< Group number for SDRAMC status codes. */
+    kStatusGroup_POWER = 39,                  /*!< Group number for POWER status codes. */
+    kStatusGroup_ENET = 40,                   /*!< Group number for ENET status codes. */
+    kStatusGroup_PHY = 41,                    /*!< Group number for PHY status codes. */
+    kStatusGroup_TRGMUX = 42,                 /*!< Group number for TRGMUX status codes. */
+    kStatusGroup_SMARTCARD = 43,              /*!< Group number for SMARTCARD status codes. */
+    kStatusGroup_LMEM = 44,                   /*!< Group number for LMEM status codes. */
+    kStatusGroup_QSPI = 45,                   /*!< Group number for QSPI status codes. */
+    kStatusGroup_DMA = 50,                    /*!< Group number for DMA status codes. */
+    kStatusGroup_EDMA = 51,                   /*!< Group number for EDMA status codes. */
+    kStatusGroup_DMAMGR = 52,                 /*!< Group number for DMAMGR status codes. */
+    kStatusGroup_FLEXCAN = 53,                /*!< Group number for FlexCAN status codes. */
+    kStatusGroup_LTC = 54,                    /*!< Group number for LTC status codes. */
+    kStatusGroup_FLEXIO_CAMERA = 55,          /*!< Group number for FLEXIO CAMERA status codes. */
+    kStatusGroup_NOTIFIER = 98,               /*!< Group number for NOTIFIER status codes. */
+    kStatusGroup_DebugConsole = 99,           /*!< Group number for debug console status codes. */
+    kStatusGroup_ApplicationRangeStart = 100, /*!< Starting number for application groups. */
+};
+
+/*! @brief Generic status return codes. */
+enum _generic_status
+{
+    kStatus_Success = MAKE_STATUS(kStatusGroup_Generic, 0),
+    kStatus_Fail = MAKE_STATUS(kStatusGroup_Generic, 1),
+    kStatus_ReadOnly = MAKE_STATUS(kStatusGroup_Generic, 2),
+    kStatus_OutOfRange = MAKE_STATUS(kStatusGroup_Generic, 3),
+    kStatus_InvalidArgument = MAKE_STATUS(kStatusGroup_Generic, 4),
+    kStatus_Timeout = MAKE_STATUS(kStatusGroup_Generic, 5),
+    kStatus_NoTransferInProgress = MAKE_STATUS(kStatusGroup_Generic, 6),
+};
+
+/*! @brief Type used for all status and error return values. */
+typedef int32_t status_t;
+
+// #include "fsl_clock.h"
+
+/*! @name Min/max macros */
+/* @{ */
+// #if !defined(MIN)
+// #define MIN(a, b) ((a) < (b) ? (a) : (b))
+// #endif
+//
+// #if !defined(MAX)
+// #define MAX(a, b) ((a) > (b) ? (a) : (b))
+// #endif
+// /* @} */
+//
+// /*! @brief Computes the number of elements in an array. */
+// #define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0]))
+
+/*! @name UINT16_MAX/UINT32_MAX value */
+/* @{ */
+#if !defined(UINT16_MAX)
+#define UINT16_MAX ((uint16_t)-1)
+#endif
+
+#if !defined(UINT32_MAX)
+#define UINT32_MAX ((uint32_t)-1)
+#endif
+/* @} */
+
+/*! @name Timer utilities */
+/* @{ */
+/*! Macro to convert a microsecond period to raw count value */
+#define USEC_TO_COUNT(us, clockFreqInHz) (uint64_t)((uint64_t)us * clockFreqInHz / 1000000U)
+/*! Macro to convert a raw count value to microsecond */
+#define COUNT_TO_USEC(count, clockFreqInHz) (uint64_t)((uint64_t)count * 1000000U / clockFreqInHz)
+
+/*! Macro to convert a millisecond period to raw count value */
+#define MSEC_TO_COUNT(ms, clockFreqInHz) (uint64_t)((uint64_t)ms * clockFreqInHz / 1000U)
+/*! Macro to convert a raw count value to millisecond */
+#define COUNT_TO_MSEC(count, clockFreqInHz) (uint64_t)((uint64_t)count * 1000U / clockFreqInHz)
+/* @} */
+
+/*******************************************************************************
+ * API
+ ******************************************************************************/
+
+#if defined(__cplusplus)
+extern "C" {
+#endif
+
+/*!
+ * @brief Enable specific interrupt.
+ *
+ * Enable the interrupt not routed from intmux.
+ *
+ * @param interrupt The IRQ number.
+ */
+static inline void EnableIRQ(IRQn_Type interrupt)
+{
+#if defined(FSL_FEATURE_SOC_INTMUX_COUNT) && (FSL_FEATURE_SOC_INTMUX_COUNT > 0)
+    if (interrupt < FSL_FEATURE_INTMUX_IRQ_START_INDEX)
+#endif
+    {
+        NVIC_EnableIRQ(interrupt);
+    }
+}
+
+/*!
+ * @brief Disable specific interrupt.
+ *
+ * Disable the interrupt not routed from intmux.
+ *
+ * @param interrupt The IRQ number.
+ */
+static inline void DisableIRQ(IRQn_Type interrupt)
+{
+#if defined(FSL_FEATURE_SOC_INTMUX_COUNT) && (FSL_FEATURE_SOC_INTMUX_COUNT > 0)
+    if (interrupt < FSL_FEATURE_INTMUX_IRQ_START_INDEX)
+#endif
+    {
+        NVIC_DisableIRQ(interrupt);
+    }
+}
+
+/*!
+ * @brief Disable the global IRQ
+ *
+ * Disable the global interrupt and return the current primask register. User is required to provided the primask
+ * register for the EnableGlobalIRQ().
+ *
+ * @return Current primask value.
+ */
+static inline uint32_t DisableGlobalIRQ(void)
+{
+    uint32_t regPrimask = __get_PRIMASK();
+
+    __disable_irq();
+
+    return regPrimask;
+}
+
+/*!
+ * @brief Enaable the global IRQ
+ *
+ * Set the primask register with the provided primask value but not just enable the primask. The idea is for the
+ * convinience of integration of RTOS. some RTOS get its own management mechanism of primask. User is required to
+ * use the EnableGlobalIRQ() and DisableGlobalIRQ() in pair.
+ *
+ * @param primask value of primask register to be restored. The primask value is supposed to be provided by the
+ * DisableGlobalIRQ().
+ */
+static inline void EnableGlobalIRQ(uint32_t primask)
+{
+    __set_PRIMASK(primask);
+}
+
+/*!
+ * @brief install IRQ handler
+ *
+ * @param irq IRQ number
+ * @param irqHandler IRQ handler address
+ */
+void InstallIRQHandler(IRQn_Type irq, uint32_t irqHandler);
+
+#if defined(__cplusplus)
+}
+#endif
+
+/*! @} */
+
+#endif /* _FSL_COMMON_H_ */