Diff: source/hic_hal/atmel/sam3u2c/instance/pioa.h

Revision:

0:01f31e923fe2

diff -r 000000000000 -r 01f31e923fe2 source/hic_hal/atmel/sam3u2c/instance/pioa.h
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/source/hic_hal/atmel/sam3u2c/instance/pioa.h	Tue Apr 07 12:55:42 2020 +0200
@@ -0,0 +1,124 @@
+/* ---------------------------------------------------------------------------- */
+/*                  Atmel Microcontroller Software Support                      */
+/*                       SAM Software Package License                           */
+/* ---------------------------------------------------------------------------- */
+/* Copyright (c) %copyright_year%, Atmel Corporation                                        */
+/*                                                                              */
+/* All rights reserved.                                                         */
+/*                                                                              */
+/* Redistribution and use in source and binary forms, with or without           */
+/* modification, are permitted provided that the following condition is met:    */
+/*                                                                              */
+/* - Redistributions of source code must retain the above copyright notice,     */
+/* this list of conditions and the disclaimer below.                            */
+/*                                                                              */
+/* Atmel's name may not be used to endorse or promote products derived from     */
+/* this software without specific prior written permission.                     */
+/*                                                                              */
+/* DISCLAIMER:  THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR   */
+/* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF */
+/* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE   */
+/* DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,      */
+/* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT */
+/* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,  */
+/* OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF    */
+/* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING         */
+/* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, */
+/* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.                           */
+/* ---------------------------------------------------------------------------- */
+
+#ifndef _SAM3U_PIOA_INSTANCE_
+#define _SAM3U_PIOA_INSTANCE_
+
+/* ========== Register definition for PIOA peripheral ========== */
+#if (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
+#define REG_PIOA_PER             (0x400E0C00U) /**< \brief (PIOA) PIO Enable Register */
+#define REG_PIOA_PDR             (0x400E0C04U) /**< \brief (PIOA) PIO Disable Register */
+#define REG_PIOA_PSR             (0x400E0C08U) /**< \brief (PIOA) PIO Status Register */
+#define REG_PIOA_OER             (0x400E0C10U) /**< \brief (PIOA) Output Enable Register */
+#define REG_PIOA_ODR             (0x400E0C14U) /**< \brief (PIOA) Output Disable Register */
+#define REG_PIOA_OSR             (0x400E0C18U) /**< \brief (PIOA) Output Status Register */
+#define REG_PIOA_IFER            (0x400E0C20U) /**< \brief (PIOA) Glitch Input Filter Enable Register */
+#define REG_PIOA_IFDR            (0x400E0C24U) /**< \brief (PIOA) Glitch Input Filter Disable Register */
+#define REG_PIOA_IFSR            (0x400E0C28U) /**< \brief (PIOA) Glitch Input Filter Status Register */
+#define REG_PIOA_SODR            (0x400E0C30U) /**< \brief (PIOA) Set Output Data Register */
+#define REG_PIOA_CODR            (0x400E0C34U) /**< \brief (PIOA) Clear Output Data Register */
+#define REG_PIOA_ODSR            (0x400E0C38U) /**< \brief (PIOA) Output Data Status Register */
+#define REG_PIOA_PDSR            (0x400E0C3CU) /**< \brief (PIOA) Pin Data Status Register */
+#define REG_PIOA_IER             (0x400E0C40U) /**< \brief (PIOA) Interrupt Enable Register */
+#define REG_PIOA_IDR             (0x400E0C44U) /**< \brief (PIOA) Interrupt Disable Register */
+#define REG_PIOA_IMR             (0x400E0C48U) /**< \brief (PIOA) Interrupt Mask Register */
+#define REG_PIOA_ISR             (0x400E0C4CU) /**< \brief (PIOA) Interrupt Status Register */
+#define REG_PIOA_MDER            (0x400E0C50U) /**< \brief (PIOA) Multi-driver Enable Register */
+#define REG_PIOA_MDDR            (0x400E0C54U) /**< \brief (PIOA) Multi-driver Disable Register */
+#define REG_PIOA_MDSR            (0x400E0C58U) /**< \brief (PIOA) Multi-driver Status Register */
+#define REG_PIOA_PUDR            (0x400E0C60U) /**< \brief (PIOA) Pull-up Disable Register */
+#define REG_PIOA_PUER            (0x400E0C64U) /**< \brief (PIOA) Pull-up Enable Register */
+#define REG_PIOA_PUSR            (0x400E0C68U) /**< \brief (PIOA) Pad Pull-up Status Register */
+#define REG_PIOA_ABSR            (0x400E0C70U) /**< \brief (PIOA) Peripheral AB Select Register */
+#define REG_PIOA_SCIFSR          (0x400E0C80U) /**< \brief (PIOA) System Clock Glitch Input Filter Select Register */
+#define REG_PIOA_DIFSR           (0x400E0C84U) /**< \brief (PIOA) Debouncing Input Filter Select Register */
+#define REG_PIOA_IFDGSR          (0x400E0C88U) /**< \brief (PIOA) Glitch or Debouncing Input Filter Clock Selection Status Register */
+#define REG_PIOA_SCDR            (0x400E0C8CU) /**< \brief (PIOA) Slow Clock Divider Debouncing Register */
+#define REG_PIOA_OWER            (0x400E0CA0U) /**< \brief (PIOA) Output Write Enable */
+#define REG_PIOA_OWDR            (0x400E0CA4U) /**< \brief (PIOA) Output Write Disable */
+#define REG_PIOA_OWSR            (0x400E0CA8U) /**< \brief (PIOA) Output Write Status Register */
+#define REG_PIOA_AIMER           (0x400E0CB0U) /**< \brief (PIOA) Additional Interrupt Modes Enable Register */
+#define REG_PIOA_AIMDR           (0x400E0CB4U) /**< \brief (PIOA) Additional Interrupt Modes Disables Register */
+#define REG_PIOA_AIMMR           (0x400E0CB8U) /**< \brief (PIOA) Additional Interrupt Modes Mask Register */
+#define REG_PIOA_ESR             (0x400E0CC0U) /**< \brief (PIOA) Edge Select Register */
+#define REG_PIOA_LSR             (0x400E0CC4U) /**< \brief (PIOA) Level Select Register */
+#define REG_PIOA_ELSR            (0x400E0CC8U) /**< \brief (PIOA) Edge/Level Status Register */
+#define REG_PIOA_FELLSR          (0x400E0CD0U) /**< \brief (PIOA) Falling Edge/Low Level Select Register */
+#define REG_PIOA_REHLSR          (0x400E0CD4U) /**< \brief (PIOA) Rising Edge/ High Level Select Register */
+#define REG_PIOA_FRLHSR          (0x400E0CD8U) /**< \brief (PIOA) Fall/Rise - Low/High Status Register */
+#define REG_PIOA_LOCKSR          (0x400E0CE0U) /**< \brief (PIOA) Lock Status */
+#define REG_PIOA_WPMR            (0x400E0CE4U) /**< \brief (PIOA) Write Protect Mode Register */
+#define REG_PIOA_WPSR            (0x400E0CE8U) /**< \brief (PIOA) Write Protect Status Register */
+#else
+#define REG_PIOA_PER    (*(WoReg*)0x400E0C00U) /**< \brief (PIOA) PIO Enable Register */
+#define REG_PIOA_PDR    (*(WoReg*)0x400E0C04U) /**< \brief (PIOA) PIO Disable Register */
+#define REG_PIOA_PSR    (*(RoReg*)0x400E0C08U) /**< \brief (PIOA) PIO Status Register */
+#define REG_PIOA_OER    (*(WoReg*)0x400E0C10U) /**< \brief (PIOA) Output Enable Register */
+#define REG_PIOA_ODR    (*(WoReg*)0x400E0C14U) /**< \brief (PIOA) Output Disable Register */
+#define REG_PIOA_OSR    (*(RoReg*)0x400E0C18U) /**< \brief (PIOA) Output Status Register */
+#define REG_PIOA_IFER   (*(WoReg*)0x400E0C20U) /**< \brief (PIOA) Glitch Input Filter Enable Register */
+#define REG_PIOA_IFDR   (*(WoReg*)0x400E0C24U) /**< \brief (PIOA) Glitch Input Filter Disable Register */
+#define REG_PIOA_IFSR   (*(RoReg*)0x400E0C28U) /**< \brief (PIOA) Glitch Input Filter Status Register */
+#define REG_PIOA_SODR   (*(WoReg*)0x400E0C30U) /**< \brief (PIOA) Set Output Data Register */
+#define REG_PIOA_CODR   (*(WoReg*)0x400E0C34U) /**< \brief (PIOA) Clear Output Data Register */
+#define REG_PIOA_ODSR   (*(RwReg*)0x400E0C38U) /**< \brief (PIOA) Output Data Status Register */
+#define REG_PIOA_PDSR   (*(RoReg*)0x400E0C3CU) /**< \brief (PIOA) Pin Data Status Register */
+#define REG_PIOA_IER    (*(WoReg*)0x400E0C40U) /**< \brief (PIOA) Interrupt Enable Register */
+#define REG_PIOA_IDR    (*(WoReg*)0x400E0C44U) /**< \brief (PIOA) Interrupt Disable Register */
+#define REG_PIOA_IMR    (*(RoReg*)0x400E0C48U) /**< \brief (PIOA) Interrupt Mask Register */
+#define REG_PIOA_ISR    (*(RoReg*)0x400E0C4CU) /**< \brief (PIOA) Interrupt Status Register */
+#define REG_PIOA_MDER   (*(WoReg*)0x400E0C50U) /**< \brief (PIOA) Multi-driver Enable Register */
+#define REG_PIOA_MDDR   (*(WoReg*)0x400E0C54U) /**< \brief (PIOA) Multi-driver Disable Register */
+#define REG_PIOA_MDSR   (*(RoReg*)0x400E0C58U) /**< \brief (PIOA) Multi-driver Status Register */
+#define REG_PIOA_PUDR   (*(WoReg*)0x400E0C60U) /**< \brief (PIOA) Pull-up Disable Register */
+#define REG_PIOA_PUER   (*(WoReg*)0x400E0C64U) /**< \brief (PIOA) Pull-up Enable Register */
+#define REG_PIOA_PUSR   (*(RoReg*)0x400E0C68U) /**< \brief (PIOA) Pad Pull-up Status Register */
+#define REG_PIOA_ABSR   (*(RwReg*)0x400E0C70U) /**< \brief (PIOA) Peripheral AB Select Register */
+#define REG_PIOA_SCIFSR (*(WoReg*)0x400E0C80U) /**< \brief (PIOA) System Clock Glitch Input Filter Select Register */
+#define REG_PIOA_DIFSR  (*(WoReg*)0x400E0C84U) /**< \brief (PIOA) Debouncing Input Filter Select Register */
+#define REG_PIOA_IFDGSR (*(RoReg*)0x400E0C88U) /**< \brief (PIOA) Glitch or Debouncing Input Filter Clock Selection Status Register */
+#define REG_PIOA_SCDR   (*(RwReg*)0x400E0C8CU) /**< \brief (PIOA) Slow Clock Divider Debouncing Register */
+#define REG_PIOA_OWER   (*(WoReg*)0x400E0CA0U) /**< \brief (PIOA) Output Write Enable */
+#define REG_PIOA_OWDR   (*(WoReg*)0x400E0CA4U) /**< \brief (PIOA) Output Write Disable */
+#define REG_PIOA_OWSR   (*(RoReg*)0x400E0CA8U) /**< \brief (PIOA) Output Write Status Register */
+#define REG_PIOA_AIMER  (*(WoReg*)0x400E0CB0U) /**< \brief (PIOA) Additional Interrupt Modes Enable Register */
+#define REG_PIOA_AIMDR  (*(WoReg*)0x400E0CB4U) /**< \brief (PIOA) Additional Interrupt Modes Disables Register */
+#define REG_PIOA_AIMMR  (*(RoReg*)0x400E0CB8U) /**< \brief (PIOA) Additional Interrupt Modes Mask Register */
+#define REG_PIOA_ESR    (*(WoReg*)0x400E0CC0U) /**< \brief (PIOA) Edge Select Register */
+#define REG_PIOA_LSR    (*(WoReg*)0x400E0CC4U) /**< \brief (PIOA) Level Select Register */
+#define REG_PIOA_ELSR   (*(RoReg*)0x400E0CC8U) /**< \brief (PIOA) Edge/Level Status Register */
+#define REG_PIOA_FELLSR (*(WoReg*)0x400E0CD0U) /**< \brief (PIOA) Falling Edge/Low Level Select Register */
+#define REG_PIOA_REHLSR (*(WoReg*)0x400E0CD4U) /**< \brief (PIOA) Rising Edge/ High Level Select Register */
+#define REG_PIOA_FRLHSR (*(RoReg*)0x400E0CD8U) /**< \brief (PIOA) Fall/Rise - Low/High Status Register */
+#define REG_PIOA_LOCKSR (*(RoReg*)0x400E0CE0U) /**< \brief (PIOA) Lock Status */
+#define REG_PIOA_WPMR   (*(RwReg*)0x400E0CE4U) /**< \brief (PIOA) Write Protect Mode Register */
+#define REG_PIOA_WPSR   (*(RoReg*)0x400E0CE8U) /**< \brief (PIOA) Write Protect Status Register */
+#endif /* (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
+
+#endif /* _SAM3U_PIOA_INSTANCE_ */