Repostiory containing DAPLink source code with Reset Pin workaround for HANI_IOT board.
Upstream: https://github.com/ARMmbed/DAPLink
Diff: source/family/st/stm32l486jg/flash_blob.c
- Revision:
- 0:01f31e923fe2
diff -r 000000000000 -r 01f31e923fe2 source/family/st/stm32l486jg/flash_blob.c --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/source/family/st/stm32l486jg/flash_blob.c Tue Apr 07 12:55:42 2020 +0200 @@ -0,0 +1,73 @@ +/* Flash OS Routines (Automagically Generated) + * Copyright (c) 2009-2019 ARM Limited + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + #include "flash_blob.h" + +static const uint32_t _flash_prog_blob[] = { + 0xE00ABE00, 0x062D780D, 0x24084068, 0xD3000040, 0x1E644058, 0x1C49D1FA, 0x2A001E52, 0x4770D1F2, + 0x8f4ff3bf, 0x48584770, 0x49586800, 0x0d000500, 0xd0001840, 0x47702001, 0x6a004855, 0x0fc00280, + 0xb5004770, 0xf7ff4602, 0x2801ffee, 0xf7ffd108, 0x2801fff3, 0x484fd104, 0xd3014282, 0xbd002001, + 0xbd002000, 0x4602b500, 0xffddf7ff, 0xd0022801, 0x0d8002d0, 0x4948bd00, 0x40080ad0, 0xd5f90311, + 0x300130ff, 0x4842bd00, 0x60814944, 0x60814944, 0x60012100, 0x61014943, 0x03c06a00, 0x4843d406, + 0x60014941, 0x60412106, 0x60814941, 0x47702000, 0x49372001, 0x614807c0, 0x47702000, 0x47702001, + 0x49384833, 0x13c16101, 0x69416141, 0x04122201, 0x61414311, 0x4a354937, 0x6011e000, 0x03db6903, + 0x2100d4fb, 0x46086141, 0xb5104770, 0xf7ff4604, 0x4603ffa8, 0xf7ff4620, 0x4925ffb5, 0x610c4c29, + 0x02d800c2, 0x43021c92, 0x6948614a, 0x04122201, 0x61484310, 0x8f4ff3bf, 0x4a244826, 0x6010e000, + 0x03db690b, 0x2000d4fb, 0x69086148, 0xd0014020, 0x2001610c, 0xb5f0bd10, 0x4d151dc9, 0x4f1908c9, + 0x612f00c9, 0x616b2300, 0xe0184c1a, 0x616b2301, 0x60036813, 0x60436853, 0x8f4ff3bf, 0xe0004b13, + 0x692e601c, 0xd4fb03f6, 0x616b2300, 0x423b692b, 0x612fd002, 0xbdf02001, 0x39083008, 0x29003208, + 0x2000d1e4, 0x0000bdf0, 0xe0042000, 0xfffffbcb, 0x40022000, 0x08080000, 0x000002ff, 0x45670123, + 0xcdef89ab, 0x0000c3fa, 0x00005555, 0x40003000, 0x00000fff, 0x0000aaaa, 0x00000000 +}; + +// Start address of flash +static const uint32_t flash_start = 0x08000000; +// Size of flash +static const uint32_t flash_size = 0x00100000; + +/** +* List of start and size for each size of flash sector +* The size will apply to all sectors between the listed address and the next address +* in the list. +* The last pair in the list will have sectors starting at that address and ending +* at address start + size. +*/ +static const sector_info_t sectors_info[] = { + {0x08000000, 0x00000800}, +}; + +static const program_target_t flash = { + 0x20000087, // Init + 0x200000b1, // UnInit + 0x200000c1, // EraseChip + 0x200000eb, // EraseSector + 0x20000137, // ProgramPage + 0x0, // Verify + + // BKPT : start of blob + 1 + // RSB : blob start + header + rw data offset + // RSP : stack pointer + { + 0x20000001, + 0x200001b8, + 0x20000800 + }, + + 0x20000000 + 0x00000A00, // mem buffer location + 0x20000000, // location to write prog_blob in target RAM + sizeof(_flash_prog_blob), // prog_blob size + _flash_prog_blob, // address of prog_blob + 0x00000400 // ram_to_flash_bytes_to_be_written +};