Repostiory containing DAPLink source code with Reset Pin workaround for HANI_IOT board.

Upstream: https://github.com/ARMmbed/DAPLink

Revision:
0:01f31e923fe2
diff -r 000000000000 -r 01f31e923fe2 source/family/st/stm32f429zi/flash_blob.c
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/source/family/st/stm32f429zi/flash_blob.c	Tue Apr 07 12:55:42 2020 +0200
@@ -0,0 +1,67 @@
+/* Flash OS Routines (Automagically Generated)
+ * Copyright (c) 2009-2019 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+static const uint32_t STM32F429ZI_flash_prog_blob[] = {
+    0xE00ABE00, 0x062D780D, 0x24084068, 0xD3000040, 0x1E644058, 0x1C49D1FA, 0x2A001E52, 0x4770D1F2,
+    0x03004601, 0x28200e00, 0x0940d302, 0xe0051d00, 0xd3022810, 0x1cc00900, 0x0880e000, 0xd50102c9,
+    0x43082110, 0x48464770, 0x60414944, 0x60414945, 0x60012100, 0x22f068c1, 0x60c14311, 0x06806940,
+    0x4842d406, 0x60014940, 0x60412106, 0x60814940, 0x47702000, 0x6901483a, 0x43110542, 0x20006101,
+    0xb5304770, 0x69014836, 0x43212404, 0x69016101, 0x43290365, 0x69016101, 0x431103a2, 0x49356101,
+    0xe0004a32, 0x68c36011, 0xd4fb03db, 0x43a16901, 0x69016101, 0x610143a9, 0xbd302000, 0xf7ffb530,
+    0x4927ffaf, 0x23f068ca, 0x60ca431a, 0x610c2402, 0x06c0690a, 0x43020e00, 0x6908610a, 0x431003e2,
+    0x48246108, 0xe0004a21, 0x68cd6010, 0xd4fb03ed, 0x43a06908, 0x68c86108, 0x0f000600, 0x68c8d003,
+    0x60c84318, 0xbd302001, 0x4d15b570, 0x08891cc9, 0x008968eb, 0x433326f0, 0x230060eb, 0x4b16612b,
+    0x692ce017, 0x612c431c, 0x60046814, 0x03e468ec, 0x692cd4fc, 0x00640864, 0x68ec612c, 0x0f240624,
+    0x68e8d004, 0x60e84330, 0xbd702001, 0x1d121d00, 0x29001f09, 0x2000d1e5, 0x0000bd70, 0x45670123,
+    0x40023c00, 0xcdef89ab, 0x00005555, 0x40003000, 0x00000fff, 0x0000aaaa, 0x00000201, 0x00000000
+};
+
+/**
+ * @brief List of start and size for each size of flash sector.
+ *
+ * Even indexes are start, odd are size. The size will apply to all sectors between the listed
+ * address and the next address in the list. The last pair in the list will have sectors starting
+ * at that address and ending at address flash_start + flash_size.
+*/
+static const sector_info_t sectors_info[] = {
+    { 0x08000000, 0x00004000 }, // 4 x 16KB
+    { 0x08010000, 0x00010000 }, // 1 x 64KB
+    { 0x08020000, 0x00020000 }, // 7 x 128KB
+};
+
+static const program_target_t flash = {
+    0x20000047, // Init
+    0x20000075, // UnInit
+    0x20000083, // EraseChip
+    0x200000bd, // EraseSector
+    0x20000109, // ProgramPage
+    0x0,        // Verify
+    
+    // BKPT : start of blob + 1
+    // RSB  : blob start + header + rw data offset
+    // RSP  : stack pointer
+    {
+        0x20000001,
+        0x2000017c,
+        0x20000800
+    },
+
+    0x20000000 + 0x00000A00,  // mem buffer location
+    0x20000000,               // location to write prog_blob in target RAM
+    sizeof(STM32F429ZI_flash_prog_blob),   // prog_blob size
+    STM32F429ZI_flash_prog_blob,           // address of prog_blob
+    0x00000400       // ram_to_flash_bytes_to_be_written
+};