Repostiory containing DAPLink source code with Reset Pin workaround for HANI_IOT board.

Upstream: https://github.com/ARMmbed/DAPLink

Revision:
0:01f31e923fe2
diff -r 000000000000 -r 01f31e923fe2 source/family/nordic/nrf51822/flash_blob.c
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/source/family/nordic/nrf51822/flash_blob.c	Tue Apr 07 12:55:42 2020 +0200
@@ -0,0 +1,64 @@
+/**
+ * @file    flash_blob.c
+ * @brief   Flash algorithm for the nrf51
+ *
+ * DAPLink Interface Firmware
+ * Copyright (c) 2009-2019, ARM Limited, All Rights Reserved
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License"); you may
+ * not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include "flash_blob.h"
+
+static const uint32_t nRF51822AA_FLM[] = {
+    0xE00ABE00, 0x062D780D, 0x24084068, 0xD3000040, 0x1E644058, 0x1C49D1FA, 0x2A001E52, 0x4770D1F2,
+
+    /*0x020*/ 0x47702000, 0x47702000, 0x4c26b570, 0x60602002, 0x60e02001, 0x68284d24, 0xd00207c0L, 0x60602000,
+    /*0x040*/ 0xf000bd70L, 0xe7f6f82cL, 0x4c1eb570, 0x60612102, 0x4288491e, 0x2001d302, 0xe0006160L, 0x4d1a60a0,
+    /*0x060*/ 0xf81df000L, 0x7c06828, 0x2000d0fa, 0xbd706060L, 0x4605b5f8, 0x4813088e, 0x46142101, 0x4f126041,
+    /*0x080*/ 0xc501cc01L, 0x7c06838, 0x1e76d006, 0x480dd1f8, 0x60412100, 0xbdf84608L, 0xf801f000L, 0x480ce7f2,
+    /*0x0A0*/ 0x6006840, 0xd00b0e00L, 0x6849490a, 0xd0072900L, 0x4a0a4909, 0xd00007c3L, 0x1d09600a, 0xd1f90840L,
+    /*0x0C0*/ 0x4770, 0x4001e500, 0x4001e400, 0x10001000, 0x40010400, 0x40010500, 0x40010600, 0x6e524635,
+    /*0x0E0*/ 0x0,
+};
+
+/**
+* List of start and size for each size of flash sector
+* The size will apply to all sectors between the listed address and the next address
+* in the list.
+* The last pair in the list will have sectors starting at that address and ending
+* at address start + size.
+*/
+static const sector_info_t sectors_info[] = {
+    {0, 1024},
+ };
+
+static const program_target_t flash = {
+    .init = 0x20000021,
+    .uninit = 0x20000025,
+    .erase_chip = 0x20000029,
+    .erase_sector = 0x20000049,
+    .program_page = 0x20000071,
+    .verify = 0x0,
+    {
+        .breakpoint = 0x20000001,
+        .static_base = 0x20000020 + 0x00000150,
+        .stack_pointer = 0x20001000
+    },
+    .program_buffer = 0x20000200,
+    .algo_start = 0x20000000,
+    .algo_size = 0x00000150,
+    .algo_blob = nRF51822AA_FLM,
+    .program_buffer_size = 512 // should be USBD_MSC_BlockSize
+};