Repostiory containing DAPLink source code with Reset Pin workaround for HANI_IOT board.
Upstream: https://github.com/ARMmbed/DAPLink
Diff: source/board/max32620_bl.c
- Revision:
- 0:01f31e923fe2
diff -r 000000000000 -r 01f31e923fe2 source/board/max32620_bl.c --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/source/board/max32620_bl.c Tue Apr 07 12:55:42 2020 +0200 @@ -0,0 +1,59 @@ +/** + * @file max32620_bl.c + * @brief board ID and meta-data for the hardware interface circuit (HIC) based on MAX32620 + * + * DAPLink Interface Firmware + * Copyright (c) 2009-2019, ARM Limited, All Rights Reserved + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the "License"); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#include "target_config.h" +#include "target_board.h" +#include "target_family.h" + +/** +* List of start and size for each size of flash sector +* The size will apply to all sectors between the listed address and the next address +* in the list. +* The last pair in the list will have sectors starting at that address and ending +* at address start + size. +*/ +static const sector_info_t sectors_info[] = { + {0x00000000 + 0x10000, 0x2000}, + }; + +/* ME02 -- MAX32620 2MiB Flash, 256KiB RAM */ +target_cfg_t target_device = { + .sectors_info = sectors_info, + .sector_info_length = (sizeof(sectors_info))/(sizeof(sector_info_t)), + .flash_regions[0].start = 0x00000000 + 0x10000, + .flash_regions[0].end = 0x00000000 + MB(2), + .flash_regions[0].flags = kRegionIsDefault, + .ram_regions[0].start = 0x20000000, + .ram_regions[0].end = 0x20040000, + /* .flash_algo not needed for bootloader */ +}; + +//bootloader has no family +const target_family_descriptor_t *g_target_family = NULL; + +const board_info_t g_board_info = { + .info_version = kBoardInfoVersion, + .board_id = "0000", + .daplink_url_name = "HELP_FAQHTM", + .daplink_drive_name = "MAINTENANCE", + .daplink_target_url = "https://mbed.com/daplink", + .target_cfg = &target_device, +};