Diff: source/board/k26f_bl.c

Revision:

0:01f31e923fe2

diff -r 000000000000 -r 01f31e923fe2 source/board/k26f_bl.c
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/source/board/k26f_bl.c	Tue Apr 07 12:55:42 2020 +0200
@@ -0,0 +1,64 @@
+/**
+ * @file    k26f_bl.c
+ * @brief   board ID and meta-data for the hardware interface circuit (HIC) based on the NXP K26F
+ *
+ * DAPLink Interface Firmware
+ * Copyright (c) 2009-2019, ARM Limited, All Rights Reserved
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License"); you may
+ * not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include "target_config.h"
+#include "daplink_addr.h"
+#include "compiler.h"
+#include "target_board.h"
+#include "target_family.h"
+
+// Warning - changing the interface start will break backwards compatibility
+COMPILER_ASSERT(DAPLINK_ROM_IF_START == KB(64));
+
+/**
+* List of start and size for each size of flash sector
+* The size will apply to all sectors between the listed address and the next address
+* in the list.
+* The last pair in the list will have sectors starting at that address and ending
+* at address start + size.
+*/
+static const sector_info_t sectors_info[] = {
+    {DAPLINK_ROM_IF_START, DAPLINK_SECTOR_SIZE},
+ };
+
+// k26f target information
+target_cfg_t target_device = {
+    .sectors_info               = sectors_info,
+    .sector_info_length         = (sizeof(sectors_info))/(sizeof(sector_info_t)),
+    .flash_regions[0].start     = DAPLINK_ROM_IF_START,
+    .flash_regions[0].end       = DAPLINK_ROM_IF_START + DAPLINK_ROM_IF_SIZE,
+    .flash_regions[0].flags     = kRegionIsDefault,  
+    .ram_regions[0].start       = 0x1fff0000,
+    .ram_regions[0].end         = 0x20030000,
+    /* .flash_algo not needed for bootloader */
+};
+
+//bootloader has no family
+const target_family_descriptor_t *g_target_family = NULL;
+
+const board_info_t g_board_info = {
+    .info_version = kBoardInfoVersion,
+    .board_id = "0000",
+    .daplink_url_name =   "HELP_FAQHTM",
+    .daplink_drive_name = "BOOTLOADER",
+    .daplink_target_url = "https://mbed.com/daplink",
+    .target_cfg = &target_device,
+};