Repostiory containing DAPLink source code with Reset Pin workaround for HANI_IOT board.
Upstream: https://github.com/ARMmbed/DAPLink
source/rtos/rt_HAL_CM.h
- Committer:
- Pawel Zarembski
- Date:
- 2020-04-07
- Revision:
- 0:01f31e923fe2
File content as of revision 0:01f31e923fe2:
/** * @file rt_HAL_CM.h * @brief * * DAPLink Interface Firmware * Copyright (c) 2009-2016, ARM Limited, All Rights Reserved * SPDX-License-Identifier: Apache-2.0 * * Licensed under the Apache License, Version 2.0 (the "License"); you may * not use this file except in compliance with the License. * You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. */ /* Definitions */ #define INITIAL_xPSR 0x01000000 #define DEMCR_TRCENA 0x01000000 #define ITM_ITMENA 0x00000001 #define MAGIC_WORD 0xE25A2EA5 // ARMCC has deprecated use for ldrex and strex functions // from C so do not used them on any devices. #if (0) #define __USE_EXCLUSIVE_ACCESS #else #undef __USE_EXCLUSIVE_ACCESS #endif /* NVIC registers */ #define NVIC_ST_CTRL (*((volatile U32 *)0xE000E010)) #define NVIC_ST_RELOAD (*((volatile U32 *)0xE000E014)) #define NVIC_ST_CURRENT (*((volatile U32 *)0xE000E018)) #define NVIC_ISER ((volatile U32 *)0xE000E100) #define NVIC_ICER ((volatile U32 *)0xE000E180) #if (__TARGET_ARCH_6S_M) #define NVIC_IP ((volatile U32 *)0xE000E400) #else #define NVIC_IP ((volatile U8 *)0xE000E400) #endif #define NVIC_INT_CTRL (*((volatile U32 *)0xE000ED04)) #define NVIC_AIR_CTRL (*((volatile U32 *)0xE000ED0C)) #define NVIC_SYS_PRI2 (*((volatile U32 *)0xE000ED1C)) #define NVIC_SYS_PRI3 (*((volatile U32 *)0xE000ED20)) #define OS_PEND_IRQ() NVIC_INT_CTRL = (1<<28) #define OS_PENDING ((NVIC_INT_CTRL >> 26) & (1<<2 | 1)) #define OS_UNPEND(fl) NVIC_INT_CTRL = (*fl = OS_PENDING) << 25 #define OS_PEND(fl,p) NVIC_INT_CTRL = (fl | p<<2) << 26 #define OS_LOCK() NVIC_ST_CTRL = 0x0005 #define OS_UNLOCK() NVIC_ST_CTRL = 0x0007 #define OS_X_PENDING ((NVIC_INT_CTRL >> 28) & 1) #define OS_X_UNPEND(fl) NVIC_INT_CTRL = (*fl = OS_X_PENDING) << 27 #define OS_X_PEND(fl,p) NVIC_INT_CTRL = (fl | p) << 28 #if (__TARGET_ARCH_6S_M) #define OS_X_INIT(n) NVIC_IP[n>>2] |= 0xFF << (8*(n & 0x03)); \ NVIC_ISER[n>>5] = 1 << (n & 0x1F) #else #define OS_X_INIT(n) NVIC_IP[n] = 0xFF; \ NVIC_ISER[n>>5] = 1 << (n & 0x1F) #endif #define OS_X_LOCK(n) NVIC_ICER[n>>5] = 1 << (n & 0x1F) #define OS_X_UNLOCK(n) NVIC_ISER[n>>5] = 1 << (n & 0x1F) /* Core Debug registers */ #define DEMCR (*((volatile U32 *)0xE000EDFC)) /* ITM registers */ #define ITM_CONTROL (*((volatile U32 *)0xE0000E80)) #define ITM_ENABLE (*((volatile U32 *)0xE0000E00)) #define ITM_PORT30_U32 (*((volatile U32 *)0xE0000078)) #define ITM_PORT31_U32 (*((volatile U32 *)0xE000007C)) #define ITM_PORT31_U16 (*((volatile U16 *)0xE000007C)) #define ITM_PORT31_U8 (*((volatile U8 *)0xE000007C)) /* Variables */ extern BIT dbg_msg; /* Functions */ #ifdef __USE_EXCLUSIVE_ACCESS #define rt_inc(p) while(__strex((__ldrex(p)+1),p)) #define rt_dec(p) while(__strex((__ldrex(p)-1),p)) #else #define rt_inc(p) __disable_irq();(*p)++;__enable_irq(); #define rt_dec(p) __disable_irq();(*p)--;__enable_irq(); #endif static inline U32 rt_inc_qi (U32 size, U8 *count, U8 *first) { U32 cnt,c2; #ifdef __USE_EXCLUSIVE_ACCESS do { if ((cnt = __ldrex(count)) == size) { __clrex(); return (cnt); } } while (__strex(cnt+1, count)); do { c2 = (cnt = __ldrex(first)) + 1; if (c2 == size) c2 = 0; } while (__strex(c2, first)); #else __disable_irq(); if ((cnt = *count) < size) { *count = cnt+1; c2 = (cnt = *first) + 1; if (c2 == size) c2 = 0; *first = c2; } __enable_irq (); #endif return (cnt); } static inline void rt_systick_init (void) { NVIC_ST_RELOAD = os_trv; NVIC_ST_CURRENT = 0; NVIC_ST_CTRL = 0x0007; NVIC_SYS_PRI3 |= 0xFF000000; } static inline void rt_svc_init (void) { #if !(__TARGET_ARCH_6S_M) int sh,prigroup; #endif NVIC_SYS_PRI3 |= 0x00FF0000; #if (__TARGET_ARCH_6S_M) NVIC_SYS_PRI2 |= (NVIC_SYS_PRI3<<(8+1)) & 0xFC000000; #else sh = 8 - __clz (~((NVIC_SYS_PRI3 << 8) & 0xFF000000)); prigroup = ((NVIC_AIR_CTRL >> 8) & 0x07); if (prigroup >= sh) { sh = prigroup + 1; } NVIC_SYS_PRI2 = ((0xFEFFFFFF << sh) & 0xFF000000) | (NVIC_SYS_PRI2 & 0x00FFFFFF); #endif } extern void rt_init_stack (P_TCB p_TCB, FUNCP task_body); extern void rt_set_PSP (U32 stack); extern U32 rt_get_PSP (void); extern void os_set_env (void); extern void *_alloc_box (void *box_mem); extern int _free_box (void *box_mem, void *box); extern void dbg_init (void); extern void dbg_task_notify (P_TCB p_tcb, BOOL create); extern void dbg_task_switch (U32 task_id); #ifdef DBG_MSG #define DBG_INIT() dbg_init() #define DBG_TASK_NOTIFY(p_tcb,create) if (dbg_msg) dbg_task_notify(p_tcb,create) #define DBG_TASK_SWITCH(task_id) if (dbg_msg && (os_tsk.new!=os_tsk.run)) \ dbg_task_switch(task_id) #else #define DBG_INIT() #define DBG_TASK_NOTIFY(p_tcb,create) #define DBG_TASK_SWITCH(task_id) #endif /*---------------------------------------------------------------------------- * end of file *---------------------------------------------------------------------------*/