Arrow
Repostiory containing DAPLink source code with Reset Pin workaround for HANI_IOT board.
Upstream: https://github.com/ARMmbed/DAPLink
source/hic_hal/freescale/kl26z/usb_config.c
- Committer:
- Pawel Zarembski
- Date:
- 2020-04-07
- Revision:
- 0:01f31e923fe2
File content as of revision 0:01f31e923fe2:
/**
* @file usb_config.c
* @brief
*
* DAPLink Interface Firmware
* Copyright (c) 2009-2019, ARM Limited, All Rights Reserved
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#include "util.h"
// <e> USB Device
// <i> Enable the USB Device functionality
#define USBD_ENABLE 1
#define USBD_RTX_CORE_STACK 0
#define USBD_RTX_DEVICE_STACK 0
#define USBD_RTX_ENDPOINT0_STACK 0
// <o0.0> High-speed
// <i> Enable high-speed functionality (if device supports it)
#define USBD_HS_ENABLE 0
#if (defined(WEBUSB_INTERFACE) || defined(WINUSB_INTERFACE) || defined(WINUSB_INTERFACE))
#define USBD_BOS_ENABLE 1
#else
#define USBD_BOS_ENABLE 0
#endif
// <h> Device Settings
// <i> These settings affect Device Descriptor
// <o0> Power
// <i> Default Power Setting
// <0=> Bus-powered
// <1=> Self-powered
// <o1> Max Endpoint 0 Packet Size
// <i> Maximum packet size for endpoint zero (bMaxPacketSize0)
// <8=> 8 Bytes <16=> 16 Bytes <32=> 32 Bytes <64=> 64 Bytes
// <o2.0..15> Vendor ID <0x0000-0xFFFF>
// <i> Vendor ID assigned by the USB-IF (idVendor)
// <o3.0..15> Product ID <0x0000-0xFFFF>
// <i> Product ID assigned by the manufacturer (idProduct)
// <o4.0..15> Device Release Number <0x0000-0xFFFF>
// <i> Device release number in binary-coded decimal (bcdDevice)
// </h>
#define USBD_POWER 0
#define USBD_MAX_PACKET0 64
#define USBD_DEVDESC_IDVENDOR 0x0D28
#define USBD_DEVDESC_IDPRODUCT 0x0204
#define USBD_DEVDESC_BCDDEVICE 0x1000 //was 0x0100
// <h> Configuration Settings
// <i> These settings affect Configuration Descriptor
// <o0.5> Remote Wakeup
// <i> Configuration support for remote wakeup (D5: of bmAttributes)
// <o1.0..7> Maximum Power Consumption (in mA) <0-510><#/2>
// <i> Maximum power consumption of the USB device
// <i> from the bus in this specific configuration
// <i> when the device is fully operational (bMaxPower)
// </h>
#define USBD_CFGDESC_BMATTRIBUTES 0x80
#define USBD_CFGDESC_BMAXPOWER 0xFA
// <h> String Settings
// <i> These settings affect String Descriptor
// <o0.0..15> Language ID <0x0000-0xFCFF>
// <i> English (United States) = 0x0409
// <s0.126> Manufacturer String
// <i> String descriptor describing manufacturer
// <s1.126> Product String
// <i> String descriptor describing product
// <e1.0> Serial Number
// <i> Enable serial number string
// <i> If disabled serial number string will not be assigned to the USB Device
// <s2.126> Serial Number String
// <i> String descriptor describing device's serial number
// </e>
// </h>
#define USBD_STRDESC_LANGID 0x0409
#define USBD_STRDESC_MAN L"ARM"
#ifndef USB_PROD_STR
#define USBD_STRDESC_PROD L"DAPLink CMSIS-DAP"
#else
#define _TOWIDE(x) L ## #x
#define TOWIDE(x) _TOWIDE(x)
#define USBD_STRDESC_PROD TOWIDE(USB_PROD_STR)
#endif
#define USBD_STRDESC_SER_ENABLE 1
#define USBD_STRDESC_SER L"0001A0000000"
// <e0> Class Support
// <i> Enables USB Device Class specific Requests
#define USBD_CLASS_ENABLE 1
// <e0.0> Human Interface Device (HID)
// <i> Enable class support for Human Interface Device (HID)
// <h> Interrupt Endpoint Settings
// <o1.0..4> Interrupt In Endpoint Number <1=> 1 <2=> 2 <3=> 3
// <4=> 4 <5=> 5 <6=> 6 <7=> 7
// <8=> 8 <9=> 9 <10=> 10 <11=> 11
// <12=> 12 <13=> 13 <14=> 14 <15=> 15
// <o2.0..4> Interrupt Out Endpoint Number <0=> Not used <1=> 1 <2=> 2 <3=> 3
// <4=> 4 <5=> 5 <6=> 6 <7=> 7
// <8=> 8 <9=> 9 <10=> 10 <11=> 11
// <12=> 12 <13=> 13 <14=> 14 <15=> 15
// <i> If interrupt out endpoint is not used select "Not used"
// <h> Endpoint Settings
// <o3.0..7> Maximum Endpoint Packet Size (in bytes) <0-64>
// <o4.0..7> Endpoint polling Interval (in ms) <1-255>
// <e5> High-speed
// <i> If high-speed is enabled set endpoint settings for it
// <o6.0..10> Maximum Endpoint Packet Size (in bytes) <0-1024>
// <o6.11..12> Additional transactions per microframe <0=> None <1=> 1 additional <2=> 2 additional
// <o7.0..7> Endpoint polling Interval (in ms) <1=> 1 <2=> 2 <3=> 4 <4=> 8
// <5=> 16 <6=> 32 <7=> 64 <8=> 128
// <9=> 256 <10=> 512 <11=> 1024 <12=> 2048
// <13=> 4096 <14=> 8192 <15=> 16384 <16=> 32768
// </e>
// </h>
// </h>
// <h> Human Interface Device Settings
// <i> Device specific settings
// <s0.126> HID Interface String
// <o8.0..4> Number of Input Reports <1-32>
// <o9.0..4> Number of Output Reports <1-32>
// <o10.0..15> Maximum Input Report Size (in bytes) <1-65535>
// <o11.0..15> Maximum Output Report Size (in bytes) <1-65535>
// <o12.0..15> Maximum Feature Report Size (in bytes) <1-65535>
// </h>
// </e>
#ifndef HID_ENDPOINT
#define HID_ENDPOINT 0
#else
#define HID_ENDPOINT 1
#endif
#ifndef WEBUSB_INTERFACE
#define WEBUSB_INTERFACE 0
#else
#define WEBUSB_INTERFACE 1
#endif
#define USBD_HID_ENABLE HID_ENDPOINT
#define USBD_HID_EP_INTIN 1
#define USBD_HID_EP_INTOUT 1
#define USBD_HID_EP_INTIN_STACK 0
#define USBD_HID_WMAXPACKETSIZE 64
#define USBD_HID_BINTERVAL 1
#define USBD_HID_HS_ENABLE 0
#define USBD_HID_HS_WMAXPACKETSIZE 64
#define USBD_HID_HS_BINTERVAL 6
#define USBD_HID_STRDESC L"CMSIS-DAP v1"
#define USBD_WEBUSB_STRDESC L"WebUSB: CMSIS-DAP"
#define USBD_HID_INREPORT_NUM 1
#define USBD_HID_OUTREPORT_NUM 1
#define USBD_HID_INREPORT_MAX_SZ 64
#define USBD_HID_OUTREPORT_MAX_SZ 64
#define USBD_HID_FEATREPORT_MAX_SZ 1
// <e0.0> Mass Storage Device (MSC)
// <i> Enable class support for Mass Storage Device (MSC)
// <h> Bulk Endpoint Settings
// <o1.0..4> Bulk In Endpoint Number <1=> 1 <2=> 2 <3=> 3
// <4=> 4 <5=> 5 <6=> 6 <7=> 7
// <8=> 8 <9=> 9 <10=> 10 <11=> 11
// <12=> 12 <13=> 13 <14=> 14 <15=> 15
// <o2.0..4> Bulk Out Endpoint Number <1=> 1 <2=> 2 <3=> 3
// <4=> 4 <5=> 5 <6=> 6 <7=> 7
// <8=> 8 <9=> 9 <10=> 10 <11=> 11
// <12=> 12 <13=> 13 <14=> 14 <15=> 15
// <h> Endpoint Settings
// <o3> Maximum Packet Size <1-1024>
// <e4> High-speed
// <i> If high-speed is enabled set endpoint settings for it
// <o5> Maximum Packet Size <1-1024>
// <o6> Maximum NAK Rate <0-255>
// </e>
// </h>
// </h>
// <h> Mass Storage Device Settings
// <i> Device specific settings
// <s0.126> MSC Interface String
// <h> Inquiry Data
// <s1.8> Vendor Identification
// <s2.16> Product Identification
// <s3.4> Product Revision Level
// </h>
// </h>
// </e>
#ifndef MSC_ENDPOINT
#define MSC_ENDPOINT 0
#else
#define MSC_ENDPOINT 1
#endif
#define USBD_MSC_ENABLE MSC_ENDPOINT
#define USBD_MSC_EP_BULKIN 2
#define USBD_MSC_EP_BULKOUT 2
#define USBD_MSC_EP_BULKIN_STACK 0
#define USBD_MSC_WMAXPACKETSIZE 64
#define USBD_MSC_HS_ENABLE 0
#define USBD_MSC_HS_WMAXPACKETSIZE 512
#define USBD_MSC_HS_BINTERVAL 0
#define USBD_MSC_STRDESC L"USB_MSC"
// Make sure changes to USBD_MSC_INQUIRY_DATA are coordinated with mbed-ls
// since this is used to detect DAPLink drives
#define USBD_MSC_INQUIRY_DATA "MBED " \
"VFS " \
"0.1"
// <e0.0> Audio Device (ADC)
// <i> Enable class support for Audio Device (ADC)
// <h> Isochronous Endpoint Settings
// <o1.0..4> Isochronous Out Endpoint Number <1=> 1 <2=> 2 <3=> 3
// <4=> 4 <5=> 5 <6=> 6 <7=> 7
// <8=> 8 <9=> 9 <10=> 10 <11=> 11
// <12=> 12 <13=> 13 <14=> 14 <15=> 15
// <h> Endpoint Settings
// <o2.0..10> Maximum Endpoint Packet Size (in bytes) <0-1024>
// <o3.0..10> Endpoint polling Interval (in ms) <1=> 1 <2=> 2 <3=> 4 <4=> 8
// <5=> 16 <6=> 32 <7=> 64 <8=> 128
// <9=> 256 <10=> 512 <11=> 1024 <12=> 2048
// <13=> 4096 <14=> 8192 <15=> 16384 <16=> 32768
// <e4> High-speed
// <i> If high-speed is enabled set endpoint settings for it
// <o5.0..10> Maximum Endpoint Packet Size (in bytes) <0-1024>
// <o5.11..12> Additional transactions per microframe <0=> None <1=> 1 additional <2=> 2 additional
// </e>
// </h>
// </h>
// <h> Audio Device Settings
// <i> Device specific settings
// <s0.126> Audio Control Interface String
// <s1.126> Audio Streaming (Zero Bandwidth) Interface String
// <s2.126> Audio Streaming (Operational) Interface String
// <o6.0..7> Audio Subframe Size (in bytes) <0-255>
// <o7.0..7> Sample Resolution (in bits) <0-255>
// <o8.0..23> Sample Frequency (in Hz) <0-16777215>
// <o9> Packet Size (in bytes) <1-256>
// <o10> Packet Count <1-16>
// </h>
// </e>
#define USBD_ADC_ENABLE 0
#define USBD_ADC_EP_ISOOUT 3
#define USBD_ADC_WMAXPACKETSIZE 64
#define USBD_ADC_BINTERVAL 1
#define USBD_ADC_HS_ENABLE 0
#define USBD_ADC_HS_WMAXPACKETSIZE 64
#define USBD_ADC_CIF_STRDESC L"USB_ADC"
#define USBD_ADC_SIF1_STRDESC L"USB_ADC1"
#define USBD_ADC_SIF2_STRDESC L"USB_ADC2"
#define USBD_ADC_BSUBFRAMESIZE 2
#define USBD_ADC_BBITRESOLUTION 16
#define USBD_ADC_TSAMFREQ 32000
#define USBD_ADC_CFG_P_S 32
#define USBD_ADC_CFG_P_C 1
// <e0> Communication Device (CDC) - Abstract Control Model (ACM)
// <i> Enable class support for Communication Device (CDC) - Abstract Control Model (ACM)
// <h> Interrupt Endpoint Settings
// <o1.0..4> Interrupt In Endpoint Number <1=> 1 <2=> 2 <3=> 3
// <4=> 4 <5=> 5 <6=> 6 <7=> 7
// <8=> 8 <9=> 9 <10=> 10 <11=> 11
// <12=> 12 <13=> 13 <14=> 14 <15=> 15
// <h> Endpoint Settings
// <o2.0..10> Maximum Endpoint Packet Size (in bytes) <0-1024>
// <o3.0..10> Endpoint polling Interval (in ms) <0-255>
// <e4> High-speed
// <i> If high-speed is enabled set endpoint settings for it
// <o5.0..10> Maximum Endpoint Packet Size (in bytes) <0-1024>
// <o5.11..12> Additional transactions per microframe <0=> None <1=> 1 additional <2=> 2 additional
// <o6.0..10> Endpoint polling Interval (in ms) <1=> 1 <2=> 2 <3=> 4 <4=> 8
// <5=> 16 <6=> 32 <7=> 64 <8=> 128
// <9=> 256 <10=> 512 <11=> 1024 <12=> 2048
// <13=> 4096 <14=> 8192 <15=> 16384 <16=> 32768
// </e4>
// </h>
// </h>
// <h> Bulk Endpoint Settings
// <o7.0..4> Bulk In Endpoint Number <1=> 1 <2=> 2 <3=> 3
// <4=> 4 <5=> 5 <6=> 6 <7=> 7
// <8=> 8 <9=> 9 <10=> 10 <11=> 11
// <12=> 12 <13=> 13 <14=> 14 <15=> 15
// <o8.0..4> Bulk Out Endpoint Number <1=> 1 <2=> 2 <3=> 3
// <4=> 4 <5=> 5 <6=> 6 <7=> 7
// <8=> 8 <9=> 9 <10=> 10 <11=> 11
// <12=> 12 <13=> 13 <14=> 14 <15=> 15
// <h> Endpoint Settings
// <o9> Maximum Packet Size <1-1024>
// <e10> High-speed
// <i> If high-speed is enabled set endpoint settings for it
// <o11> Maximum Packet Size <1-1024>
// <o12> Maximum NAK Rate <0-255>
// </e10>
// </h>
// </h>
// <h> Communication Device Settings
// <i> Device specific settings
// <s0.126> Communication Class Interface String
// <s1.126> Data Class Interface String
// <o13> Maximum Communication Device Send Buffer Size
// <8=> 8 Bytes <16=> 16 Bytes <32=> 32 Bytes <64=> 64 Bytes <128=> 128 Bytes
// <256=> 256 Bytes <512=> 512 Bytes <1024=> 1024 Bytes
// <o14> Maximum Communication Device Receive Buffer Size
// <i> Minimum size must be as big as maximum packet size for Bulk Out Endpoint
// <8=> 8 Bytes <16=> 16 Bytes <32=> 32 Bytes <64=> 64 Bytes <128=> 128 Bytes
// <256=> 256 Bytes <512=> 512 Bytes <1024=> 1024 Bytes
// </h>
// </e>
#ifndef CDC_ENDPOINT
#define CDC_ENDPOINT 0
#else
#define CDC_ENDPOINT 1
#endif
#define USBD_CDC_ACM_ENABLE CDC_ENDPOINT
#define USBD_CDC_ACM_EP_INTIN 3
#define USBD_CDC_ACM_EP_INTIN_STACK 0
#define USBD_CDC_ACM_WMAXPACKETSIZE 16
#define USBD_CDC_ACM_BINTERVAL 32
#define USBD_CDC_ACM_HS_ENABLE 0
#define USBD_CDC_ACM_HS_WMAXPACKETSIZE 16
#define USBD_CDC_ACM_HS_BINTERVAL 2
#define USBD_CDC_ACM_EP_BULKIN 4
#define USBD_CDC_ACM_EP_BULKOUT 4
#define USBD_CDC_ACM_EP_BULKIN_STACK 0
#define USBD_CDC_ACM_WMAXPACKETSIZE1 64
#define USBD_CDC_ACM_HS_ENABLE1 0
#define USBD_CDC_ACM_HS_WMAXPACKETSIZE1 64
#define USBD_CDC_ACM_HS_BINTERVAL1 0
#define USBD_CDC_ACM_CIF_STRDESC L"mbed Serial Port"
#define USBD_CDC_ACM_DIF_STRDESC L"mbed Serial Port"
#define USBD_CDC_ACM_SENDBUF_SIZE 64
#define USBD_CDC_ACM_RECEIVEBUF_SIZE 64
#if (((USBD_CDC_ACM_HS_ENABLE1) && (USBD_CDC_ACM_SENDBUF_SIZE < USBD_CDC_ACM_HS_WMAXPACKETSIZE1)) || (USBD_CDC_ACM_SENDBUF_SIZE < USBD_CDC_ACM_WMAXPACKETSIZE1))
#error "Send Buffer size must be larger or equal to Bulk In maximum packet size!"
#endif
#if (((USBD_CDC_ACM_HS_ENABLE1) && (USBD_CDC_ACM_RECEIVEBUF_SIZE < USBD_CDC_ACM_HS_WMAXPACKETSIZE1)) || (USBD_CDC_ACM_RECEIVEBUF_SIZE < USBD_CDC_ACM_WMAXPACKETSIZE1))
#error "Receive Buffer size must be larger or equal to Bulk Out maximum packet size!"
#endif
// <e0> Custom Class Device
// <i> Enables USB Custom Class Requests
// <i> Class IDs:
// <i> 0x00 - Class Reserved ID
// <i> 0x01 - Class Audio ID
// <i> 0x02 - Class Communications ID
// <i> 0x03 - Class Human Interface ID
// <i> 0x04 - Class Monitor ID
// <i> 0x05 - Class Physical Interface ID
// <i> 0x06 - Class Power ID
// <i> 0x07 - Class Printer ID
// <i> 0x08 - Class Storage ID
// <i> 0x09 - Class HUB ID
// <i> 0xEF - Class Miscellaneous ID
// <i> 0xFF - Class Vendor Specific ID
// </e>
#define USBD_CLS_ENABLE 0
// WebUSB support
#define USBD_WEBUSB_ENABLE WEBUSB_INTERFACE
#define USBD_WEBUSB_VENDOR_CODE 0x21
#define USBD_WEBUSB_LANDING_URL "os.mbed.com/webusb/landing-page/?bid="
#define USBD_WEBUSB_ORIGIN_URL "os.mbed.com/"
// Microsoft OS Descriptors 2.0 (WinUSB) support
#define USBD_WINUSB_ENABLE WINUSB_INTERFACE
#define USBD_WINUSB_VENDOR_CODE 0x20
// </e>
// </e>
#ifndef BULK_ENDPOINT
#define BULK_ENDPOINT 0
#else
#define BULK_ENDPOINT 1
#endif
#define USBD_BULK_ENABLE BULK_ENDPOINT
#define USBD_BULK_EP_BULKIN 5
#define USBD_BULK_EP_BULKOUT 5
#define USBD_BULK_WMAXPACKETSIZE 64
#define USBD_BULK_HS_ENABLE 0
#define USBD_BULK_HS_WMAXPACKETSIZE 512
#define USBD_BULK_STRDESC L"CMSIS-DAP v2"
/* USB Device Calculations ---------------------------------------------------*/
#define USBD_IF_NUM_MAX (USBD_BULK_ENABLE+USBD_WEBUSB_ENABLE+USBD_HID_ENABLE+USBD_MSC_ENABLE+(USBD_ADC_ENABLE*2)+(USBD_CDC_ACM_ENABLE*2)+USBD_CLS_ENABLE)
#define USBD_MULTI_IF (USBD_CDC_ACM_ENABLE*(USBD_HID_ENABLE|USBD_MSC_ENABLE|USBD_ADC_ENABLE|USBD_CLS_ENABLE|USBD_WEBUSB_ENABLE|USBD_BULK_ENABLE))
// #define MAX(x, y) (((x) < (y)) ? (y) : (x))
#define USBD_EP_NUM_CALC0 MAX((USBD_HID_ENABLE *(USBD_HID_EP_INTIN )), (USBD_HID_ENABLE *(USBD_HID_EP_INTOUT!=0)*(USBD_HID_EP_INTOUT)))
#define USBD_EP_NUM_CALC1 MAX((USBD_MSC_ENABLE *(USBD_MSC_EP_BULKIN )), (USBD_MSC_ENABLE *(USBD_MSC_EP_BULKOUT)))
#define USBD_EP_NUM_CALC2 MAX((USBD_ADC_ENABLE *(USBD_ADC_EP_ISOOUT )), (USBD_CDC_ACM_ENABLE*(USBD_CDC_ACM_EP_INTIN)))
#define USBD_EP_NUM_CALC3 MAX((USBD_CDC_ACM_ENABLE*(USBD_CDC_ACM_EP_BULKIN)), (USBD_CDC_ACM_ENABLE*(USBD_CDC_ACM_EP_BULKOUT)))
#define USBD_EP_NUM_CALC4 MAX(USBD_EP_NUM_CALC0, USBD_EP_NUM_CALC1)
#define USBD_EP_NUM_CALC5 MAX(USBD_EP_NUM_CALC2, USBD_EP_NUM_CALC3)
#define USBD_EP_NUM_CALC6 MAX(USBD_EP_NUM_CALC4, USBD_EP_NUM_CALC5)
#define USBD_EP_NUM_CALC7 MAX((USBD_BULK_ENABLE*(USBD_BULK_EP_BULKIN)), (USBD_BULK_ENABLE*(USBD_BULK_EP_BULKOUT)))
#define USBD_EP_NUM MAX(USBD_EP_NUM_CALC6, USBD_EP_NUM_CALC7)
#if (USBD_HID_ENABLE)
#if (USBD_MSC_ENABLE)
#if ((((USBD_HID_EP_INTIN == USBD_MSC_EP_BULKIN) || \
(USBD_HID_EP_INTIN == USBD_MSC_EP_BULKOUT))) || \
((USBD_HID_EP_INTOUT != 0) && \
(USBD_HID_EP_INTOUT == USBD_MSC_EP_BULKIN) || \
(USBD_HID_EP_INTOUT == USBD_MSC_EP_BULKOUT)))
#error "HID and Mass Storage Device Interface can not use same Endpoints!"
#endif
#endif
#if (USBD_ADC_ENABLE)
#if ((USBD_HID_EP_INTIN == USBD_ADC_EP_ISOOUT) || \
((USBD_HID_EP_INTOUT != 0) && \
(USBD_HID_EP_INTOUT == USBD_ADC_EP_ISOOUT)))
#error "HID and Audio Device Interface can not use same Endpoints!"
#endif
#endif
#if (USBD_CDC_ACM_ENABLE)
#if (((USBD_HID_EP_INTIN == USBD_CDC_ACM_EP_INTIN) || \
(USBD_HID_EP_INTIN == USBD_CDC_ACM_EP_BULKIN) || \
(USBD_HID_EP_INTIN == USBD_CDC_ACM_EP_BULKOUT))|| \
((USBD_HID_EP_INTOUT != 0) && \
((USBD_HID_EP_INTOUT == USBD_CDC_ACM_EP_INTIN) || \
(USBD_HID_EP_INTOUT == USBD_CDC_ACM_EP_BULKIN) || \
(USBD_HID_EP_INTOUT == USBD_CDC_ACM_EP_BULKOUT))))
#error "HID and Communication Device Interface can not use same Endpoints!"
#endif
#endif
#endif
#if (USBD_MSC_ENABLE)
#if (USBD_ADC_ENABLE)
#if ((USBD_MSC_EP_BULKIN == USBD_ADC_EP_ISOOUT) || \
(USBD_MSC_EP_BULKOUT == USBD_ADC_EP_ISOOUT))
#error "Mass Storage Device and Audio Device Interface can not use same Endpoints!"
#endif
#endif
#if (USBD_CDC_ACM_ENABLE)
#if ((USBD_MSC_EP_BULKIN == USBD_CDC_ACM_EP_INTIN) || \
(USBD_MSC_EP_BULKIN == USBD_CDC_ACM_EP_BULKIN) || \
(USBD_MSC_EP_BULKIN == USBD_CDC_ACM_EP_BULKOUT) || \
(USBD_MSC_EP_BULKOUT == USBD_CDC_ACM_EP_INTIN) || \
(USBD_MSC_EP_BULKOUT == USBD_CDC_ACM_EP_BULKIN) || \
(USBD_MSC_EP_BULKOUT == USBD_CDC_ACM_EP_BULKOUT))
#error "Mass Storage Device and Communication Device Interface can not use same Endpoints!"
#endif
#endif
#endif
#if (USBD_ADC_ENABLE)
#if (USBD_CDC_ACM_ENABLE)
#if ((USBD_ADC_EP_ISOOUT == USBD_CDC_ACM_EP_INTIN) || \
(USBD_ADC_EP_ISOOUT == USBD_CDC_ACM_EP_BULKIN) || \
(USBD_ADC_EP_ISOOUT == USBD_CDC_ACM_EP_BULKOUT))
#error "Audio Device and Communication Device Interface can not use same Endpoints!"
#endif
#endif
#endif
#define USBD_ADC_CIF_NUM (0)
#define USBD_ADC_SIF1_NUM (1)
#define USBD_ADC_SIF2_NUM (2)
#define USBD_ADC_CIF_STR_NUM (3+USBD_STRDESC_SER_ENABLE+0)
#define USBD_ADC_SIF1_STR_NUM (3+USBD_STRDESC_SER_ENABLE+1)
#define USBD_ADC_SIF2_STR_NUM (3+USBD_STRDESC_SER_ENABLE+2)
#define USBD_CDC_ACM_CIF_STR_NUM (3+USBD_STRDESC_SER_ENABLE+USBD_ADC_ENABLE*3+0)
#define USBD_CDC_ACM_DIF_STR_NUM (3+USBD_STRDESC_SER_ENABLE+USBD_ADC_ENABLE*3+1)
#define USBD_HID_IF_STR_NUM (3+USBD_STRDESC_SER_ENABLE+USBD_ADC_ENABLE*3+USBD_CDC_ACM_ENABLE*2)
#define USBD_WEBUSB_IF_STR_NUM (3+USBD_STRDESC_SER_ENABLE+USBD_ADC_ENABLE*3+USBD_CDC_ACM_ENABLE*2+USBD_HID_ENABLE)
#define USBD_MSC_IF_STR_NUM (3+USBD_STRDESC_SER_ENABLE+USBD_ADC_ENABLE*3+USBD_CDC_ACM_ENABLE*2+USBD_HID_ENABLE+USBD_WEBUSB_ENABLE)
#define USBD_BULK_IF_STR_NUM (3+USBD_STRDESC_SER_ENABLE+USBD_ADC_ENABLE*3+USBD_CDC_ACM_ENABLE*2+USBD_HID_ENABLE+USBD_WEBUSB_ENABLE+USBD_BULK_ENABLE)
#if (USBD_HID_ENABLE)
#if (USBD_HID_HS_ENABLE)
#define USBD_HID_MAX_PACKET ((USBD_HID_HS_WMAXPACKETSIZE > USBD_HID_WMAXPACKETSIZE) ? USBD_HID_HS_WMAXPACKETSIZE : USBD_HID_WMAXPACKETSIZE)
#else
#define USBD_HID_MAX_PACKET (USBD_HID_WMAXPACKETSIZE)
#endif
#else
#define USBD_HID_MAX_PACKET (0)
#endif
#if (USBD_MSC_ENABLE)
#if (USBD_MSC_HS_ENABLE)
#define USBD_MSC_MAX_PACKET ((USBD_MSC_HS_WMAXPACKETSIZE > USBD_MSC_WMAXPACKETSIZE) ? USBD_MSC_HS_WMAXPACKETSIZE : USBD_MSC_WMAXPACKETSIZE)
#else
#define USBD_MSC_MAX_PACKET (USBD_MSC_WMAXPACKETSIZE)
#endif
#else
#define USBD_MSC_MAX_PACKET (0)
#endif
#if (USBD_ADC_ENABLE)
#if (USBD_ADC_HS_ENABLE)
#define USBD_ADC_MAX_PACKET ((USBD_ADC_HS_WMAXPACKETSIZE > USBD_ADC_WMAXPACKETSIZE) ? USBD_ADC_HS_WMAXPACKETSIZE : USBD_ADC_WMAXPACKETSIZE)
#else
#define USBD_ADC_MAX_PACKET (USBD_ADC_WMAXPACKETSIZE)
#endif
#else
#define USBD_ADC_MAX_PACKET (0)
#endif
#if (USBD_CDC_ACM_ENABLE)
#if (USBD_CDC_ACM_HS_ENABLE)
#define USBD_CDC_ACM_MAX_PACKET ((USBD_CDC_ACM_HS_WMAXPACKETSIZE > USBD_CDC_ACM_WMAXPACKETSIZE) ? USBD_CDC_ACM_HS_WMAXPACKETSIZE : USBD_CDC_ACM_WMAXPACKETSIZE)
#else
#define USBD_CDC_ACM_MAX_PACKET (USBD_CDC_ACM_WMAXPACKETSIZE)
#endif
#if (USBD_CDC_ACM_HS_ENABLE1)
#define USBD_CDC_ACM_MAX_PACKET1 ((USBD_CDC_ACM_HS_WMAXPACKETSIZE1 > USBD_CDC_ACM_WMAXPACKETSIZE1) ? USBD_CDC_ACM_HS_WMAXPACKETSIZE1 : USBD_CDC_ACM_WMAXPACKETSIZE1)
#else
#define USBD_CDC_ACM_MAX_PACKET1 (USBD_CDC_ACM_WMAXPACKETSIZE1)
#endif
#else
#define USBD_CDC_ACM_MAX_PACKET (0)
#define USBD_CDC_ACM_MAX_PACKET1 (0)
#endif
#if (USBD_BULK_ENABLE)
#if (USBD_BULK_HS_ENABLE)
#define USBD_BULK_MAX_PACKET ((USBD_BULK_HS_WMAXPACKETSIZE > USBD_BULK_WMAXPACKETSIZE) ? USBD_BULK_HS_WMAXPACKETSIZE : USBD_BULK_WMAXPACKETSIZE)
#else
#define USBD_BULK_MAX_PACKET (USBD_BULK_WMAXPACKETSIZE)
#endif
#else
#define USBD_BULK_MAX_PACKET (0)
#endif
#define USBD_MAX_PACKET_CALC0 ((USBD_HID_MAX_PACKET > USBD_HID_MAX_PACKET ) ? (USBD_HID_MAX_PACKET ) : (USBD_HID_MAX_PACKET ))
#define USBD_MAX_PACKET_CALC1 ((USBD_ADC_MAX_PACKET > USBD_CDC_ACM_MAX_PACKET ) ? (USBD_ADC_MAX_PACKET ) : (USBD_CDC_ACM_MAX_PACKET ))
#define USBD_MAX_PACKET_CALC2 ((USBD_MAX_PACKET_CALC0 > USBD_MAX_PACKET_CALC1 ) ? (USBD_MAX_PACKET_CALC0) : (USBD_MAX_PACKET_CALC1 ))
#define USBD_MAX_PACKET_CALC3 ((USBD_BULK_MAX_PACKET > USBD_CDC_ACM_MAX_PACKET1 ) ? (USBD_BULK_MAX_PACKET) : (USBD_CDC_ACM_MAX_PACKET1 ))
#define USBD_MAX_PACKET ((USBD_MAX_PACKET_CALC3 > USBD_MAX_PACKET_CALC2 ) ? (USBD_MAX_PACKET_CALC3) : (USBD_MAX_PACKET_CALC2 ))
/*------------------------------------------------------------------------------
* USB Config Functions
*----------------------------------------------------------------------------*/
#ifndef __USB_CONFIG___
#define __USB_CONFIG__
#ifndef __NO_USB_LIB_C
#include "usb_lib.c"
#endif
#endif /* __USB_CONFIG__ */