Repostiory containing DAPLink source code with Reset Pin workaround for HANI_IOT board.
Upstream: https://github.com/ARMmbed/DAPLink
source/hic_hal/atmel/sam3u2c/instance/usart2.h
- Committer:
- Pawel Zarembski
- Date:
- 2020-04-07
- Revision:
- 0:01f31e923fe2
File content as of revision 0:01f31e923fe2:
/* ---------------------------------------------------------------------------- */ /* Atmel Microcontroller Software Support */ /* SAM Software Package License */ /* ---------------------------------------------------------------------------- */ /* Copyright (c) %copyright_year%, Atmel Corporation */ /* */ /* All rights reserved. */ /* */ /* Redistribution and use in source and binary forms, with or without */ /* modification, are permitted provided that the following condition is met: */ /* */ /* - Redistributions of source code must retain the above copyright notice, */ /* this list of conditions and the disclaimer below. */ /* */ /* Atmel's name may not be used to endorse or promote products derived from */ /* this software without specific prior written permission. */ /* */ /* DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR */ /* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF */ /* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE */ /* DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT, */ /* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT */ /* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, */ /* OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF */ /* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING */ /* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, */ /* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ /* ---------------------------------------------------------------------------- */ #ifndef _SAM3U_USART2_INSTANCE_ #define _SAM3U_USART2_INSTANCE_ /* ========== Register definition for USART2 peripheral ========== */ #if (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) #define REG_USART2_CR (0x40098000U) /**< \brief (USART2) Control Register */ #define REG_USART2_MR (0x40098004U) /**< \brief (USART2) Mode Register */ #define REG_USART2_IER (0x40098008U) /**< \brief (USART2) Interrupt Enable Register */ #define REG_USART2_IDR (0x4009800CU) /**< \brief (USART2) Interrupt Disable Register */ #define REG_USART2_IMR (0x40098010U) /**< \brief (USART2) Interrupt Mask Register */ #define REG_USART2_CSR (0x40098014U) /**< \brief (USART2) Channel Status Register */ #define REG_USART2_RHR (0x40098018U) /**< \brief (USART2) Receiver Holding Register */ #define REG_USART2_THR (0x4009801CU) /**< \brief (USART2) Transmitter Holding Register */ #define REG_USART2_BRGR (0x40098020U) /**< \brief (USART2) Baud Rate Generator Register */ #define REG_USART2_RTOR (0x40098024U) /**< \brief (USART2) Receiver Time-out Register */ #define REG_USART2_TTGR (0x40098028U) /**< \brief (USART2) Transmitter Timeguard Register */ #define REG_USART2_FIDI (0x40098040U) /**< \brief (USART2) FI DI Ratio Register */ #define REG_USART2_NER (0x40098044U) /**< \brief (USART2) Number of Errors Register */ #define REG_USART2_IF (0x4009804CU) /**< \brief (USART2) IrDA Filter Register */ #define REG_USART2_MAN (0x40098050U) /**< \brief (USART2) Manchester Encoder Decoder Register */ #define REG_USART2_WPMR (0x400980E4U) /**< \brief (USART2) Write Protect Mode Register */ #define REG_USART2_WPSR (0x400980E8U) /**< \brief (USART2) Write Protect Status Register */ #define REG_USART2_RPR (0x40098100U) /**< \brief (USART2) Receive Pointer Register */ #define REG_USART2_RCR (0x40098104U) /**< \brief (USART2) Receive Counter Register */ #define REG_USART2_TPR (0x40098108U) /**< \brief (USART2) Transmit Pointer Register */ #define REG_USART2_TCR (0x4009810CU) /**< \brief (USART2) Transmit Counter Register */ #define REG_USART2_RNPR (0x40098110U) /**< \brief (USART2) Receive Next Pointer Register */ #define REG_USART2_RNCR (0x40098114U) /**< \brief (USART2) Receive Next Counter Register */ #define REG_USART2_TNPR (0x40098118U) /**< \brief (USART2) Transmit Next Pointer Register */ #define REG_USART2_TNCR (0x4009811CU) /**< \brief (USART2) Transmit Next Counter Register */ #define REG_USART2_PTCR (0x40098120U) /**< \brief (USART2) Transfer Control Register */ #define REG_USART2_PTSR (0x40098124U) /**< \brief (USART2) Transfer Status Register */ #else #define REG_USART2_CR (*(WoReg*)0x40098000U) /**< \brief (USART2) Control Register */ #define REG_USART2_MR (*(RwReg*)0x40098004U) /**< \brief (USART2) Mode Register */ #define REG_USART2_IER (*(WoReg*)0x40098008U) /**< \brief (USART2) Interrupt Enable Register */ #define REG_USART2_IDR (*(WoReg*)0x4009800CU) /**< \brief (USART2) Interrupt Disable Register */ #define REG_USART2_IMR (*(RoReg*)0x40098010U) /**< \brief (USART2) Interrupt Mask Register */ #define REG_USART2_CSR (*(RoReg*)0x40098014U) /**< \brief (USART2) Channel Status Register */ #define REG_USART2_RHR (*(RoReg*)0x40098018U) /**< \brief (USART2) Receiver Holding Register */ #define REG_USART2_THR (*(WoReg*)0x4009801CU) /**< \brief (USART2) Transmitter Holding Register */ #define REG_USART2_BRGR (*(RwReg*)0x40098020U) /**< \brief (USART2) Baud Rate Generator Register */ #define REG_USART2_RTOR (*(RwReg*)0x40098024U) /**< \brief (USART2) Receiver Time-out Register */ #define REG_USART2_TTGR (*(RwReg*)0x40098028U) /**< \brief (USART2) Transmitter Timeguard Register */ #define REG_USART2_FIDI (*(RwReg*)0x40098040U) /**< \brief (USART2) FI DI Ratio Register */ #define REG_USART2_NER (*(RoReg*)0x40098044U) /**< \brief (USART2) Number of Errors Register */ #define REG_USART2_IF (*(RwReg*)0x4009804CU) /**< \brief (USART2) IrDA Filter Register */ #define REG_USART2_MAN (*(RwReg*)0x40098050U) /**< \brief (USART2) Manchester Encoder Decoder Register */ #define REG_USART2_WPMR (*(RwReg*)0x400980E4U) /**< \brief (USART2) Write Protect Mode Register */ #define REG_USART2_WPSR (*(RoReg*)0x400980E8U) /**< \brief (USART2) Write Protect Status Register */ #define REG_USART2_RPR (*(RwReg*)0x40098100U) /**< \brief (USART2) Receive Pointer Register */ #define REG_USART2_RCR (*(RwReg*)0x40098104U) /**< \brief (USART2) Receive Counter Register */ #define REG_USART2_TPR (*(RwReg*)0x40098108U) /**< \brief (USART2) Transmit Pointer Register */ #define REG_USART2_TCR (*(RwReg*)0x4009810CU) /**< \brief (USART2) Transmit Counter Register */ #define REG_USART2_RNPR (*(RwReg*)0x40098110U) /**< \brief (USART2) Receive Next Pointer Register */ #define REG_USART2_RNCR (*(RwReg*)0x40098114U) /**< \brief (USART2) Receive Next Counter Register */ #define REG_USART2_TNPR (*(RwReg*)0x40098118U) /**< \brief (USART2) Transmit Next Pointer Register */ #define REG_USART2_TNCR (*(RwReg*)0x4009811CU) /**< \brief (USART2) Transmit Next Counter Register */ #define REG_USART2_PTCR (*(WoReg*)0x40098120U) /**< \brief (USART2) Transfer Control Register */ #define REG_USART2_PTSR (*(RoReg*)0x40098124U) /**< \brief (USART2) Transfer Status Register */ #endif /* (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ #endif /* _SAM3U_USART2_INSTANCE_ */