Repostiory containing DAPLink source code with Reset Pin workaround for HANI_IOT board.

Upstream: https://github.com/ARMmbed/DAPLink

source/hic_hal/atmel/sam3u2c/instance/usart0.h

Committer:
Pawel Zarembski
Date:
2020-04-07
Revision:
0:01f31e923fe2

File content as of revision 0:01f31e923fe2:

/* ---------------------------------------------------------------------------- */
/*                  Atmel Microcontroller Software Support                      */
/*                       SAM Software Package License                           */
/* ---------------------------------------------------------------------------- */
/* Copyright (c) %copyright_year%, Atmel Corporation                                        */
/*                                                                              */
/* All rights reserved.                                                         */
/*                                                                              */
/* Redistribution and use in source and binary forms, with or without           */
/* modification, are permitted provided that the following condition is met:    */
/*                                                                              */
/* - Redistributions of source code must retain the above copyright notice,     */
/* this list of conditions and the disclaimer below.                            */
/*                                                                              */
/* Atmel's name may not be used to endorse or promote products derived from     */
/* this software without specific prior written permission.                     */
/*                                                                              */
/* DISCLAIMER:  THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR   */
/* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF */
/* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE   */
/* DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,      */
/* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT */
/* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,  */
/* OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF    */
/* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING         */
/* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, */
/* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.                           */
/* ---------------------------------------------------------------------------- */

#ifndef _SAM3U_USART0_INSTANCE_
#define _SAM3U_USART0_INSTANCE_

/* ========== Register definition for USART0 peripheral ========== */
#if (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
#define REG_USART0_CR          (0x40090000U) /**< \brief (USART0) Control Register */
#define REG_USART0_MR          (0x40090004U) /**< \brief (USART0) Mode Register */
#define REG_USART0_IER          (0x40090008U) /**< \brief (USART0) Interrupt Enable Register */
#define REG_USART0_IDR          (0x4009000CU) /**< \brief (USART0) Interrupt Disable Register */
#define REG_USART0_IMR          (0x40090010U) /**< \brief (USART0) Interrupt Mask Register */
#define REG_USART0_CSR          (0x40090014U) /**< \brief (USART0) Channel Status Register */
#define REG_USART0_RHR          (0x40090018U) /**< \brief (USART0) Receiver Holding Register */
#define REG_USART0_THR          (0x4009001CU) /**< \brief (USART0) Transmitter Holding Register */
#define REG_USART0_BRGR          (0x40090020U) /**< \brief (USART0) Baud Rate Generator Register */
#define REG_USART0_RTOR          (0x40090024U) /**< \brief (USART0) Receiver Time-out Register */
#define REG_USART0_TTGR          (0x40090028U) /**< \brief (USART0) Transmitter Timeguard Register */
#define REG_USART0_FIDI          (0x40090040U) /**< \brief (USART0) FI DI Ratio Register */
#define REG_USART0_NER          (0x40090044U) /**< \brief (USART0) Number of Errors Register */
#define REG_USART0_IF          (0x4009004CU) /**< \brief (USART0) IrDA Filter Register */
#define REG_USART0_MAN          (0x40090050U) /**< \brief (USART0) Manchester Encoder Decoder Register */
#define REG_USART0_WPMR          (0x400900E4U) /**< \brief (USART0) Write Protect Mode Register */
#define REG_USART0_WPSR          (0x400900E8U) /**< \brief (USART0) Write Protect Status Register */
#define REG_USART0_RPR          (0x40090100U) /**< \brief (USART0) Receive Pointer Register */
#define REG_USART0_RCR          (0x40090104U) /**< \brief (USART0) Receive Counter Register */
#define REG_USART0_TPR          (0x40090108U) /**< \brief (USART0) Transmit Pointer Register */
#define REG_USART0_TCR          (0x4009010CU) /**< \brief (USART0) Transmit Counter Register */
#define REG_USART0_RNPR          (0x40090110U) /**< \brief (USART0) Receive Next Pointer Register */
#define REG_USART0_RNCR          (0x40090114U) /**< \brief (USART0) Receive Next Counter Register */
#define REG_USART0_TNPR          (0x40090118U) /**< \brief (USART0) Transmit Next Pointer Register */
#define REG_USART0_TNCR          (0x4009011CU) /**< \brief (USART0) Transmit Next Counter Register */
#define REG_USART0_PTCR          (0x40090120U) /**< \brief (USART0) Transfer Control Register */
#define REG_USART0_PTSR          (0x40090124U) /**< \brief (USART0) Transfer Status Register */
#else
#define REG_USART0_CR (*(WoReg*)0x40090000U) /**< \brief (USART0) Control Register */
#define REG_USART0_MR (*(RwReg*)0x40090004U) /**< \brief (USART0) Mode Register */
#define REG_USART0_IER (*(WoReg*)0x40090008U) /**< \brief (USART0) Interrupt Enable Register */
#define REG_USART0_IDR (*(WoReg*)0x4009000CU) /**< \brief (USART0) Interrupt Disable Register */
#define REG_USART0_IMR (*(RoReg*)0x40090010U) /**< \brief (USART0) Interrupt Mask Register */
#define REG_USART0_CSR (*(RoReg*)0x40090014U) /**< \brief (USART0) Channel Status Register */
#define REG_USART0_RHR (*(RoReg*)0x40090018U) /**< \brief (USART0) Receiver Holding Register */
#define REG_USART0_THR (*(WoReg*)0x4009001CU) /**< \brief (USART0) Transmitter Holding Register */
#define REG_USART0_BRGR (*(RwReg*)0x40090020U) /**< \brief (USART0) Baud Rate Generator Register */
#define REG_USART0_RTOR (*(RwReg*)0x40090024U) /**< \brief (USART0) Receiver Time-out Register */
#define REG_USART0_TTGR (*(RwReg*)0x40090028U) /**< \brief (USART0) Transmitter Timeguard Register */
#define REG_USART0_FIDI (*(RwReg*)0x40090040U) /**< \brief (USART0) FI DI Ratio Register */
#define REG_USART0_NER (*(RoReg*)0x40090044U) /**< \brief (USART0) Number of Errors Register */
#define REG_USART0_IF (*(RwReg*)0x4009004CU) /**< \brief (USART0) IrDA Filter Register */
#define REG_USART0_MAN (*(RwReg*)0x40090050U) /**< \brief (USART0) Manchester Encoder Decoder Register */
#define REG_USART0_WPMR (*(RwReg*)0x400900E4U) /**< \brief (USART0) Write Protect Mode Register */
#define REG_USART0_WPSR (*(RoReg*)0x400900E8U) /**< \brief (USART0) Write Protect Status Register */
#define REG_USART0_RPR (*(RwReg*)0x40090100U) /**< \brief (USART0) Receive Pointer Register */
#define REG_USART0_RCR (*(RwReg*)0x40090104U) /**< \brief (USART0) Receive Counter Register */
#define REG_USART0_TPR (*(RwReg*)0x40090108U) /**< \brief (USART0) Transmit Pointer Register */
#define REG_USART0_TCR (*(RwReg*)0x4009010CU) /**< \brief (USART0) Transmit Counter Register */
#define REG_USART0_RNPR (*(RwReg*)0x40090110U) /**< \brief (USART0) Receive Next Pointer Register */
#define REG_USART0_RNCR (*(RwReg*)0x40090114U) /**< \brief (USART0) Receive Next Counter Register */
#define REG_USART0_TNPR (*(RwReg*)0x40090118U) /**< \brief (USART0) Transmit Next Pointer Register */
#define REG_USART0_TNCR (*(RwReg*)0x4009011CU) /**< \brief (USART0) Transmit Next Counter Register */
#define REG_USART0_PTCR (*(WoReg*)0x40090120U) /**< \brief (USART0) Transfer Control Register */
#define REG_USART0_PTSR (*(RoReg*)0x40090124U) /**< \brief (USART0) Transfer Status Register */
#endif /* (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */

#endif /* _SAM3U_USART0_INSTANCE_ */