Repostiory containing DAPLink source code with Reset Pin workaround for HANI_IOT board.
Upstream: https://github.com/ARMmbed/DAPLink
source/hic_hal/atmel/sam3u2c/instance/adc12b.h
- Committer:
- Pawel Zarembski
- Date:
- 2020-04-07
- Revision:
- 0:01f31e923fe2
File content as of revision 0:01f31e923fe2:
/* ---------------------------------------------------------------------------- */ /* Atmel Microcontroller Software Support */ /* SAM Software Package License */ /* ---------------------------------------------------------------------------- */ /* Copyright (c) %copyright_year%, Atmel Corporation */ /* */ /* All rights reserved. */ /* */ /* Redistribution and use in source and binary forms, with or without */ /* modification, are permitted provided that the following condition is met: */ /* */ /* - Redistributions of source code must retain the above copyright notice, */ /* this list of conditions and the disclaimer below. */ /* */ /* Atmel's name may not be used to endorse or promote products derived from */ /* this software without specific prior written permission. */ /* */ /* DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR */ /* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF */ /* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE */ /* DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT, */ /* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT */ /* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, */ /* OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF */ /* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING */ /* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, */ /* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ /* ---------------------------------------------------------------------------- */ #ifndef _SAM3U_ADC12B_INSTANCE_ #define _SAM3U_ADC12B_INSTANCE_ /* ========== Register definition for ADC12B peripheral ========== */ #if (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) #define REG_ADC12B_CR (0x400A8000U) /**< \brief (ADC12B) Control Register */ #define REG_ADC12B_MR (0x400A8004U) /**< \brief (ADC12B) Mode Register */ #define REG_ADC12B_CHER (0x400A8010U) /**< \brief (ADC12B) Channel Enable Register */ #define REG_ADC12B_CHDR (0x400A8014U) /**< \brief (ADC12B) Channel Disable Register */ #define REG_ADC12B_CHSR (0x400A8018U) /**< \brief (ADC12B) Channel Status Register */ #define REG_ADC12B_SR (0x400A801CU) /**< \brief (ADC12B) Status Register */ #define REG_ADC12B_LCDR (0x400A8020U) /**< \brief (ADC12B) Last Converted Data Register */ #define REG_ADC12B_IER (0x400A8024U) /**< \brief (ADC12B) Interrupt Enable Register */ #define REG_ADC12B_IDR (0x400A8028U) /**< \brief (ADC12B) Interrupt Disable Register */ #define REG_ADC12B_IMR (0x400A802CU) /**< \brief (ADC12B) Interrupt Mask Register */ #define REG_ADC12B_CDR (0x400A8030U) /**< \brief (ADC12B) Channel Data Register */ #define REG_ADC12B_ACR (0x400A8064U) /**< \brief (ADC12B) Analog Control Register */ #define REG_ADC12B_EMR (0x400A8068U) /**< \brief (ADC12B) Extended Mode Register */ #define REG_ADC12B_RPR (0x400A8100U) /**< \brief (ADC12B) Receive Pointer Register */ #define REG_ADC12B_RCR (0x400A8104U) /**< \brief (ADC12B) Receive Counter Register */ #define REG_ADC12B_RNPR (0x400A8110U) /**< \brief (ADC12B) Receive Next Pointer Register */ #define REG_ADC12B_RNCR (0x400A8114U) /**< \brief (ADC12B) Receive Next Counter Register */ #define REG_ADC12B_PTCR (0x400A8120U) /**< \brief (ADC12B) Transfer Control Register */ #define REG_ADC12B_PTSR (0x400A8124U) /**< \brief (ADC12B) Transfer Status Register */ #else #define REG_ADC12B_CR (*(WoReg*)0x400A8000U) /**< \brief (ADC12B) Control Register */ #define REG_ADC12B_MR (*(RwReg*)0x400A8004U) /**< \brief (ADC12B) Mode Register */ #define REG_ADC12B_CHER (*(WoReg*)0x400A8010U) /**< \brief (ADC12B) Channel Enable Register */ #define REG_ADC12B_CHDR (*(WoReg*)0x400A8014U) /**< \brief (ADC12B) Channel Disable Register */ #define REG_ADC12B_CHSR (*(RoReg*)0x400A8018U) /**< \brief (ADC12B) Channel Status Register */ #define REG_ADC12B_SR (*(RoReg*)0x400A801CU) /**< \brief (ADC12B) Status Register */ #define REG_ADC12B_LCDR (*(RoReg*)0x400A8020U) /**< \brief (ADC12B) Last Converted Data Register */ #define REG_ADC12B_IER (*(WoReg*)0x400A8024U) /**< \brief (ADC12B) Interrupt Enable Register */ #define REG_ADC12B_IDR (*(WoReg*)0x400A8028U) /**< \brief (ADC12B) Interrupt Disable Register */ #define REG_ADC12B_IMR (*(RoReg*)0x400A802CU) /**< \brief (ADC12B) Interrupt Mask Register */ #define REG_ADC12B_CDR (*(RoReg*)0x400A8030U) /**< \brief (ADC12B) Channel Data Register */ #define REG_ADC12B_ACR (*(RwReg*)0x400A8064U) /**< \brief (ADC12B) Analog Control Register */ #define REG_ADC12B_EMR (*(RwReg*)0x400A8068U) /**< \brief (ADC12B) Extended Mode Register */ #define REG_ADC12B_RPR (*(RwReg*)0x400A8100U) /**< \brief (ADC12B) Receive Pointer Register */ #define REG_ADC12B_RCR (*(RwReg*)0x400A8104U) /**< \brief (ADC12B) Receive Counter Register */ #define REG_ADC12B_RNPR (*(RwReg*)0x400A8110U) /**< \brief (ADC12B) Receive Next Pointer Register */ #define REG_ADC12B_RNCR (*(RwReg*)0x400A8114U) /**< \brief (ADC12B) Receive Next Counter Register */ #define REG_ADC12B_PTCR (*(WoReg*)0x400A8120U) /**< \brief (ADC12B) Transfer Control Register */ #define REG_ADC12B_PTSR (*(RoReg*)0x400A8124U) /**< \brief (ADC12B) Transfer Status Register */ #endif /* (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ #endif /* _SAM3U_ADC12B_INSTANCE_ */