Repostiory containing DAPLink source code with Reset Pin workaround for HANI_IOT board.

Upstream: https://github.com/ARMmbed/DAPLink

source/hic_hal/atmel/sam3u2c/instance/adc.h

Committer:
Pawel Zarembski
Date:
2020-04-07
Revision:
0:01f31e923fe2

File content as of revision 0:01f31e923fe2:

/* ---------------------------------------------------------------------------- */
/*                  Atmel Microcontroller Software Support                      */
/*                       SAM Software Package License                           */
/* ---------------------------------------------------------------------------- */
/* Copyright (c) %copyright_year%, Atmel Corporation                                        */
/*                                                                              */
/* All rights reserved.                                                         */
/*                                                                              */
/* Redistribution and use in source and binary forms, with or without           */
/* modification, are permitted provided that the following condition is met:    */
/*                                                                              */
/* - Redistributions of source code must retain the above copyright notice,     */
/* this list of conditions and the disclaimer below.                            */
/*                                                                              */
/* Atmel's name may not be used to endorse or promote products derived from     */
/* this software without specific prior written permission.                     */
/*                                                                              */
/* DISCLAIMER:  THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR   */
/* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF */
/* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE   */
/* DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,      */
/* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT */
/* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,  */
/* OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF    */
/* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING         */
/* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, */
/* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.                           */
/* ---------------------------------------------------------------------------- */

#ifndef _SAM3U_ADC_INSTANCE_
#define _SAM3U_ADC_INSTANCE_

/* ========== Register definition for ADC peripheral ========== */
#if (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
#define REG_ADC_CR              (0x400AC000U) /**< \brief (ADC) Control Register */
#define REG_ADC_MR              (0x400AC004U) /**< \brief (ADC) Mode Register */
#define REG_ADC_CHER            (0x400AC010U) /**< \brief (ADC) Channel Enable Register */
#define REG_ADC_CHDR            (0x400AC014U) /**< \brief (ADC) Channel Disable Register */
#define REG_ADC_CHSR            (0x400AC018U) /**< \brief (ADC) Channel Status Register */
#define REG_ADC_SR              (0x400AC01CU) /**< \brief (ADC) Status Register */
#define REG_ADC_LCDR            (0x400AC020U) /**< \brief (ADC) Last Converted Data Register */
#define REG_ADC_IER             (0x400AC024U) /**< \brief (ADC) Interrupt Enable Register */
#define REG_ADC_IDR             (0x400AC028U) /**< \brief (ADC) Interrupt Disable Register */
#define REG_ADC_IMR             (0x400AC02CU) /**< \brief (ADC) Interrupt Mask Register */
#define REG_ADC_CDR             (0x400AC030U) /**< \brief (ADC) Channel Data Register */
#define REG_ADC_RPR             (0x400AC100U) /**< \brief (ADC) Receive Pointer Register */
#define REG_ADC_RCR             (0x400AC104U) /**< \brief (ADC) Receive Counter Register */
#define REG_ADC_RNPR            (0x400AC110U) /**< \brief (ADC) Receive Next Pointer Register */
#define REG_ADC_RNCR            (0x400AC114U) /**< \brief (ADC) Receive Next Counter Register */
#define REG_ADC_PTCR            (0x400AC120U) /**< \brief (ADC) Transfer Control Register */
#define REG_ADC_PTSR            (0x400AC124U) /**< \brief (ADC) Transfer Status Register */
#else
#define REG_ADC_CR     (*(WoReg*)0x400AC000U) /**< \brief (ADC) Control Register */
#define REG_ADC_MR     (*(RwReg*)0x400AC004U) /**< \brief (ADC) Mode Register */
#define REG_ADC_CHER   (*(WoReg*)0x400AC010U) /**< \brief (ADC) Channel Enable Register */
#define REG_ADC_CHDR   (*(WoReg*)0x400AC014U) /**< \brief (ADC) Channel Disable Register */
#define REG_ADC_CHSR   (*(RoReg*)0x400AC018U) /**< \brief (ADC) Channel Status Register */
#define REG_ADC_SR     (*(RoReg*)0x400AC01CU) /**< \brief (ADC) Status Register */
#define REG_ADC_LCDR   (*(RoReg*)0x400AC020U) /**< \brief (ADC) Last Converted Data Register */
#define REG_ADC_IER    (*(WoReg*)0x400AC024U) /**< \brief (ADC) Interrupt Enable Register */
#define REG_ADC_IDR    (*(WoReg*)0x400AC028U) /**< \brief (ADC) Interrupt Disable Register */
#define REG_ADC_IMR    (*(RoReg*)0x400AC02CU) /**< \brief (ADC) Interrupt Mask Register */
#define REG_ADC_CDR    (*(RoReg*)0x400AC030U) /**< \brief (ADC) Channel Data Register */
#define REG_ADC_RPR    (*(RwReg*)0x400AC100U) /**< \brief (ADC) Receive Pointer Register */
#define REG_ADC_RCR    (*(RwReg*)0x400AC104U) /**< \brief (ADC) Receive Counter Register */
#define REG_ADC_RNPR   (*(RwReg*)0x400AC110U) /**< \brief (ADC) Receive Next Pointer Register */
#define REG_ADC_RNCR   (*(RwReg*)0x400AC114U) /**< \brief (ADC) Receive Next Counter Register */
#define REG_ADC_PTCR   (*(WoReg*)0x400AC120U) /**< \brief (ADC) Transfer Control Register */
#define REG_ADC_PTSR   (*(RoReg*)0x400AC124U) /**< \brief (ADC) Transfer Status Register */
#endif /* (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */

#endif /* _SAM3U_ADC_INSTANCE_ */