Repostiory containing DAPLink source code with Reset Pin workaround for HANI_IOT board.

Upstream: https://github.com/ARMmbed/DAPLink

source/hic_hal/atmel/sam3u2c/component/wdt.h

Committer:
Pawel Zarembski
Date:
2020-04-07
Revision:
0:01f31e923fe2

File content as of revision 0:01f31e923fe2:

/* ---------------------------------------------------------------------------- */
/*                  Atmel Microcontroller Software Support                      */
/*                       SAM Software Package License                           */
/* ---------------------------------------------------------------------------- */
/* Copyright (c) %copyright_year%, Atmel Corporation                                        */
/*                                                                              */
/* All rights reserved.                                                         */
/*                                                                              */
/* Redistribution and use in source and binary forms, with or without           */
/* modification, are permitted provided that the following condition is met:    */
/*                                                                              */
/* - Redistributions of source code must retain the above copyright notice,     */
/* this list of conditions and the disclaimer below.                            */
/*                                                                              */
/* Atmel's name may not be used to endorse or promote products derived from     */
/* this software without specific prior written permission.                     */
/*                                                                              */
/* DISCLAIMER:  THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR   */
/* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF */
/* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE   */
/* DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,      */
/* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT */
/* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,  */
/* OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF    */
/* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING         */
/* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, */
/* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.                           */
/* ---------------------------------------------------------------------------- */

#ifndef _SAM3U_WDT_COMPONENT_
#define _SAM3U_WDT_COMPONENT_

/* ============================================================================= */
/**  SOFTWARE API DEFINITION FOR Watchdog Timer */
/* ============================================================================= */
/** \addtogroup SAM3U_WDT Watchdog Timer */
/*@{*/

#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
/** \brief Wdt hardware registers */
typedef struct {
  WoReg WDT_CR; /**< \brief (Wdt Offset: 0x00) Control Register */
  RwReg WDT_MR; /**< \brief (Wdt Offset: 0x04) Mode Register */
  RoReg WDT_SR; /**< \brief (Wdt Offset: 0x08) Status Register */
} Wdt;
#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
/* -------- WDT_CR : (WDT Offset: 0x00) Control Register -------- */
#define WDT_CR_WDRSTT (0x1u << 0) /**< \brief (WDT_CR) Watchdog Restart */
#define WDT_CR_KEY_Pos 24
#define WDT_CR_KEY_Msk (0xffu << WDT_CR_KEY_Pos) /**< \brief (WDT_CR) Password */
#define WDT_CR_KEY(value) ((WDT_CR_KEY_Msk & ((value) << WDT_CR_KEY_Pos)))
/* -------- WDT_MR : (WDT Offset: 0x04) Mode Register -------- */
#define WDT_MR_WDV_Pos 0
#define WDT_MR_WDV_Msk (0xfffu << WDT_MR_WDV_Pos) /**< \brief (WDT_MR) Watchdog Counter Value */
#define WDT_MR_WDV(value) ((WDT_MR_WDV_Msk & ((value) << WDT_MR_WDV_Pos)))
#define WDT_MR_WDFIEN (0x1u << 12) /**< \brief (WDT_MR) Watchdog Fault Interrupt Enable */
#define WDT_MR_WDRSTEN (0x1u << 13) /**< \brief (WDT_MR) Watchdog Reset Enable */
#define WDT_MR_WDRPROC (0x1u << 14) /**< \brief (WDT_MR) Watchdog Reset Processor */
#define WDT_MR_WDDIS (0x1u << 15) /**< \brief (WDT_MR) Watchdog Disable */
#define WDT_MR_WDD_Pos 16
#define WDT_MR_WDD_Msk (0xfffu << WDT_MR_WDD_Pos) /**< \brief (WDT_MR) Watchdog Delta Value */
#define WDT_MR_WDD(value) ((WDT_MR_WDD_Msk & ((value) << WDT_MR_WDD_Pos)))
#define WDT_MR_WDDBGHLT (0x1u << 28) /**< \brief (WDT_MR) Watchdog Debug Halt */
#define WDT_MR_WDIDLEHLT (0x1u << 29) /**< \brief (WDT_MR) Watchdog Idle Halt */
/* -------- WDT_SR : (WDT Offset: 0x08) Status Register -------- */
#define WDT_SR_WDUNF (0x1u << 0) /**< \brief (WDT_SR) Watchdog Underflow */
#define WDT_SR_WDERR (0x1u << 1) /**< \brief (WDT_SR) Watchdog Error */

/*@}*/


#endif /* _SAM3U_WDT_COMPONENT_ */