Repostiory containing DAPLink source code with Reset Pin workaround for HANI_IOT board.

Upstream: https://github.com/ARMmbed/DAPLink

source/family/st/stm32l443rc/flash_blob.c

Committer:
Pawel Zarembski
Date:
2020-04-07
Revision:
0:01f31e923fe2

File content as of revision 0:01f31e923fe2:

/* Flash OS Routines (Automagically Generated)
 * Copyright (c) 2009-2019 ARM Limited
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *     http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
 #include "flash_blob.h"

static const uint32_t _flash_prog_blob[] = {
    0xE00ABE00, 0x062D780D, 0x24084068, 0xD3000040, 0x1E644058, 0x1C49D1FA, 0x2A001E52, 0x4770D1F2,
    0x8f4ff3bf, 0x48584770, 0x49586800, 0x0d000500, 0xd0001840, 0x47702001, 0x6a004855, 0x0fc00280,
    0xb5004770, 0xf7ff4602, 0x2801ffee, 0xf7ffd108, 0x2801fff3, 0x484fd104, 0xd3014282, 0xbd002001,
    0xbd002000, 0x4602b500, 0xffddf7ff, 0xd0022801, 0x0d8002d0, 0x4948bd00, 0x40080ad0, 0xd5f90391,
    0x300130ff, 0x4842bd00, 0x60814944, 0x60814944, 0x60012100, 0x61014943, 0x03c06a00, 0x4843d406,
    0x60014941, 0x60412106, 0x60814941, 0x47702000, 0x49372001, 0x614807c0, 0x47702000, 0x47702001,
    0x49384833, 0x13c16101, 0x69416141, 0x04122201, 0x61414311, 0x4a354937, 0x6011e000, 0x03db6903,
    0x2100d4fb, 0x46086141, 0xb5104770, 0xf7ff4604, 0x4603ffa8, 0xf7ff4620, 0x4925ffb5, 0x610c4c29,
    0x02d800c2, 0x43021c92, 0x6948614a, 0x04122201, 0x61484310, 0x8f4ff3bf, 0x4a244826, 0x6010e000,
    0x03db690b, 0x2000d4fb, 0x69086148, 0xd0014020, 0x2001610c, 0xb5f0bd10, 0x4d151dc9, 0x4f1908c9,
    0x612f00c9, 0x616b2300, 0xe0184c1a, 0x616b2301, 0x60036813, 0x60436853, 0x8f4ff3bf, 0xe0004b13,
    0x692e601c, 0xd4fb03f6, 0x616b2300, 0x423b692b, 0x612fd002, 0xbdf02001, 0x39083008, 0x29003208,
    0x2000d1e4, 0x0000bdf0, 0xe0042000, 0xfffffbcb, 0x40022000, 0x08020000, 0x000003bf, 0x45670123,
    0xcdef89ab, 0x0000c3fa, 0x00005555, 0x40003000, 0x00000fff, 0x0000aaaa, 0x00000000
};

// Start address of flash
static const uint32_t flash_start = 0x08000000;
// Size of flash
static const uint32_t flash_size = 0x00040000;

/**
* List of start and size for each size of flash sector
* The size will apply to all sectors between the listed address and the next address
* in the list.
* The last pair in the list will have sectors starting at that address and ending
* at address start + size.
*/
static const sector_info_t sectors_info[] = {
    {0x08000000, 0x00000800},
};

static const program_target_t flash = {
    0x20000087, // Init
    0x200000b1, // UnInit
    0x200000c1, // EraseChip
    0x200000eb, // EraseSector
    0x20000137, // ProgramPage
    0x0,        // Verify
    
    // BKPT : start of blob + 1
    // RSB  : blob start + header + rw data offset
    // RSP  : stack pointer
    {
        0x20000001,
        0x200001b8,
        0x20000800
    },

    0x20000000 + 0x00000A00,  // mem buffer location
    0x20000000,               // location to write prog_blob in target RAM
    sizeof(_flash_prog_blob),   // prog_blob size
    _flash_prog_blob,           // address of prog_blob
    0x00000400       // ram_to_flash_bytes_to_be_written
};