Repostiory containing DAPLink source code with Reset Pin workaround for HANI_IOT board.

Upstream: https://github.com/ARMmbed/DAPLink

source/family/st/stm32f103rb/flash_blob.c

Committer:
Pawel Zarembski
Date:
2020-04-07
Revision:
0:01f31e923fe2

File content as of revision 0:01f31e923fe2:

/* Flash OS Routines (Automagically Generated)
 * Copyright (c) 2009-2019 ARM Limited
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *     http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

static const uint32_t STM32F103RB_flash_prog_blob[] = {
    0xE00ABE00, 0x062D780D, 0x24084068, 0xD3000040, 0x1E644058, 0x1C49D1FA, 0x2A001E52, 0x4770D1F2,
    0x4603b510, 0x4c442000, 0x48446020, 0x48446060, 0x46206060, 0xf01069c0, 0xd1080f04, 0x5055f245,
    0x60204c40, 0x60602006, 0x70fff640, 0x200060a0, 0x4601bd10, 0x69004838, 0x0080f040, 0x61104a36,
    0x47702000, 0x69004834, 0x0004f040, 0x61084932, 0x69004608, 0x0040f040, 0xe0036108, 0x20aaf64a,
    0x60084930, 0x68c0482c, 0x0f01f010, 0x482ad1f6, 0xf0206900, 0x49280004, 0x20006108, 0x46014770,
    0x69004825, 0x0002f040, 0x61104a23, 0x61414610, 0xf0406900, 0x61100040, 0xf64ae003, 0x4a2120aa,
    0x481d6010, 0xf01068c0, 0xd1f60f01, 0x6900481a, 0x0002f020, 0x61104a18, 0x47702000, 0x4603b510,
    0xf0201c48, 0xe0220101, 0x69004813, 0x0001f040, 0x61204c11, 0x80188810, 0x480fbf00, 0xf01068c0,
    0xd1fa0f01, 0x6900480c, 0x0001f020, 0x61204c0a, 0x68c04620, 0x0f14f010, 0x4620d006, 0xf04068c0,
    0x60e00014, 0xbd102001, 0x1c921c9b, 0x29001e89, 0x2000d1da, 0x0000e7f7, 0x40022000, 0x45670123,
    0xcdef89ab, 0x40003000, 0x00000000
};

/**
* List of start and size for each size of flash sector
* The size will apply to all sectors between the listed address and the next address
* in the list.
* The last pair in the list will have sectors starting at that address and ending
* at address start + size.
*/
static const sector_info_t sectors_info[] = {
    {0x08000000, 0x400},
};

static const program_target_t flash = {
    0x20000021, // Init
    0x20000053, // UnInit
    0x20000065, // EraseChip
    0x2000009f, // EraseSector
    0x200000dd, // ProgramPage
    0x0,        // Verify

    // BKPT : start of blob + 1
    // RSB  : blob start + header + rw data offset
    // RSP  : stack pointer
    {
        0x20000001,
        0x20000148,
        0x20000800
    },

    0x20000000 + 0x00000A00,  // mem buffer location
    0x20000000,               // location to write prog_blob in target RAM
    sizeof(STM32F103RB_flash_prog_blob),   // prog_blob size
    STM32F103RB_flash_prog_blob,           // address of prog_blob
    0x00000400       // ram_to_flash_bytes_to_be_written
};