File content as of revision 0:01f31e923fe2:

/**
 * @file    flash_blob.c
 * @brief   Flash algorithm for the lpc824
 *
 * DAPLink Interface Firmware
 * Copyright (c) 2009-2019, ARM Limited, All Rights Reserved
 * SPDX-License-Identifier: Apache-2.0
 *
 * Licensed under the Apache License, Version 2.0 (the "License"); you may
 * not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
 * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

#include "flash_blob.h"

static const uint32_t LPC824_FLM[] = {
    0xE00ABE00, 0x062D780D, 0x24084068, 0xD3000040, 0x1E644058, 0x1C49D1FA, 0x2A001E52, 0x4770D1F2,

    /*0x020*/ 0x47700a80, 0x21004841, 0x22016301, 0x63416342, 0x6b416342, 0xd0fc07c9L, 0x493c6382, 0x39402002,
    /*0x040*/ 0x20006008, 0x20004770, 0xb5f84770L, 0x20324c38, 0x2500444c, 0x4622261f, 0x4621c261, 0x4f353114,
    /*0x060*/ 0x91004620L, 0x696047b8, 0xd10a2800L, 0x46212034, 0x4831c161, 0x462060e0, 0x47b89900, 0x28006960,
    /*0x080*/ 0x2001d000, 0xb5f8bdf8L, 0xa844d29, 0x2032444d, 0x4629606c, 0x311460ac, 0x4e266028, 0x4628460f,
    /*0x0A0*/ 0x696847b0, 0xd10b2800L, 0x2034606c, 0x602860ac, 0x60e84821, 0x46284639, 0x696847b0, 0xd0002800L,
    /*0x0C0*/ 0xbdf82001L, 0x4614b5f8, 0xd10e0006L, 0x68206861, 0x184068e2, 0x188968a1, 0x69211840, 0x69611840,
    /*0x0E0*/ 0x69a11840, 0x42401840, 0x4d1161e0, 0x444d0ab0, 0x60682132, 0x60a86029, 0x31144629, 0x46284f0d,
    /*0x100*/ 0x47b89100, 0x28006968, 0x606ed10e, 0x60ac2033, 0x20016028, 0x60e80240, 0x61284807, 0x99004628L,
    /*0x120*/ 0x696847b8, 0xd0002800L, 0xbdf82001L, 0x40048040, 0x4, 0x1fff1ff1, 0x2ee0, 0x0,
    /*0x140*/
};

/**
* List of start and size for each size of flash sector
* The size will apply to all sectors between the listed address and the next address
* in the list.
* The last pair in the list will have sectors starting at that address and ending
* at address start + size.
*/
static const sector_info_t sectors_info[] = {
    {0, 1024},
};

static const program_target_t flash = {
    0x10000025, // Init
    0x10000047, // UnInit
    0x1000004B, // EraseChip
    0x10000087, // EraseSector
    0x100000C5, // ProgramPage
    0x0,        // Verify
    
    // static_base : base address is address of Execution Region PrgData in map file
    //               to access global/static data
    // stack_pointer : Initial stack pointer
    {0x10000001, 0x10000200, 0x10001000}, // {breakpoint, static_base, stack_pointer}

    0x10000400, // program_buffer
    0x10000000, // algo_start
    0x00000140, // algo_size

    /*
        0x10000000   ----------------------  algo_start
                     | FLASH ALGORITHM    |
        0x10000001   |                    |  breakpoint
        0x10000025   |                    |  Init
        0x10000047   |                    |  UnInit
        0x1000004b   |                    |  EraseChip
        0x10000087   |                    |  EraseSector
        0x100000c5   |                    |  ProgramPage
                     |                    |
                     ----------------------  algo_start + algo_size
                     |      unused        |
        0x10000200   ----------------------  static_base
                     | GLOBAL/STATIC DATA |
                     |                    |
        0x10000400   ----------------------  program_buffer
                     | DATA TO BE WRITTEN |
                     |                    |
                     ----------------------  program_buffer + ram_to_flash_bytes_to_be_written
                     |      unused        |
                     ----------------------
                     | SPACE FOR STACK    |
        0x10001000   ----------------------  stack_pointer
                     |      unused        |
                     ----------------------
                     | 32 BYTES FOR IAP   |
        0x10??????   ----------------------  CHIP MEMORY LIMIT
    */

    LPC824_FLM, // image

    512         // ram_to_flash_bytes_to_be_written
};