File content as of revision 0:01f31e923fe2:

/**
 * @file    flash_manager.c
 * @brief   Implementation of flash_manager.h
 *
 * DAPLink Interface Firmware
 * Copyright (c) 2009-2019, ARM Limited, All Rights Reserved
 * Copyright 2019, Cypress Semiconductor Corporation 
 * or a subsidiary of Cypress Semiconductor Corporation.
 * SPDX-License-Identifier: Apache-2.0
 *
 * Licensed under the Apache License, Version 2.0 (the "License"); you may
 * not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
 * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

#include "flash_manager.h"
#include "util.h"
#include "error.h"
#include "settings.h"

// Set to 1 to enable debugging
#define DEBUG_FLASH_MANAGER     0

#if DEBUG_FLASH_MANAGER
#include "daplink_debug.h"
#define flash_manager_printf    debug_msg
#else
#define flash_manager_printf(...)
#endif

typedef enum {
    STATE_CLOSED,
    STATE_OPEN,
    STATE_ERROR
} state_t;

// Target programming expects buffer
// passed in to be 4 byte aligned
__attribute__((aligned(4)))
static uint8_t buf[1024];
static bool buf_empty;
static bool current_sector_valid;
static bool page_erase_enabled = false;
static uint32_t current_write_block_addr;
static uint32_t current_write_block_size;
static uint32_t current_sector_addr;
static uint32_t current_sector_size;
static uint32_t last_addr;
static const flash_intf_t *intf;
static state_t state = STATE_CLOSED;

static bool flash_intf_valid(const flash_intf_t *flash_intf);
static error_t flush_current_block(uint32_t addr);
static error_t setup_next_sector(uint32_t addr);

error_t flash_manager_init(const flash_intf_t *flash_intf)
{
    error_t status;
    // Assert that interface has been properly uninitialized
    flash_manager_printf("flash_manager_init()\r\n");

    if (state != STATE_CLOSED) {
        util_assert(0);
        return ERROR_INTERNAL;
    }

    // Check for a valid flash interface
    if (!flash_intf_valid(flash_intf)) {
        util_assert(0);
        return ERROR_INTERNAL;
    }

    // Initialize variables
    memset(buf, 0xFF, sizeof(buf));
    buf_empty = true;
    current_sector_valid = false;
    current_write_block_addr = 0;
    current_write_block_size = 0;
    current_sector_addr = 0;
    current_sector_size = 0;
    last_addr = 0;
    intf = flash_intf;
    // Initialize flash
    status = intf->init();
    flash_manager_printf("    intf->init ret=%i\r\n", status);

    if (ERROR_SUCCESS != status) {
        return status;
    }

    if (!page_erase_enabled) {
        // Erase flash and unint if there are errors
        status = intf->erase_chip();
        flash_manager_printf("    intf->erase_chip ret=%i\r\n", status);

        if (ERROR_SUCCESS != status) {
            intf->uninit();
            return status;
        }
    }

    state = STATE_OPEN;
    return status;
}

error_t flash_manager_data(uint32_t addr, const uint8_t *data, uint32_t size)
{
    uint32_t size_left;
    uint32_t copy_size;
    uint32_t pos;
    error_t status = ERROR_SUCCESS;
    flash_manager_printf("flash_manager_data(addr=0x%x size=0x%x)\r\n", addr, size);

    if (state != STATE_OPEN) {
        util_assert(0);
        return ERROR_INTERNAL;
    }

    // Setup the current sector if it is not setup already
    if (!current_sector_valid) {
        status = setup_next_sector(addr);

        if (ERROR_SUCCESS != status) {
            state = STATE_ERROR;
            return status;
        }
        current_sector_valid = true;
        last_addr = addr;
    }

    //non-increasing address support
    if (ROUND_DOWN(addr, current_write_block_size) != ROUND_DOWN(last_addr, current_write_block_size)) {
        status = flush_current_block(addr);
        if (ERROR_SUCCESS != status) {
            state = STATE_ERROR;
            return status;
        }
    }

    if (ROUND_DOWN(addr, current_sector_size) != ROUND_DOWN(last_addr, current_sector_size)) {
        status = setup_next_sector(addr);
        if (ERROR_SUCCESS != status) {
            state = STATE_ERROR;
            return status;
        }
    }

    while (true) {
        // flush if necessary
        if (addr >= current_write_block_addr + current_write_block_size) {
            status = flush_current_block(addr);
            if (ERROR_SUCCESS != status) {
                state = STATE_ERROR;
                return status;
            }
        }

        // Check for end
        if (size <= 0) {
            break;
        }

        // Change sector if necessary
        if (addr >= current_sector_addr + current_sector_size) {
            status = setup_next_sector(addr);

            if (ERROR_SUCCESS != status) {
                state = STATE_ERROR;
                return status;
            }
        }

        // write buffer
        pos = addr - current_write_block_addr;
        size_left = current_write_block_size - pos;
        copy_size = MIN(size, size_left);
        memcpy(buf + pos, data, copy_size);
        buf_empty = copy_size == 0;
        // Update variables
        addr += copy_size;
        data += copy_size;
        size -= copy_size;
    }

    last_addr = addr;
    return status;
}

error_t flash_manager_uninit(void)
{
    error_t flash_uninit_error;
    error_t flash_write_error = ERROR_SUCCESS;
    flash_manager_printf("flash_manager_uninit()\r\n");

    if (STATE_CLOSED == state) {
        util_assert(0);
        return ERROR_INTERNAL;
    }

    // Flush last buffer if its not empty
    if (STATE_OPEN == state) {
        flash_write_error = flush_current_block(0);
        flash_manager_printf("    last flush_current_block ret=%i\r\n",flash_write_error);
    }
    // Close flash interface (even if there was an error during program_page)
    flash_uninit_error = intf->uninit();
    flash_manager_printf("    intf->uninit() ret=%i\r\n", flash_uninit_error);
    // Reset variables to catch accidental use
    memset(buf, 0xFF, sizeof(buf));
    buf_empty = true;
    current_sector_valid = false;
    current_write_block_addr = 0;
    current_write_block_size = 0;
    current_sector_addr = 0;
    current_sector_size = 0;
    last_addr = 0;
    state = STATE_CLOSED;

    // Make sure an error from a page write or from an
    // uninit gets propagated
    if (flash_uninit_error != ERROR_SUCCESS) {
        return flash_uninit_error;
    }

    if (flash_write_error != ERROR_SUCCESS) {
        return flash_write_error;
    }

    return ERROR_SUCCESS;
}

void flash_manager_set_page_erase(bool enabled)
{
    config_ram_set_page_erase(enabled);
    page_erase_enabled = enabled;
}

static bool flash_intf_valid(const flash_intf_t *flash_intf)
{
    // Check for all requried members
    if (0 == flash_intf) {
        return false;
    }

    if (0 == flash_intf->uninit) {
        return false;
    }

    if (0 == flash_intf->program_page) {
        return false;
    }

    if (0 == flash_intf->erase_sector) {
        return false;
    }

    if (0 == flash_intf->erase_chip) {
        return false;
    }

    if (0 == flash_intf->program_page_min_size) {
        return false;
    }

    if (0 == flash_intf->erase_sector_size) {
        return false;
    }

    if (0 == flash_intf->flash_busy) {
        return false;
    }

    return true;
}

static error_t flush_current_block(uint32_t addr){
    // Write out current buffer if there is data in it
    error_t status = ERROR_SUCCESS;
    if (!buf_empty) {
        status = intf->program_page(current_write_block_addr, buf, current_write_block_size);
        flash_manager_printf("    intf->program_page(addr=0x%x, size=0x%x) ret=%i\r\n", current_write_block_addr, current_write_block_size, status);
        buf_empty = true;
    }

    // Setup for next block
    memset(buf, 0xFF, current_write_block_size);
    current_write_block_addr = ROUND_DOWN(addr,current_write_block_size);
    return status;
}

static error_t setup_next_sector(uint32_t addr)
{
    uint32_t min_prog_size;
    uint32_t sector_size;
    error_t status;
    min_prog_size = intf->program_page_min_size(addr);
    sector_size = intf->erase_sector_size(addr);

    if ((min_prog_size <= 0) || (sector_size <= 0)) {
        // Either of these conditions could cause divide by 0 error
        util_assert(0);
        return ERROR_INTERNAL;
    }

    // Assert required size and alignment
    util_assert(sizeof(buf) >= min_prog_size);
    util_assert(sizeof(buf) % min_prog_size == 0);
    util_assert(sector_size >= min_prog_size);
    util_assert(sector_size % min_prog_size == 0);
    // Setup global variables
    current_sector_addr = ROUND_DOWN(addr, sector_size);
    current_sector_size = sector_size;
    current_write_block_addr = current_sector_addr;
    current_write_block_size = MIN(sector_size, sizeof(buf));

    //check flash algo every sector change, addresses with different flash algo should be sector aligned
    if (intf->flash_algo_set) {
        status = intf->flash_algo_set(current_sector_addr);
        if (ERROR_SUCCESS != status) {
            intf->uninit();
            return status;
        }
    }

    if (page_erase_enabled) {
        // Erase the current sector
        status = intf->erase_sector(current_sector_addr);
        flash_manager_printf("    intf->erase_sector(addr=0x%x) ret=%i\r\n", current_sector_addr);
        if (ERROR_SUCCESS != status) {
            intf->uninit();
            return status;
        }
    }

    // Clear out buffer in case block size changed
    memset(buf, 0xFF, current_write_block_size);
    flash_manager_printf("    setup_next_sector(addr=0x%x) sect_addr=0x%x, write_addr=0x%x,\r\n",
                         addr, current_sector_addr, current_write_block_addr);
    flash_manager_printf("        actual_write_size=0x%x, sector_size=0x%x, min_write=0x%x\r\n",
                         current_write_block_size, current_sector_size, min_prog_size);
    return ERROR_SUCCESS;
}