Arrow
Repostiory containing DAPLink source code with Reset Pin workaround for HANI_IOT board.
Upstream: https://github.com/ARMmbed/DAPLink
docs/ENABLE_AUTOMATION.md
- Committer:
- Pawel Zarembski
- Date:
- 2020-04-07
- Revision:
- 0:01f31e923fe2
File content as of revision 0:01f31e923fe2:
# Enable Automation Features
1. Update the interface software to a version at or above 0241
1. Copy an empty text file called ``auto_on.cfg`` to the DAPLink MSD drive while the reset button is held.
1. Release the reset button when the drive unmounts. When it remounts, confirm "Automation Allowed" is set to 1 in ``details.txt``
1. Update the bootloader software to a version at or above 0241
1. Confirm that the ``start_bl.act`` MSD command causes the device to enter bootloader mode, and that the ``start_if.act`` command causes the device to enter interface mode. See [MSD Commands](MSD_COMMANDS.md)