Repostiory containing DAPLink source code with Reset Pin workaround for HANI_IOT board.
Upstream: https://github.com/ARMmbed/DAPLink
Diff: source/hic_hal/maxim/max32625/usb_config.c
- Revision:
- 0:01f31e923fe2
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/source/hic_hal/maxim/max32625/usb_config.c Tue Apr 07 12:55:42 2020 +0200 @@ -0,0 +1,558 @@ +/* CMSIS-DAP Interface Firmware + * Copyright (c) 2009-2019 ARM Limited + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#include "util.h" + +/*------------------------------------------------------------------------------ + * USB Device Configuration + *----------------------------------------------------------------------------*/ + +// <e> USB Device +// <i> Enable the USB Device functionality +#define USBD_ENABLE 1 +#define USBD_RTX_CORE_STACK 0 +#define USBD_RTX_DEVICE_STACK 0 +#define USBD_RTX_ENDPOINT0_STACK 0 + +// <o0.0> High-speed +// <i> Enable high-speed functionality (if device supports it) +#define USBD_HS_ENABLE 0 +#if (defined(WEBUSB_INTERFACE) || defined(WINUSB_INTERFACE) || defined(BULK_ENDPOINT)) +#define USBD_BOS_ENABLE 1 +#else +#define USBD_BOS_ENABLE 0 +#endif +// <h> Device Settings +// <i> These settings affect Device Descriptor +// <o0> Power +// <i> Default Power Setting +// <0=> Bus-powered +// <1=> Self-powered +// <o1> Max Endpoint 0 Packet Size +// <i> Maximum packet size for endpoint zero (bMaxPacketSize0) +// <8=> 8 Bytes <16=> 16 Bytes <32=> 32 Bytes <64=> 64 Bytes +// <o2.0..15> Vendor ID <0x0000-0xFFFF> +// <i> Vendor ID assigned by the USB-IF (idVendor) +// <o3.0..15> Product ID <0x0000-0xFFFF> +// <i> Product ID assigned by the manufacturer (idProduct) +// <o4.0..15> Device Release Number <0x0000-0xFFFF> +// <i> Device release number in binary-coded decimal (bcdDevice) +// </h> +#define USBD_POWER 0 +#define USBD_MAX_PACKET0 64 +#define USBD_DEVDESC_IDVENDOR 0x0D28 +#define USBD_DEVDESC_IDPRODUCT 0x0204 +#define USBD_DEVDESC_BCDDEVICE 0x1000 //was 0x0100 + +// <h> Configuration Settings +// <i> These settings affect Configuration Descriptor +// <o0.5> Remote Wakeup +// <i> Configuration support for remote wakeup (D5: of bmAttributes) +// <o1.0..7> Maximum Power Consumption (in mA) <0-510><#/2> +// <i> Maximum power consumption of the USB device +// <i> from the bus in this specific configuration +// <i> when the device is fully operational (bMaxPower) +// </h> +#define USBD_CFGDESC_BMATTRIBUTES 0x80 +#define USBD_CFGDESC_BMAXPOWER 0xFA + +// <h> String Settings +// <i> These settings affect String Descriptor +// <o0.0..15> Language ID <0x0000-0xFCFF> +// <i> English (United States) = 0x0409 +// <s0.126> Manufacturer String +// <i> String descriptor describing manufacturer +// <s1.126> Product String +// <i> String descriptor describing product +// <e1.0> Serial Number +// <i> Enable serial number string +// <i> If disabled serial number string will not be assigned to the USB Device +// <s2.126> Serial Number String +// <i> String descriptor describing device's serial number +// </e> +// </h> +#define USBD_STRDESC_LANGID 0x0409 +#define USBD_STRDESC_MAN L"ARM" +#ifndef USB_PROD_STR +#define USBD_STRDESC_PROD L"DAPLink CMSIS-DAP" +#else +#define _TOWIDE(x) L ## #x +#define TOWIDE(x) _TOWIDE(x) +#define USBD_STRDESC_PROD TOWIDE(USB_PROD_STR) +#endif +#define USBD_STRDESC_SER_ENABLE 1 +#define USBD_STRDESC_SER L"0001A0000000" + +// <e0> Class Support +// <i> Enables USB Device Class specific Requests +#define USBD_CLASS_ENABLE 1 + +// <e0.0> Human Interface Device (HID) +// <i> Enable class support for Human Interface Device (HID) +// <h> Interrupt Endpoint Settings +// <o1.0..4> Interrupt In Endpoint Number <1=> 1 <2=> 2 <3=> 3 +// <4=> 4 <5=> 5 <6=> 6 <7=> 7 +// <8=> 8 <9=> 9 <10=> 10 <11=> 11 +// <12=> 12 <13=> 13 <14=> 14 <15=> 15 +// <o2.0..4> Interrupt Out Endpoint Number <0=> Not used <1=> 1 <2=> 2 <3=> 3 +// <4=> 4 <5=> 5 <6=> 6 <7=> 7 +// <8=> 8 <9=> 9 <10=> 10 <11=> 11 +// <12=> 12 <13=> 13 <14=> 14 <15=> 15 +// <i> If interrupt out endpoint is not used select "Not used" +// <h> Endpoint Settings +// <o3.0..7> Maximum Endpoint Packet Size (in bytes) <0-64> +// <o4.0..7> Endpoint polling Interval (in ms) <1-255> +// <e5> High-speed +// <i> If high-speed is enabled set endpoint settings for it +// <o6.0..10> Maximum Endpoint Packet Size (in bytes) <0-1024> +// <o6.11..12> Additional transactions per microframe <0=> None <1=> 1 additional <2=> 2 additional +// <o7.0..7> Endpoint polling Interval (in ms) <1=> 1 <2=> 2 <3=> 4 <4=> 8 +// <5=> 16 <6=> 32 <7=> 64 <8=> 128 +// <9=> 256 <10=> 512 <11=> 1024 <12=> 2048 +// <13=> 4096 <14=> 8192 <15=> 16384 <16=> 32768 +// </e> +// </h> +// </h> +// <h> Human Interface Device Settings +// <i> Device specific settings +// <s0.126> HID Interface String +// <o8.0..4> Number of Input Reports <1-32> +// <o9.0..4> Number of Output Reports <1-32> +// <o10.0..15> Maximum Input Report Size (in bytes) <1-65535> +// <o11.0..15> Maximum Output Report Size (in bytes) <1-65535> +// <o12.0..15> Maximum Feature Report Size (in bytes) <1-65535> +// </h> +// </e> +#ifndef HID_ENDPOINT +#define HID_ENDPOINT 0 +#else +#define HID_ENDPOINT 1 +#endif + +#ifndef WEBUSB_INTERFACE +#define WEBUSB_INTERFACE 0 +#else +#define WEBUSB_INTERFACE 1 +#endif + +#define USBD_HID_ENABLE HID_ENDPOINT +#ifndef BULK_ENDPOINT //check if bulk endpoint is not enabled +#define USBD_HID_EP_INTIN 1 +#define USBD_HID_EP_INTOUT 2 +#else //if bulk endpoint is enabled remove interrupt endpoints from the hid +#define USBD_HID_EP_INTIN 0 +#define USBD_HID_EP_INTOUT 0 +#endif +#define USBD_HID_EP_INTIN_STACK 0 +#define USBD_HID_WMAXPACKETSIZE 64 +#define USBD_HID_BINTERVAL 1 +#define USBD_HID_HS_ENABLE 0 +#define USBD_HID_HS_WMAXPACKETSIZE 64 +#define USBD_HID_HS_BINTERVAL 6 +#define USBD_HID_STRDESC L"CMSIS-DAP v1" +#define USBD_WEBUSB_STRDESC L"WebUSB: CMSIS-DAP" +#define USBD_HID_INREPORT_NUM 1 +#define USBD_HID_OUTREPORT_NUM 1 +#define USBD_HID_INREPORT_MAX_SZ 64 +#define USBD_HID_OUTREPORT_MAX_SZ 64 +#define USBD_HID_FEATREPORT_MAX_SZ 1 + +// <e0.0> Mass Storage Device (MSC) +// <i> Enable class support for Mass Storage Device (MSC) +// <h> Bulk Endpoint Settings +// <o1.0..4> Bulk In Endpoint Number <1=> 1 <2=> 2 <3=> 3 +// <4=> 4 <5=> 5 <6=> 6 <7=> 7 +// <8=> 8 <9=> 9 <10=> 10 <11=> 11 +// <12=> 12 <13=> 13 <14=> 14 <15=> 15 +// <o2.0..4> Bulk Out Endpoint Number <1=> 1 <2=> 2 <3=> 3 +// <4=> 4 <5=> 5 <6=> 6 <7=> 7 +// <8=> 8 <9=> 9 <10=> 10 <11=> 11 +// <12=> 12 <13=> 13 <14=> 14 <15=> 15 +// <h> Endpoint Settings +// <o3> Maximum Packet Size <1-1024> +// <e4> High-speed +// <i> If high-speed is enabled set endpoint settings for it +// <o5> Maximum Packet Size <1-1024> +// <o6> Maximum NAK Rate <0-255> +// </e> +// </h> +// </h> +// <h> Mass Storage Device Settings +// <i> Device specific settings +// <s0.126> MSC Interface String +// <h> Inquiry Data +// <s1.8> Vendor Identification +// <s2.16> Product Identification +// <s3.4> Product Revision Level +// </h> +// </h> +// </e> +#ifndef MSC_ENDPOINT +#define MSC_ENDPOINT 0 +#else +#define MSC_ENDPOINT 1 +#endif +#define USBD_MSC_ENABLE MSC_ENDPOINT +#define USBD_MSC_EP_BULKIN 3 +#define USBD_MSC_EP_BULKOUT 4 +#define USBD_MSC_EP_BULKIN_STACK 0 +#define USBD_MSC_WMAXPACKETSIZE 64 +#define USBD_MSC_HS_ENABLE 0 +#define USBD_MSC_HS_WMAXPACKETSIZE 512 +#define USBD_MSC_HS_BINTERVAL 0 +#define USBD_MSC_STRDESC L"USB_MSC" +#define USBD_MSC_INQUIRY_DATA "MBED " \ + "VFS " \ + "0.1" + +// <e0.0> Audio Device (ADC) +// <i> Enable class support for Audio Device (ADC) +// <h> Isochronous Endpoint Settings +// <o1.0..4> Isochronous Out Endpoint Number <1=> 1 <2=> 2 <3=> 3 +// <4=> 4 <5=> 5 <6=> 6 <7=> 7 +// <8=> 8 <9=> 9 <10=> 10 <11=> 11 +// <12=> 12 <13=> 13 <14=> 14 <15=> 15 +// <h> Endpoint Settings +// <o2.0..10> Maximum Endpoint Packet Size (in bytes) <0-1024> +// <o3.0..10> Endpoint polling Interval (in ms) <1=> 1 <2=> 2 <3=> 4 <4=> 8 +// <5=> 16 <6=> 32 <7=> 64 <8=> 128 +// <9=> 256 <10=> 512 <11=> 1024 <12=> 2048 +// <13=> 4096 <14=> 8192 <15=> 16384 <16=> 32768 +// <e4> High-speed +// <i> If high-speed is enabled set endpoint settings for it +// <o5.0..10> Maximum Endpoint Packet Size (in bytes) <0-1024> +// <o5.11..12> Additional transactions per microframe <0=> None <1=> 1 additional <2=> 2 additional +// </e> +// </h> +// </h> +// <h> Audio Device Settings +// <i> Device specific settings +// <s0.126> Audio Control Interface String +// <s1.126> Audio Streaming (Zero Bandwidth) Interface String +// <s2.126> Audio Streaming (Operational) Interface String +// <o6.0..7> Audio Subframe Size (in bytes) <0-255> +// <o7.0..7> Sample Resolution (in bits) <0-255> +// <o8.0..23> Sample Frequency (in Hz) <0-16777215> +// <o9> Packet Size (in bytes) <1-256> +// <o10> Packet Count <1-16> +// </h> +// </e> +#define USBD_ADC_ENABLE 0 +#define USBD_ADC_EP_ISOOUT 3 +#define USBD_ADC_WMAXPACKETSIZE 64 +#define USBD_ADC_BINTERVAL 1 +#define USBD_ADC_HS_ENABLE 0 +#define USBD_ADC_HS_WMAXPACKETSIZE 64 +#define USBD_ADC_CIF_STRDESC L"USB_ADC" +#define USBD_ADC_SIF1_STRDESC L"USB_ADC1" +#define USBD_ADC_SIF2_STRDESC L"USB_ADC2" +#define USBD_ADC_BSUBFRAMESIZE 2 +#define USBD_ADC_BBITRESOLUTION 16 +#define USBD_ADC_TSAMFREQ 32000 +#define USBD_ADC_CFG_P_S 32 +#define USBD_ADC_CFG_P_C 1 + +// <e0> Communication Device (CDC) - Abstract Control Model (ACM) +// <i> Enable class support for Communication Device (CDC) - Abstract Control Model (ACM) +// <h> Interrupt Endpoint Settings +// <o1.0..4> Interrupt In Endpoint Number <1=> 1 <2=> 2 <3=> 3 +// <4=> 4 <5=> 5 <6=> 6 <7=> 7 +// <8=> 8 <9=> 9 <10=> 10 <11=> 11 +// <12=> 12 <13=> 13 <14=> 14 <15=> 15 +// <h> Endpoint Settings +// <o2.0..10> Maximum Endpoint Packet Size (in bytes) <0-1024> +// <o3.0..10> Endpoint polling Interval (in ms) <0-255> +// <e4> High-speed +// <i> If high-speed is enabled set endpoint settings for it +// <o5.0..10> Maximum Endpoint Packet Size (in bytes) <0-1024> +// <o5.11..12> Additional transactions per microframe <0=> None <1=> 1 additional <2=> 2 additional +// <o6.0..10> Endpoint polling Interval (in ms) <1=> 1 <2=> 2 <3=> 4 <4=> 8 +// <5=> 16 <6=> 32 <7=> 64 <8=> 128 +// <9=> 256 <10=> 512 <11=> 1024 <12=> 2048 +// <13=> 4096 <14=> 8192 <15=> 16384 <16=> 32768 +// </e4> +// </h> +// </h> +// <h> Bulk Endpoint Settings +// <o7.0..4> Bulk In Endpoint Number <1=> 1 <2=> 2 <3=> 3 +// <4=> 4 <5=> 5 <6=> 6 <7=> 7 +// <8=> 8 <9=> 9 <10=> 10 <11=> 11 +// <12=> 12 <13=> 13 <14=> 14 <15=> 15 +// <o8.0..4> Bulk Out Endpoint Number <1=> 1 <2=> 2 <3=> 3 +// <4=> 4 <5=> 5 <6=> 6 <7=> 7 +// <8=> 8 <9=> 9 <10=> 10 <11=> 11 +// <12=> 12 <13=> 13 <14=> 14 <15=> 15 +// <h> Endpoint Settings +// <o9> Maximum Packet Size <1-1024> +// <e10> High-speed +// <i> If high-speed is enabled set endpoint settings for it +// <o11> Maximum Packet Size <1-1024> +// <o12> Maximum NAK Rate <0-255> +// </e10> +// </h> +// </h> +// <h> Communication Device Settings +// <i> Device specific settings +// <s0.126> Communication Class Interface String +// <s1.126> Data Class Interface String +// <o13> Maximum Communication Device Send Buffer Size +// <8=> 8 Bytes <16=> 16 Bytes <32=> 32 Bytes <64=> 64 Bytes <128=> 128 Bytes +// <256=> 256 Bytes <512=> 512 Bytes <1024=> 1024 Bytes +// <o14> Maximum Communication Device Receive Buffer Size +// <i> Minimum size must be as big as maximum packet size for Bulk Out Endpoint +// <8=> 8 Bytes <16=> 16 Bytes <32=> 32 Bytes <64=> 64 Bytes <128=> 128 Bytes +// <256=> 256 Bytes <512=> 512 Bytes <1024=> 1024 Bytes +// </h> +// </e> +#ifndef CDC_ENDPOINT +#define CDC_ENDPOINT 0 +#else +#define CDC_ENDPOINT 1 +#endif +#define USBD_CDC_ACM_ENABLE CDC_ENDPOINT +#define USBD_CDC_ACM_EP_INTIN 5 +#define USBD_CDC_ACM_EP_INTIN_STACK 0 +#define USBD_CDC_ACM_WMAXPACKETSIZE 16 +#define USBD_CDC_ACM_BINTERVAL 32 +#define USBD_CDC_ACM_HS_ENABLE 0 +#define USBD_CDC_ACM_HS_WMAXPACKETSIZE 16 +#define USBD_CDC_ACM_HS_BINTERVAL 2 +#define USBD_CDC_ACM_EP_BULKIN 6 +#define USBD_CDC_ACM_EP_BULKOUT 7 +#define USBD_CDC_ACM_EP_BULKIN_STACK 0 +#define USBD_CDC_ACM_WMAXPACKETSIZE1 64 +#define USBD_CDC_ACM_HS_ENABLE1 0 +#define USBD_CDC_ACM_HS_WMAXPACKETSIZE1 64 +#define USBD_CDC_ACM_HS_BINTERVAL1 0 +#define USBD_CDC_ACM_CIF_STRDESC L"mbed Serial Port" +#define USBD_CDC_ACM_DIF_STRDESC L"mbed Serial Port" +#define USBD_CDC_ACM_SENDBUF_SIZE 64 +#define USBD_CDC_ACM_RECEIVEBUF_SIZE 64 +#if (((USBD_CDC_ACM_HS_ENABLE1) && (USBD_CDC_ACM_SENDBUF_SIZE < USBD_CDC_ACM_HS_WMAXPACKETSIZE1)) || (USBD_CDC_ACM_SENDBUF_SIZE < USBD_CDC_ACM_WMAXPACKETSIZE1)) +#error "Send Buffer size must be larger or equal to Bulk In maximum packet size!" +#endif +#if (((USBD_CDC_ACM_HS_ENABLE1) && (USBD_CDC_ACM_RECEIVEBUF_SIZE < USBD_CDC_ACM_HS_WMAXPACKETSIZE1)) || (USBD_CDC_ACM_RECEIVEBUF_SIZE < USBD_CDC_ACM_WMAXPACKETSIZE1)) +#error "Receive Buffer size must be larger or equal to Bulk Out maximum packet size!" +#endif + +// <e0> Custom Class Device +// <i> Enables USB Custom Class Requests +// <i> Class IDs: +// <i> 0x00 - Class Reserved ID +// <i> 0x01 - Class Audio ID +// <i> 0x02 - Class Communications ID +// <i> 0x03 - Class Human Interface ID +// <i> 0x04 - Class Monitor ID +// <i> 0x05 - Class Physical Interface ID +// <i> 0x06 - Class Power ID +// <i> 0x07 - Class Printer ID +// <i> 0x08 - Class Storage ID +// <i> 0x09 - Class HUB ID +// <i> 0xEF - Class Miscellaneous ID +// <i> 0xFF - Class Vendor Specific ID +// </e> +#define USBD_CLS_ENABLE 0 + +// WebUSB support +#define USBD_WEBUSB_ENABLE WEBUSB_INTERFACE +#define USBD_WEBUSB_VENDOR_CODE 0x21 +#define USBD_WEBUSB_LANDING_URL "os.mbed.com/webusb/landing-page/?bid=" +#define USBD_WEBUSB_ORIGIN_URL "os.mbed.com/" + +// Microsoft OS Descriptors 2.0 (WinUSB) support +#define USBD_WINUSB_ENABLE WINUSB_INTERFACE +#define USBD_WINUSB_VENDOR_CODE 0x20 +// </e> +// </e> + +#ifndef BULK_ENDPOINT +#define BULK_ENDPOINT 0 +#else +#define BULK_ENDPOINT 1 +#endif +#define USBD_BULK_ENABLE BULK_ENDPOINT +#define USBD_BULK_EP_BULKIN 1 +#define USBD_BULK_EP_BULKOUT 2 +#define USBD_BULK_EP_BULKIN_SWO 10 +#define USBD_BULK_WMAXPACKETSIZE 64 +#define USBD_BULK_HS_ENABLE 0 +#define USBD_BULK_HS_WMAXPACKETSIZE 512 +#define USBD_BULK_STRDESC L"CMSIS-DAP v2" + +/* USB Device Calculations ---------------------------------------------------*/ + +#define USBD_IF_NUM_MAX (USBD_BULK_ENABLE+USBD_WEBUSB_ENABLE+USBD_HID_ENABLE+USBD_MSC_ENABLE+(USBD_ADC_ENABLE*2)+(USBD_CDC_ACM_ENABLE*2)+USBD_CLS_ENABLE) +#define USBD_MULTI_IF (USBD_CDC_ACM_ENABLE*(USBD_HID_ENABLE|USBD_MSC_ENABLE|USBD_ADC_ENABLE|USBD_CLS_ENABLE|USBD_WEBUSB_ENABLE|USBD_BULK_ENABLE)) +// #define MAX(x, y) (((x) < (y)) ? (y) : (x)) +#define USBD_EP_NUM_CALC0 MAX((USBD_HID_ENABLE *(USBD_HID_EP_INTIN )), (USBD_HID_ENABLE *(USBD_HID_EP_INTOUT!=0)*(USBD_HID_EP_INTOUT))) +#define USBD_EP_NUM_CALC1 MAX((USBD_MSC_ENABLE *(USBD_MSC_EP_BULKIN )), (USBD_MSC_ENABLE *(USBD_MSC_EP_BULKOUT))) +#define USBD_EP_NUM_CALC2 MAX((USBD_ADC_ENABLE *(USBD_ADC_EP_ISOOUT )), (USBD_CDC_ACM_ENABLE*(USBD_CDC_ACM_EP_INTIN))) +#define USBD_EP_NUM_CALC3 MAX((USBD_CDC_ACM_ENABLE*(USBD_CDC_ACM_EP_BULKIN)), (USBD_CDC_ACM_ENABLE*(USBD_CDC_ACM_EP_BULKOUT))) +#define USBD_EP_NUM_CALC4 MAX(USBD_EP_NUM_CALC0, USBD_EP_NUM_CALC1) +#define USBD_EP_NUM_CALC5 MAX(USBD_EP_NUM_CALC2, USBD_EP_NUM_CALC3) +#define USBD_EP_NUM_CALC6 MAX(USBD_EP_NUM_CALC4, USBD_EP_NUM_CALC5) +#define USBD_EP_NUM_CALC7 MAX((USBD_BULK_ENABLE*(USBD_BULK_EP_BULKIN)), (USBD_BULK_ENABLE*(USBD_BULK_EP_BULKOUT))) +#define USBD_EP_NUM MAX(USBD_EP_NUM_CALC6, USBD_EP_NUM_CALC7) + +#if (USBD_EP_NUM > 7) +#error "Max32620 only have 8 individual endpoints including EP0!" +#endif + +#if (USBD_HID_ENABLE) +#if (USBD_MSC_ENABLE) +#if ((((USBD_HID_EP_INTIN == USBD_MSC_EP_BULKIN) || \ + (USBD_HID_EP_INTIN == USBD_MSC_EP_BULKOUT))) || \ + ((USBD_HID_EP_INTOUT != 0) && \ + (USBD_HID_EP_INTOUT == USBD_MSC_EP_BULKIN) || \ + (USBD_HID_EP_INTOUT == USBD_MSC_EP_BULKOUT))) +#error "HID and Mass Storage Device Interface can not use same Endpoints!" +#endif +#endif +#if (USBD_ADC_ENABLE) +#if ((USBD_HID_EP_INTIN == USBD_ADC_EP_ISOOUT) || \ + ((USBD_HID_EP_INTOUT != 0) && \ + (USBD_HID_EP_INTOUT == USBD_ADC_EP_ISOOUT))) +#error "HID and Audio Device Interface can not use same Endpoints!" +#endif +#endif +#if (USBD_CDC_ACM_ENABLE) +#if (((USBD_HID_EP_INTIN == USBD_CDC_ACM_EP_INTIN) || \ + (USBD_HID_EP_INTIN == USBD_CDC_ACM_EP_BULKIN) || \ + (USBD_HID_EP_INTIN == USBD_CDC_ACM_EP_BULKOUT))|| \ + ((USBD_HID_EP_INTOUT != 0) && \ + ((USBD_HID_EP_INTOUT == USBD_CDC_ACM_EP_INTIN) || \ + (USBD_HID_EP_INTOUT == USBD_CDC_ACM_EP_BULKIN) || \ + (USBD_HID_EP_INTOUT == USBD_CDC_ACM_EP_BULKOUT)))) +#error "HID and Communication Device Interface can not use same Endpoints!" +#endif +#endif +#endif + +#if (USBD_MSC_ENABLE) +#if (USBD_ADC_ENABLE) +#if ((USBD_MSC_EP_BULKIN == USBD_ADC_EP_ISOOUT) || \ + (USBD_MSC_EP_BULKOUT == USBD_ADC_EP_ISOOUT)) +#error "Mass Storage Device and Audio Device Interface can not use same Endpoints!" +#endif +#endif +#if (USBD_CDC_ACM_ENABLE) +#if ((USBD_MSC_EP_BULKIN == USBD_CDC_ACM_EP_INTIN) || \ + (USBD_MSC_EP_BULKIN == USBD_CDC_ACM_EP_BULKIN) || \ + (USBD_MSC_EP_BULKIN == USBD_CDC_ACM_EP_BULKOUT) || \ + (USBD_MSC_EP_BULKOUT == USBD_CDC_ACM_EP_INTIN) || \ + (USBD_MSC_EP_BULKOUT == USBD_CDC_ACM_EP_BULKIN) || \ + (USBD_MSC_EP_BULKOUT == USBD_CDC_ACM_EP_BULKOUT)) +#error "Mass Storage Device and Communication Device Interface can not use same Endpoints!" +#endif +#endif +#endif + +#if (USBD_ADC_ENABLE) +#if (USBD_CDC_ACM_ENABLE) +#if ((USBD_ADC_EP_ISOOUT == USBD_CDC_ACM_EP_INTIN) || \ + (USBD_ADC_EP_ISOOUT == USBD_CDC_ACM_EP_BULKIN) || \ + (USBD_ADC_EP_ISOOUT == USBD_CDC_ACM_EP_BULKOUT)) +#error "Audio Device and Communication Device Interface can not use same Endpoints!" +#endif +#endif +#endif +#define USBD_ADC_CIF_NUM (0) +#define USBD_ADC_SIF1_NUM (1) +#define USBD_ADC_SIF2_NUM (2) + + +#define USBD_ADC_CIF_STR_NUM (3+USBD_STRDESC_SER_ENABLE+0) +#define USBD_ADC_SIF1_STR_NUM (3+USBD_STRDESC_SER_ENABLE+1) +#define USBD_ADC_SIF2_STR_NUM (3+USBD_STRDESC_SER_ENABLE+2) +#define USBD_CDC_ACM_CIF_STR_NUM (3+USBD_STRDESC_SER_ENABLE+USBD_ADC_ENABLE*3+0) +#define USBD_CDC_ACM_DIF_STR_NUM (3+USBD_STRDESC_SER_ENABLE+USBD_ADC_ENABLE*3+1) +#define USBD_HID_IF_STR_NUM (3+USBD_STRDESC_SER_ENABLE+USBD_ADC_ENABLE*3+USBD_CDC_ACM_ENABLE*2) +#define USBD_WEBUSB_IF_STR_NUM (3+USBD_STRDESC_SER_ENABLE+USBD_ADC_ENABLE*3+USBD_CDC_ACM_ENABLE*2+USBD_HID_ENABLE) +#define USBD_MSC_IF_STR_NUM (3+USBD_STRDESC_SER_ENABLE+USBD_ADC_ENABLE*3+USBD_CDC_ACM_ENABLE*2+USBD_HID_ENABLE+USBD_WEBUSB_ENABLE) +#define USBD_BULK_IF_STR_NUM (3+USBD_STRDESC_SER_ENABLE+USBD_ADC_ENABLE*3+USBD_CDC_ACM_ENABLE*2+USBD_HID_ENABLE+USBD_WEBUSB_ENABLE+USBD_BULK_ENABLE) + +#if (USBD_HID_ENABLE) +#if (USBD_HID_HS_ENABLE) +#define USBD_HID_MAX_PACKET ((USBD_HID_HS_WMAXPACKETSIZE > USBD_HID_WMAXPACKETSIZE) ? USBD_HID_HS_WMAXPACKETSIZE : USBD_HID_WMAXPACKETSIZE) +#else +#define USBD_HID_MAX_PACKET (USBD_HID_WMAXPACKETSIZE) +#endif +#else +#define USBD_HID_MAX_PACKET (0) +#endif +#if (USBD_MSC_ENABLE) +#if (USBD_MSC_HS_ENABLE) +#define USBD_MSC_MAX_PACKET ((USBD_MSC_HS_WMAXPACKETSIZE > USBD_MSC_WMAXPACKETSIZE) ? USBD_MSC_HS_WMAXPACKETSIZE : USBD_MSC_WMAXPACKETSIZE) +#else +#define USBD_MSC_MAX_PACKET (USBD_MSC_WMAXPACKETSIZE) +#endif +#else +#define USBD_MSC_MAX_PACKET (0) +#endif +#if (USBD_ADC_ENABLE) +#if (USBD_ADC_HS_ENABLE) +#define USBD_ADC_MAX_PACKET ((USBD_ADC_HS_WMAXPACKETSIZE > USBD_ADC_WMAXPACKETSIZE) ? USBD_ADC_HS_WMAXPACKETSIZE : USBD_ADC_WMAXPACKETSIZE) +#else +#define USBD_ADC_MAX_PACKET (USBD_ADC_WMAXPACKETSIZE) +#endif +#else +#define USBD_ADC_MAX_PACKET (0) +#endif +#if (USBD_CDC_ACM_ENABLE) +#if (USBD_CDC_ACM_HS_ENABLE) +#define USBD_CDC_ACM_MAX_PACKET ((USBD_CDC_ACM_HS_WMAXPACKETSIZE > USBD_CDC_ACM_WMAXPACKETSIZE) ? USBD_CDC_ACM_HS_WMAXPACKETSIZE : USBD_CDC_ACM_WMAXPACKETSIZE) +#else +#define USBD_CDC_ACM_MAX_PACKET (USBD_CDC_ACM_WMAXPACKETSIZE) +#endif +#if (USBD_CDC_ACM_HS_ENABLE1) +#define USBD_CDC_ACM_MAX_PACKET1 ((USBD_CDC_ACM_HS_WMAXPACKETSIZE1 > USBD_CDC_ACM_WMAXPACKETSIZE1) ? USBD_CDC_ACM_HS_WMAXPACKETSIZE1 : USBD_CDC_ACM_WMAXPACKETSIZE1) +#else +#define USBD_CDC_ACM_MAX_PACKET1 (USBD_CDC_ACM_WMAXPACKETSIZE1) +#endif +#else +#define USBD_CDC_ACM_MAX_PACKET (0) +#define USBD_CDC_ACM_MAX_PACKET1 (0) +#endif + +#if (USBD_BULK_ENABLE) +#if (USBD_BULK_HS_ENABLE) +#define USBD_BULK_MAX_PACKET ((USBD_BULK_HS_WMAXPACKETSIZE > USBD_BULK_WMAXPACKETSIZE) ? USBD_BULK_HS_WMAXPACKETSIZE : USBD_BULK_WMAXPACKETSIZE) +#else +#define USBD_BULK_MAX_PACKET (USBD_BULK_WMAXPACKETSIZE) +#endif +#else +#define USBD_BULK_MAX_PACKET (0) +#endif + +#define USBD_MAX_PACKET_CALC0 ((USBD_HID_MAX_PACKET > USBD_HID_MAX_PACKET ) ? (USBD_HID_MAX_PACKET ) : (USBD_HID_MAX_PACKET )) +#define USBD_MAX_PACKET_CALC1 ((USBD_ADC_MAX_PACKET > USBD_CDC_ACM_MAX_PACKET ) ? (USBD_ADC_MAX_PACKET ) : (USBD_CDC_ACM_MAX_PACKET )) +#define USBD_MAX_PACKET_CALC2 ((USBD_MAX_PACKET_CALC0 > USBD_MAX_PACKET_CALC1 ) ? (USBD_MAX_PACKET_CALC0) : (USBD_MAX_PACKET_CALC1 )) +#define USBD_MAX_PACKET_CALC3 ((USBD_BULK_MAX_PACKET > USBD_CDC_ACM_MAX_PACKET1 ) ? (USBD_BULK_MAX_PACKET) : (USBD_CDC_ACM_MAX_PACKET1 )) +#define USBD_MAX_PACKET ((USBD_MAX_PACKET_CALC3 > USBD_MAX_PACKET_CALC2 ) ? (USBD_MAX_PACKET_CALC3) : (USBD_MAX_PACKET_CALC2 )) + + +/*------------------------------------------------------------------------------ + * USB Config Functions + *----------------------------------------------------------------------------*/ + +#ifndef __USB_CONFIG___ +#define __USB_CONFIG__ + +#ifndef __NO_USB_LIB_C +#include "usb_lib.c" +#endif + +#endif /* __USB_CONFIG__ */